scholarly journals PREDICTION OF THE LIMITING STATE OF THE SHELLS BASED ON DIGITAL MODELS

2021 ◽  
pp. 112
Author(s):  
K.N. Abdrakhmanova
Keyword(s):  
Digital Models ◽  
Limiting State

Structure of the meloriative complex of the Republic of Belarus and the drynage of heavy soils on the example of Vitebsk region

2020 ◽  
pp. 23-28
Author(s):  
Aleksandr Anzhenkov ◽  
V. Makoed
Keyword(s):  
Digital Models ◽  
Modern Approach ◽  
The Republic ◽  
Effective Drainage

The structure of the reclamation complex of the Republic of Belarus is given. The main problems of drainage of heavy soils are considered. A modern approach to the design of reclamation systems using digital models is proposed. Constructive solutions for the effective drainage of heavy soils are proposed

Influence of the choice of wear criterion on the life of high speed machine manual taps

2020 ◽  
pp. 74-78
Author(s):  
A.E. Dreval
Keyword(s):  
Service Life ◽  
Structural Steel ◽  
Tool Life ◽  
High Speed ◽  
High Speed Steel ◽  
Parameter Dependence ◽  
Limiting State ◽  
Thread Cutting ◽  
Failure Life ◽  
High Speed Machine

The assessment of the limiting state of high-speed machine-manual taps in the processing of structural steel billets is considered. A general multi-parameter dependence is developed for calculating the criterion of allowable wear, which makes it possible to rationally use the tool life and normalize the cut amount during regrinding. Keywords thread cutting, tap, angle of the cutting part, criterion, high-speed steel, wear, failure, life, service life. [email protected]

GIS Technologies in Course of Mathematical Cartography

2017 ◽  
Vol 921 (3) ◽  
pp. 30-35
Author(s):  
N.G. Ivlieva ◽  
V.F. Manukhov
Keyword(s):  
Software Tools ◽  
Digital Models ◽  
Map Projection ◽  
Gis Technologies ◽  
Surface Distortion ◽  
Nodal Points ◽  
Projection Properties ◽  
Special Software

GIS are closely related to mathematical cartography, as they work with spatially coordinated data. Practical course in mathematical cartography should meet the requirements of time and include tasks involving the use of modern GIS technologies. The functionality of GIS packages allow you to easily create maps in a given map projection, draw graticules and measured grids, perform dimensions on maps. This article is devoted to the research of map projection properties on the basis of GIS technologies in a practical course of mathematical cartography. The focus is on visual way to display local and regional distortions on maps. To create lines of equal distortion should use special software tools that allow to build digital models of surface distortion distribution directly on formulas or be interpolated both discretely located nodal points and isolines.

New digital models of care in ophthalmology, during and beyond the COVID-19 pandemic

2021 ◽  
pp. bjophthalmol-2020-317683
Author(s):  
Yih-Chung Tham ◽  
Rahat Husain ◽  
Kelvin Yi Chong Teo ◽  
Anna Cheng Sim Tan ◽  
Annabel Chee Yen Chew ◽  
...  
Keyword(s):  
Business Models ◽  
Digital Health ◽  
Models Of Care ◽  
Clinical Practices ◽  
Digital Models ◽  
Face To Face ◽  
Potential Barriers ◽  
Digital Business Models ◽  
Brick And Mortar ◽  
Clinical Models

COVID-19 has led to massive disruptions in societal, economic and healthcare systems globally. While COVID-19 has sparked a surge and expansion of new digital business models in different industries, healthcare has been slower to adapt to digital solutions. The majority of ophthalmology clinical practices are still operating through a traditional model of ‘brick-and-mortar’ facilities and ‘face-to-face’ patient–physician interaction. In the current climate of COVID-19, there is a need to fuel implementation of digital health models for ophthalmology. In this article, we highlight the current limitations in traditional clinical models as we confront COVID-19, review the current lack of digital initiatives in ophthalmology sphere despite the presence of COVID-19, propose new digital models of care for ophthalmology and discuss potential barriers that need to be considered for sustainable transformation to take place.

scholarly journals A New Method to Evaluate Trueness and Precision of Digital and Conventional Impression Techniques for Complete Dental Arch

2021 ◽  
Vol 11 (10) ◽  
pp. 4612
Author(s):  
KweonSoo Seo ◽  
Sunjai Kim
Keyword(s):  
Intraclass Correlation ◽  
Three Dimensional ◽  
New Method ◽  
Digital Impression ◽  
Dental Arch ◽  
Digital Models ◽  
Digital Impressions ◽  
Measuring Machine ◽  
Master Model ◽  
Conventional Impression

Purpose: The aim of this study was to present a new method to analyze the three-dimensional accuracy of complete-arch dental impressions and verify the reliability of the method. Additionally, the accuracies of conventional and intraoral digital impressions were compared using the new method. Methods: A master model was fabricated using 14 milled polyetheretherketone cylinders and a maxillary acrylic model. Each cylinder was positioned and named according to its corresponding tooth position. Twenty-five definitive stone casts were fabricated using conventional impressions of the master model. An intraoral scanner was used to scan the master model 25 times to fabricate 25 digital models. A coordinate measuring machine was used to physically probe each cylinder in the master model and definitive casts. An inspection software was used to probe cylinders of digital models. A three-dimensional part coordinate system was defined and used to compute the centroid coordinate of each cylinder. Intraclass correlation coefficient (ICC) was evaluated to examine the reliability of the new method. Independent two sample t-test was performed to compare the trueness and precision of conventional and intraoral digital impressions (α = 0.05). Results: ICC results showed that, the new method had almost perfect reliability for the measurements of the master model, conventional and digital impression. Conventional impression showed more accurate absolute trueness and precision than intraoral digital impression for most of the tooth positions (p < 0.05). Conclusions: The new method was reliable to analyze the three-dimensional deviation of complete-arch impressions. Conventional impression was still more accurate than digital intraoral impression for complete arches.

scholarly journals A Reference Framework to Combine Model-Based Design and AR to Improve Social Sustainability

2021 ◽  
Vol 13 (4) ◽  
pp. 2031
Author(s):  
Fabio Grandi ◽  
Riccardo Karim Khamaisi ◽  
Margherita Peruzzini ◽  
Roberto Raffaeli ◽  
Marcello Pellicciari
Keyword(s):  
Positive Impact ◽  
Cost Effective ◽  
Digital Models ◽  
Model Based ◽  
Digital Contents ◽  
Recent Developments ◽  
Virtual Simulations ◽  
Product And Process ◽  
The Impact ◽  
Time Information

Product and process digitalization is pervading numerous areas in the industry to improve quality and reduce costs. In particular, digital models enable virtual simulations to predict product and process performances, as well as to generate digital contents to improve the general workflow. Digital models can also contain additional contents (e.g., model-based design (MBD)) to provide online and on-time information about process operations and management, as well as to support operator activities. The recent developments in augmented reality (AR) offer new specific interfaces to promote the great diffusion of digital contents into industrial processes, thanks to flexible and robust applications, as well as cost-effective devices. However, the impact of AR applications on sustainability is still poorly explored in research. In this direction, this paper proposed an innovative approach to exploit MBD and introduce AR interfaces in the industry to support human intensive processes. Indeed, in those processes, the human contribution is still crucial to guaranteeing the expected product quality (e.g., quality inspection). The paper also analyzed how this new concept can benefit sustainability and define a set of metrics to assess the positive impact on sustainability, focusing on social aspects.

scholarly journals Comparative Analysis of Digital Models of Objects of Cultural Heritage Obtained by the “3D SLS” and “SfM” Methods

2021 ◽  
Vol 11 (12) ◽  
pp. 5321
Author(s):  
Marcin Barszcz ◽  
Jerzy Montusiewicz ◽  
Magdalena Paśnikowska-Łukaszuk ◽  
Anna Sałamacha
Keyword(s):  
Cultural Heritage ◽  
Low Cost ◽  
Three Dimensional ◽  
3D Models ◽  
Silk Road ◽  
Digital Models ◽  
Global Pandemic ◽  
University Of Technology ◽  
Three Dimensional Models ◽  
3D Digitisation

In the era of the global pandemic caused by the COVID-19 virus, 3D digitisation of selected museum artefacts is becoming more and more frequent practice, but the vast majority is performed by specialised teams. The paper presents the results of comparative studies of 3D digital models of the same museum artefacts from the Silk Road area generated by two completely different technologies: Structure from Motion (SfM)—a method belonging to the so-called low-cost technologies—and by Structured-light 3D Scanning (3D SLS). Moreover, procedural differences in data acquisition and their processing to generate three-dimensional models are presented. Models built using a point cloud were created from data collected in the Afrasiyab museum in Samarkand (Uzbekistan) during “The 1st Scientific Expedition of the Lublin University of Technology to Central Asia” in 2017. Photos for creating 3D models in SfM technology were taken during a virtual expedition carried out under the “3D Digital Silk Road” program in 2021. The obtained results show that the quality of the 3D models generated with SfM differs from the models from the technology (3D SLS), but they may be placed in the galleries of the vitrual museum. The obtained models from SfM do not have information about their size, which means that they are not fully suitable for archiving purposes of cultural heritage, unlike the models from SLS.

scholarly journals Teaching digital models: secondary technology teachers’ experiences

2021 ◽  
Author(s):  
Helen Brink ◽  
Nina Kilbrink ◽  
Niklas Gericke
Keyword(s):  
Problem Solving ◽  
Empirical Data ◽  
Digital Tools ◽  
Digital Models ◽  
Structured Interviews ◽  
Digital Competence ◽  
Technology Teachers ◽  
Teachers Experiences ◽  
Digital Modelling ◽  
Single Idea

AbstractIn secondary technology education, models of artifacts, systems and processes, visualized and simulated through digital tools (digital models) are a relatively new element. Technology teachers teach digital models to meet syllabus criteria of digital competence, applicable to for instance problem solving and documentation using digital tools. However, there is a lack of knowledge concerning how teachers use digital models in their teaching, what their intentions are, and what content they choose. It is known, though, that teachers’ experiences influence the teaching. Therefore, the aim of this study is to investigate teachers’ experiences of teaching digital models in compulsory school, to contribute to more knowledge of teaching in this area. This study takes a phenomenological lifeworld approach, and 12 semi-structured interviews with lower secondary technology teachers form the empirical data. The data were analyzed thematically and the results are four themes of experiencing the teaching of digital models, indicating that technology teachers teach with different aims and purposes; Enhancing and integrating other subjects, Visualizing technology to the pupils, Enabling digital modelling, and Preparing pupils for the future. Further, the results also indicate that the content and methods of teaching differ and that teachers did not experience digital models as one single idea but as an amalgam of multiple ideas. These findings can be used as a basis for further research and development of teaching concerning digital models.

Sign in / Sign up

Export Citation Format

Share Document