Examples of iodine as micronutrient in plants, for improvement of the main commercial greenhouse crops cultivation

2021 ◽  
pp. 205-212
Author(s):  
K. Hora ◽  
H.T. Holwerda
Keyword(s):  
Author(s):  
Mario Vincenzo Russo ◽  
Ivan Notardonato ◽  
Alberto Rosada ◽  
Giuseppe Ianiri ◽  
Pasquale Avino

This paper shows a characterization of the organic and inorganic fraction of river waters (Tiber and Marta) and ores/soil samples collected in the Northern Latium region of Italy for evaluating the anthropogenic/natural source contribution to the environmental pollution of this area. For organic compounds, organochloride volatile compounds in Tiber and Marta rivers were analyzed by two different clean-up methods (i.e., liquid–liquid extraction and static headspace) followed by gas chromatography–electron capture detector (GC-ECD) analysis. The results show very high concentrations of bromoform (up to 1.82 and 3.2 µg L−1 in Tiber and Marta rivers, respectively), due to the presence of greenhouse crops, and of chloroform and tetrachloroethene, due to the presence of handicrafts installations. For the qualitative and quantitative assessment of the inorganic fraction, it is highlighted the use of a nuclear analytical method, instrumental neutron activation analysis, which allows having more information as possible from the sample without performing any chemical-physical pretreatment. The results have evidenced high levels of mercury (mean value 88.6 µg g−1), antimony (77.7 µg g−1), strontium (12,039 µg g−1) and zinc (103 µg g−1), whereas rare earth elements show levels similar to the literature data. Particular consideration is drawn for arsenic (414 µg g−1): the levels found in this paper (ranging between 1 and 5100 µg g−1) explain the high content of such element (as arsenates) in the aquifer, a big issue in this area.


1999 ◽  
Vol 73 (2) ◽  
pp. 131-139 ◽  
Author(s):  
S. de la Plaza ◽  
R.M. Benavente ◽  
J.L. Garcı́a ◽  
L.M. Navas ◽  
L. Luna ◽  
...  

2014 ◽  
Vol 1049-1050 ◽  
pp. 1163-1166
Author(s):  
Bo Chang ◽  
Xin Rong Zhang ◽  
Li Hong Li

In order to accurately collect the environmental parameters (such as temperature, humidity, illumination, etc.), which influence growth of greenhouse crops, the paper proposed a design for greenhouse environment monitoring based on CAN bus and wireless sensor networks (WSNs). The communication network of the system consists of two parts: the backbone network being constructed by CAN bus and area network being constructed by WSNs. At the same time, the designed of hardware and software about the system is illustrated in detail. System architecture indicates that the system is an effective solution for greenhouse environment monitoring.


2021 ◽  
Vol 13 (15) ◽  
pp. 8310
Author(s):  
Hicham Fatnassi ◽  
Thierry Boulard ◽  
Christine Poncet ◽  
Nikolaos Katsoulas ◽  
Thomas Bartzanas ◽  
...  

This work aims at using the Computational Fluid Dynamic (CFD) approach to study the distributed microclimate in the leaf boundary layer of greenhouse crops. Understanding the interactions in this microclimate of this natural habitat of plant pests (i.e., boundary layer of leaves), is a prerequisite for their control through targeted climate management for sustainable greenhouse production. The temperature and humidity simulations, inside the greenhouse, were performed using CFD code which has been adapted to simulate the plant activity within each mesh in the crop canopy. The air temperature and air humidity profiles within the boundary layer of leaves were deduced from the local surrounding climate parameters, based on an analytical approach, encapsulated in a Used Defined Function (UDF), and dynamically linked to the CFD solver, a work that forms an innovative and original task. Thus, this model represents a new approach to investigate the microclimate in the boundary layer of leaves under greenhouses, which resolves the issue of the inaccessibility of this area by the conventionnel measurement tools. The findings clearly showed that (i) contrarily to what might be expected, the microclimate parameters within the boundary layer of leaves are different from the surrounding climate in the greenhouse. This is particularly visible during photoperiods when the plant’s transpiration activity is at its maximum and that (ii) the climatic parameters in the leaf boundary layer are more coupled with leaf surfaces than with those of greenhouse air. These results can help developing localized intervention strategies on the microclimate within boundary layer of plant leaves, leading to improved and sustainable pest control management. The developed climatic strategies will make it possible to optimize resources use efficiency.


2021 ◽  
Vol 234 ◽  
pp. 00062
Author(s):  
Samir Didi ◽  
Abdelkrim El hassini

To meet the climatic needs of plants, there is a growing interest in the development of methods to automatically and continuously detect the constraints on plants, and to use water and nutrients under greenhouse crops in a rational way. The objective of this work is consecrated to the development of a software for the control and supervision of climatic parameters under greenhouses by an automatic process using LabVIEW. The system carried out makes it possible to measure the various values of the physical sizes resulting from various sensors (temperature, humidity, illumination, content of CO2, moisture of the ground,…). In order to visualize in real time, the evolution of the various climatic parameters, a graphic interface of supervision was developed by using the programming language LabVIEW. The latter makes it possible to integrate functions of control such as the modification of the instructions and the control commands to maintain the conditions adapted to the culture under greenhouse. The installation of such a strategy must take account of the economy of the water resources, nutritive elements and electric power while making it possible to the farmers to increase their productions as well in quantity and in quality.


2021 ◽  
pp. 71-75
Author(s):  
G. M. Mustafaev ◽  
A. A. Magomedova ◽  
S. M. Mursalov ◽  
A. Ch. Sapukova ◽  
M. M. Khalikov

Relevance. The water regime is one of the main processes in the life of the plant, optimizing which can increase the yield of cultivated crops. In protected ground conditions, the plants' water needs are met exclusively by irrigation. Irrigation is the most important means of increasing the yield of greenhouse crops, including tomato. Greenhouse tomatoes are very demanding on soil moisture, as well as on air humidity. To combat overheating of the air and plants, and to increase the relative humidity of the air in greenhouses, plants for evaporative cooling and humidification of plants are successfully used, which are especially effective in drip irrigation. The combination of drip irrigation with evaporative cooling makes it possible to control the water regime of the soil and air habitat of plants.Materials and Methods. The purpose of the research: to identify the most optimal method of water supply for greenhouse tomatoes. The research was conducted in 2018-2019 in the greenhouse complex "Yugagroholding", located in the suburbs of the city of Makhachkala. The object of research was a hybrid of tomato Mei shuai. The experiments included three options: sprinkling, drip irrigation, and drip irrigation with evaporative cooling.Results. The comparative characteristics of irrigation methods by yield are presented, the results of which indicate the advantage of the second and third options over sprinkling: the highest yield was obtained in the third option and amounted to 14.7 kg/m2 . The best methods of water supply that ensure the optimal water regime of greenhouse tomatoes are identified-drip irrigation and drip irrigation in combination with evaporative cooling, the latter is the best in most indicators. 


2012 ◽  
pp. 115-122 ◽  
Author(s):  
L. Incrocci ◽  
D. Massa ◽  
A. Pardossi ◽  
L. Bacci ◽  
P. Battista ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document