Mixed Manganese Dioxide on Magnetite Core MnO2@Fe3O4 as a Filler in a High-Performance Magnetic Alginate Membrane

The process of ethanol dehydration via pervaporation was performed using alginate membranes filled with manganese dioxide and a mixed filler consisting of manganese dioxide on magnetite core MnO2@Fe3O4 particles. The crystallization of manganese dioxide on magnetite nanoparticle surface resulted in a better dispersibility of this mixed filler in polymer matrix, with the preservation of the magnetic properties of magnetite. The prepared membranes were characterized by contact angle, degree of swelling and SEM microscopy measurements and correlated with their effectiveness in the pervaporative dehydration of ethanol. The results show a strong relation between filler properties and separation efficiency. The membranes filled with the mixed filler outperformed the membranes containing only neat oxide, exhibiting both higher flux and separation factor. The performance changed depending on filler content; thus, the presence of optimum filler loading was observed for the studied membranes. The best results were obtained for the alginate membrane filled with 7 wt.% of mixed filler MnO2@Fe3O4 particles. For this membrane, the separation factor and flux equalled to 483 and 1.22 kg·m−2·h−1, respectively.

Fabrication of Environmental-Friendly Magnetite Nanoparticle Surface Coatings for the Efficient Collection of Oil Spill

Over the past few decades, there has been an increased trend for the use of natural compounds and their derivatives as alternatives to traditional chemicals and is due to their renewability, green character, and wide availability. This work aims to convert sodium alginate (S.ALG), a natural polysaccharide, into amides through its conversion to alginic acid (H.ALG). The formed H.ALG was esterified using methanol, followed by a reaction with octadecylamine (OA) and dodecylamine (DA) to produce corresponding amides, OA-ALG, and DA-ALG, respectively. The synthesized OA-ALG and DA-ALG were used as capping agents to further form hydrophobic magnetite nanoparticles (MNPs), OA-MNPs and DA-MNPs, respectively. The chemical structures, morphology, hydrophobicity, and magnetic properties of OA-MNPs and DA-MNPs were investigated using different instrumental techniques. Furthermore, the efficacy of as-synthesized MNPs as oil spill collectors were also evaluated using different ratios of MNPs:crude oil. From the analysis of results, the OA-MNPs and DA-MNPs exhibited high efficiency in the collection of oil spill even at low ratios of MNPs:crude oil.

The Effect of Magnetite Nanoparticles on the Growth and Development of Nicotiana Tabacum Plants in Vivo and in Vitro Culture

Background. Nanomaterials are easily modified and have unique characteristics associated with a large reactive surface Due to these properties, nanomaterials are used in various branches of sciences and technology, such as pharmaceuticals, biotechnology, chemical technology, etc. Recently, the effect of magnetite nanoparticles on the morphological properties of plants has been actively studied for their further use as nanoadditives to increase yields and improve the properties of agricultural plants. Tobacco (Nicotiana tabacum) is a model object of plant biotechnology, it is used to study the effect of various factors on dicotyledonous plants, so it was chosen to study the effect of magnetite on the growth, development, and mass accumulation by plants. Objective. We are aimed to study the effect of magnetite nanoparticles on the growth and development of Nicotiana tabacum in vivo and in vitro. Methods. The ability of tobacco to produce biogenic magnetic nanoparticles by searching for mammal proteins homologues in theNicotiana tabacum proteome using the Blast NCBI program was studied using comparative genomics methods. The plants were divided into groups (control, magnetite nanoparticle concentration 0.1 mg/cm3, magnetite nanoparticle concentration 1 mg/cm3) for both in vivo and in vitro experiments. Analysis of plant parameters was performed every 14 days to study the dynamics of the effects of magnetite nanoparticles. Results. It was determined that magnetite nanoparticles at a concentration of 0.1 mg/cm3 in culture in vitro and in vivo significantly affect the growth of the root system and sprouts of Nicotiana tabacum. On the 56th day of plant cultivation in vitro on a salivary medium supplemented with magnetite nanoparticles at a concentration of 0.1 mg/cm3, an increase in the shoot length by 13.3%, root length by 31.7%, and the mass of absolutely dry substances by 18.75% was observed compared to the control. Treatment of magnetite nanoparticles with a suspension at a concentration of 0.1 mg/cm3 led to more pronounced results when growing tobacco in vivo. So, on the56th day, the root length increased by 23.3%, the length of the shoot – by 19.2%, and the mass of absolutely dry substances – by2 times, the first leaves appeared 2 days earlier compared to the control. The addition of magnetite nanoparticles to the substrate on which the plants were grown in vivo at a concentration of 1 mg/cm3 inhibits the growth of tobacco. Conclusions. Studies have shown the expediency of using magnetic nanoparticles at a concentration of 0.1 mg/cm3 as nanofertilizers in tobacco cultivation.

Stability Studies of Magnetite Nanoparticles in Environmental Solutions

In the presented paper, studies of magnetite nanoparticle stability in selected environmental solutions are reported. The durability tests were performed in four types of liquids: treated and untreated wastewater, river water, and commercial milk (0.5% fat). Nanoparticles before and after deposition in the testing conditions were measured by transmission electron microscopy, X-ray diffraction, infrared spectroscopy, and Mössbauer spectroscopy. The amount of Fe atoms transferred into the solutions was estimated on the basis of flame atomic absorption spectroscopy. The analysis of the obtained results shows good stability of the tested nanoparticles in all water solutions. They do not change their structure or magnetic properties significantly, which makes them a good candidate to be used as, for example, detectors of specific compounds or heavy metals. On the other hand, studies show that particles are stable in environmental conditions for a long period of time in an unchanged form, which can cause their accumulation; therefore, they may be hazardous to living organisms.