scholarly journals TREATMENT OF URBAN WASTE WATER FROM IONS OF HEAVY METALS BY USING NEW SORPTION MATERIAL

2020 ◽  
Vol 10 (2) ◽  
pp. 22-28
Author(s):  
Olga N. PANFILOVA
Keyword(s):  
Waste Water ◽  
Heavy Metal ◽  
Metal Ions ◽  
Industrial Wastewater ◽  
Heavy Metal Ions ◽  
Aeration Tank ◽  
Urban Wastewater ◽  
Urban Waste ◽  
Sorption Material ◽  
Copper Lead

The article presents the results of experiments on the removal of heavy metal ions from urban wastewater with a new sorbent -based on clay. The work was carried out in an experimental reactor (SBR) in three modes: bio-sorption treatment; sorption purifi cation; and evaluating the eff ect of the coagulant on the eff ectiveness of sorption purifi cation. The dose of sorbent used in the aeration tank to achieve standards for heavy metal ions was 10 g / l. When using the proposed sorbent in sorption purifi cation the dose of the sorbent was decreased to 1 g / l. The introduction of a coagulant with a dose of 6-8 mg / l for iron (III) had a positive eff ect on the concentration of zinc, copper, lead, aluminum and phosphates, but increased the concentration of iron in purifi ed water. The new sorbent is recommended for deep treatment of industrial wastewater with higher initial concentrations.

Utilization of Polysaccharides and their Derivatives in the Removal of Metal Ions: Role and Recent Advancement

2020 ◽  
Vol 13 ◽  
Author(s):  
Rishabha Malviya ◽  
Pramod Sharma ◽  
Akanksha Sharma
Keyword(s):  
Waste Water ◽  
Heavy Metal ◽  
Metal Ions ◽  
Industrial Waste ◽  
Heavy Metal Ions ◽  
Environmental Hazards ◽  
Industrial Waste Water ◽  
Recent Advancement ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

: Manuscript discussed about the role of polysaccharides and their derivatives in the removal of metal ions from industrial waste water. Quick modernization and industrialization increases the amount of various heavy metal ions in the environment. They can possess various disease in humans and also causes drastic environmental hazards. In this review the recent advancement for the adsorption of heavy metal ions from waste water by using different methods has been studied. Various natural polymers and their derivatives are act as effective adsorbents for the removal of heavy metal ions from the waste water released from the industries and the treated water released into the environment can decreases the chances of diseases in humans and environmental hazards. From the literature surveys it was concluded that the removal of heavy metal ions from the industrial waste water was important to decrease the environmental pollution and also diseases caused by the heavy metal ions. Graft copolymers were acts as most efficient adsorbent for the removal of heavy metal ions and most of these followed the pseudo first order and pseudo second order model of kinetics.

Research Progress in Removing Heavy Metals from Waste Water via Bio-Sorption

2014 ◽  
Vol 587-589 ◽  
pp. 692-695
Author(s):  
Wei Sun
Keyword(s):  
Waste Water ◽  
Heavy Metals ◽  
Heavy Metal ◽  
Water Treatment ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Waste Water Treatment ◽  
Research Progress ◽  
Traditional Methods ◽  
Sorption Method

Bio-absorption has an unparalleled advantage over other traditional methods in removing and recycling heavy metal ions from waste water. Consequently, it has a promising future. In this paper, the traditional methods and the bio-sorption method via which heavy metals are removed from waste water are compared to summarize the mechanism of bio-sorption, the types of bio-sorbent, the factors that can influence bio-sorption and the state of its application in waste water treatment .

The adsorption of divalent heavy metal ions on (8,0) carbon nanotubes: The first-principles study

2020 ◽  
Vol 34 (32) ◽  
pp. 2050368
Author(s):  
Z. Zhu ◽  
L. An ◽  
T. Chen ◽  
X. Jia
Keyword(s):  
Carbon Nanotubes ◽  
Heavy Metal ◽  
Metal Ions ◽  
First Principles ◽  
Industrial Wastewater ◽  
Heavy Metal Ions ◽  
Density Functional ◽  
Physical Adsorption ◽  
Functional Theory ◽  
Sensing Material

In order to explore new ways to detect and remove heavy metal ions from industrial wastewater, the first-principles method based on density functional theory has been used to investigate the performance of carbon nanotubes (CNTs) in adsorbing divalent heavy metal ions which include Zn[Formula: see text], Cu[Formula: see text], Pb[Formula: see text] and Sn[Formula: see text]. Results show that the adsorption of Zn[Formula: see text] on CNTs is weak and only physical adsorption forms between them. However, for Cu[Formula: see text], Pb[Formula: see text] and Sn[Formula: see text], the final adsorption distance with CNTs is greatly decreased, and the adsorption energy and charge transfer amount with CNTs are significantly increased. In addition, the charge density of Cu[Formula: see text], Pb[Formula: see text] and Sn[Formula: see text] overlaps effectively with that of CNTs. These indicate the formation of strong chemisorption between these ions and CNTs. Therefore, CNTs could be used as a sensing material to detect and remove Cu[Formula: see text], Pb[Formula: see text] and Sn[Formula: see text] from wastewater. The research provides theoretical guidance for the application of CNTs in heavy metal ions treatment.

scholarly journals Removal of Heavy Metal Ions from Waste Water by some Zeolite Tuffs

1978 ◽  
Vol 94 (1083) ◽  
pp. 341-346
Author(s):  
Yasuaki UEDA ◽  
Fumio NOGUCHI ◽  
Keisuke KAWANO ◽  
Koki OTA
Keyword(s):  
Waste Water ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions

Synthesis of graphene oxide/ polyvinyl alcohol (GO/PVA) composite film as an adsorbent

2021 ◽  
Vol 10 (3) ◽  
pp. xx-xx
Author(s):  
Thu Le Dieu ◽  
Hoang Tran Vinh
Keyword(s):  
Waste Water ◽  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Composite Film ◽  
Heavy Metal Ions ◽  
Precipitation Method ◽  
Initial Concentration ◽  
Ft Ir ◽  
Co Precipitation

In this study, heavy metal ions or organic in the aqueous solution are removed by adsorbent without filtration or centrifugation as well as incorporate magnetic materials into the adsorbent. A composite film GO/PVA from PVA and self – synthesized GO by co - precipitation method has synthesized successfully. This composite was characterized by XRD, SEM, FT-IR to evaluate the properties of this material. The results showed that there was an interaction between GO and PVA so we have tested the adsorption capacity of this composite with Co(II) ions and the obtained efficiency of this process was 99.5% with the initial concentration of solution is 20 mg.L-1. This film is completely capable of removing heavy metal ions from waste water.

Sign in / Sign up

Export Citation Format

Share Document