scholarly journals Developing skills for neutronic modelling of nuclear power reactors in South Africa

2016 ◽  
Vol 27 (4) ◽  
pp. 64 ◽  
Author(s):  
Gezekile Nyalunga ◽  
Vishana Naicker ◽  
Maria Du Toit

In recent years, due to economic and social infrastructure development and growth, South Africa has been facing growth in energy demand. Addressing this demand includes building more coal power stations, however with attention paid in designing them to reduce greenhouse gas emissions. A second response is to deploy more power sources using renewable and nuclear energy. The South African government has plans to add about 9.6 GW of nuclear energy to the electricity grid. Accepting that South Africa will seek an international vendor or vendors to supply nuclear plants, a certain degree of localisation of manufacture and operation should be planned. One localisation task that can be actively pursued is reactor analysis, including criticality, burnup, shielding and accident analysis of the reactor. Such development of expertise will support both economic and safety aspects of building and running a nuclear reactor. With this in mind, neutronic analysis of the VVER 1000 reactor was initiated. The government’s intention to build a new fleet of reactors means it is important that the VVER-1000 reactor be included in studies done by the reactor analysis group at the School of Mechanical and Nuclear Engineering at the North-West University. The analysis was performed using MCNP6 for the cold zero power state at the beginning of cycle with the specifications obtained from the open literature. The input file was generated using the in-house code NWURCS. To ensure accuracy and precision of the results produced by the MCNP6 code, convergence studies of the MCNP6 models were carried out. Once a satisfactory model was obtained, the critical reactor state was calculated by adjusting the boron concentration in the water. Furthermore, the control rod worth, reactivity coefficients and beff were also calculated and are reported in this paper.

2008 ◽  
Vol 1100 ◽  
Author(s):  
Liviu Popa-Simil

AbstractThe advanced space missions need for more power opened the way for advanced nuclear reactors and for alternative power conversion procedures. The most advanced power systems available in space are the fuel cells and nuclear reactors. Both systems manifest low efficiencies for converting the primary energy into electricity and as consequence are requiring high heat dump into space mainly by infrared radiation. The thermo-nuclear power generator also requires a high temperature gas turbine and a mechano-electric generator, finally driving to low conversion efficiencies. The new nano-materials offer the possibility of creating direct energy conversion devices able of achieving high conversion efficiencies up to 99% in the cryogenic versions. The interest for direct conversion of the nuclear energy into electricity appeared in early 1940th, by the invention of the thermo-ionic fission device by Linder. Then a series of patents and scientific papers improved gradually the designs and performances of the devices, up to the actual concepts of beta-voltaic and liquid-electronics. The most intuitive direct conversion device looks mainly like a super mirror- or a heterogeneous super-capacitor. The issues on its operation are related to global conversion efficiencies and the stable operation life-time in high radiation field. There are combinations of nano-structures and actinides assuring both the neutron flux stability, by meeting criticality conditions and the direct conversion or the nuclear energy into electricity. Achieving a high efficiency internal conversion of the nuclear energy into electricity is not enough if it is not completed by a high efficiency power extraction system from the nuclear reactor core into the outside load. The development of the new MEMS devices and micro electronics in the 40 nm technologies provides an excellent background for the production of the electric power harvesting and conversion devices embedded in the fuel. The new nano-structured materials may be produced as radiation energy harvesting tiles that are free of actinides, using them for harvesting the energy of radioactive sources and controlled fusion devices, or may include actinides in their structure achieving critical or sub-critical accelerator driven nuclear reactor assemblies. Another predictable advantage of the nano-structure is the property of self-repairing and self-organizing to compensate the radiation damage and improve the lifetime. Due to direct conversion the power density of the new materials may increase from the actual average of 0.2 kw/cm3 to about 1 kw/mm3 driving to miniaturization of nuclear power sources and reductions of the shield weight. At these dimensions and power densities of few thousands horse power per liter the nuclear power source becomes suitable for mobile applications as powering trains, strategic airplanes, etc. These new developments may drive to the production of high power solid-state compact nuclear battery for space applications, leading to a new development stage.


2021 ◽  
Vol 12 (2) ◽  
pp. 64-75
Author(s):  
Fortunate Mtshali Thobile ◽  
Ntanganedzeni Mapholi Olivia ◽  
Tebogo Ncube Keabetswe ◽  
Farai Dzomba Edgar ◽  
C. Matelele Tlou ◽  
...  

Author(s):  
W.N. Minnaar ◽  
R.C. Krecek

Information on the socioeconomic aspects and the health status of dogs in 2 resource-limited communities in the North West and Gauteng provinces of South Africa was gathered using semi-structured interviews and a standardised questionnaire. The dogs were examined clinically to determine their health status, and their body condition and age were scored. Most of the dogs (93 % in Jericho and 90 % in Zuurbekom) were infected with hookworm, which poses a threat to animal and human health in the 2 study areas. Many dogs were also being given a protein-deficient diet, which together with hookworm parasites would impact considerably on the dog's health. Dogs were mainly kept for security reasons. The need indicated to be most important by the residents of the 2 commnities was a lack of available and affordable veterinary services.


Author(s):  
Б.Л. Пхарое ◽  
А.Н. Евдокимов

Северо-западный регион ЮАР до недавнего времени не являлся промышленно марганценосным. Однако результаты изучения последних лет дают основание думать, что здесь могут быть залежи марганцевых руд. Марганцевое оруденение в этом регионе встречается в виде марганцевых конкреций, порошкообразного марганцевого вада и марганцевых корок в коре выветривания. Марганцевые конкреции приурочены к аллювиальной части «Westwits alluvium» рудного разреза и марганцевый вад накоплялся в карстовых структурах, образовавшихся в результате приповерхностного выветривания, выщелачивания и растворения подстилающих марганценосных неоархейских доломитов. Предполагается два потенциальных источника марганца: первый расположен непосредственно под рудным телом, а второй – на существенном удалении от него. Если первый источник рудного вещества поставлял марганец из подстилающих доломитов в процессе их выветривания, то второй вариант подразумевает существенный перенос металла из неизвестных коренных источников, расположенных на значительном удалении от области рудонакопления. Таким образом, для решения этого вопроса, необходимо провести экспериментальные исследования, изучающие природу, минералогию и источник сноса терригенных отложений «вмещающих материалов» верхнего рудного разреза. Цель работы – уточнить природу марганценосных терригенных залежей «Westwits alluvium» и, что самое важное, определить их коренной источник поступления и собственно минеральный состав. Методики исследования включали: петрографическое описание пород, геохимические анализы методами XRF и SEM, подсчеты объемного состава детритовых минералов и анализ дискриминационных диаграмм. Результаты. В результате проведенных исследований было установлено, что терригенные зёрна в основном представлены кварцем. Содержание полевых шпатов, минералов цемента и глинистых минералов не более 20 %. Использована классификация составов терригенного материала, основанная на подсчете в объемных процентах зерен кварца, полевого шпата, обломочных зерен других пород (вулканических, магматических и метаморфических пород), слюды и др. По этим данным были определены вероятные источники сноса, которыми являются породы Рэнд-Антиклинального хребта, расположенного к югу от изучаемого региона, а также архейские граниты, гнейсы и мафические-ультрамафические породы Каапваальского кратона. Осадконакопление происходило в низменной равнине с тропическим умеренно влажным и субгумидным климатом. Здесь, при повышенном рН воды происходило интенсивное выщелачивание пород и замещение детритовых зерен разного минерального состава диоксидом марганца. Ключевые слова: марганцовистый аллювий, третичный, терригенные отложения, Каапваальский кратон, Южная Африка The North-West region of the Republic of South Africa was previously not considered to constitute of manganese mineralization of industrial value. However, recently published articles indicated the presence of secondary manganese mineralization in the weathering crust, underlain by the manganiferous Neoarchean dolomites. Manganese mineralization in this region occurs in the form of manganese nodules, powdered manganese wad, and manganese crusts. Manganese nodules are confined to the alluvial part of the ore section known as the «Westwits alluvium» and manganese wad is accumulated in karstic structures formed as a result of near-surface weathering, leaching, and dissolution of underlying manganese-bearing Neoarchean dolomites. Two potential sources of manganese are assumed: the first relates to the dolomites which are located directly under the ore body, and the second relates to the source areas of terrigenous deposits. If the first hypothesis suggests that manganese ore substances were supplied from the underlying dolomites during their weathering, the second option then implies a significant transfer of metal from unknown root sources located at a considerable distance from the area of ore accumulation. Thus, it is necessary to conduct petrographic study to reconstruct their source regions and understand the close relations with Mn mineralization. Aim is to clarify the nature of the manganese-bearing terrigenous deposits «Westwits alluvium» and, most importantly, to determine their root source of supply and the actual mineral composition. Methodology of study includes mainly: petrographic study of rocks, geochemical analyses with the use of XRF and SEM methods, modal compositional analysis of the detrital minerals, and analysis of discrimination diagrams. Results. As a result of the conducted research, it was found that terrigenous grains consist mainly of detrital quartz grains. The content of feldspars, cement minerals and clay minerals seldom exceeds 20 %. The classification of terrigenous material based on the calculation of the volumetric percentage of the detrital framework grains: quartz, feldspar, clastic grains of other rocks types (volcanic, igneous and metamorphic rocks), mica, indicated probable source areas of the terrigenous sediments. These include metasedimentary rocks of the Rand Anticline Ridge which is located south of the studied region, and Archean granites, gneisses, and mafic-ultramafic rocks of the Kaapvaal Craton. In the basin of deposition, sedimentation occurred in a lowland plain within tropical region, characterized by moderately humid and sub-humid climatic conditions. These conditions, combined with oxidation and increased pH of the basin waters, contributed to the replacement of detrital grains with manganese dioxide


Sign in / Sign up

Export Citation Format

Share Document