scholarly journals Electrical Properties Of The OLED With Convergence Relation By Surface Treatment Methods

2021 ◽  
Vol 12 (6) ◽  
pp. 730-736
Author(s):  
Ho Shik Lee Et.al
Keyword(s):  
Surface Treatment ◽  
Buffer Layer ◽  
Indium Tin Oxide ◽  
Chemical Treatment ◽  
Oxygen Vacancies ◽  
Carrier Injection ◽  
Organic Electroluminescent ◽  
Anode Electrode ◽  
The Relationship ◽  
Effect Of Surface

ITO (indium-tin-oxide) is used widely as the anode electrode in organic electroluminescence devices (OLEDs).  Several studies have dealt with the effect of ITO chemical treatment but to the OLEDs performance have not been considered the effect of this treatment. We were present here results regarding these effect.We studies of the effect of surface treatments on the properties of ITO substrate. We were performed chemical treatment with RCA and Aqua regiaof the OELDs. Since we will understand the properties of OELDs, we were performed Fowler-Nordheim tunneling. The buffer layer and ITO surface treatment were performed to increase the efficiency of the OLEDs. As a result, we were obtained conform the surface properties of ITO can be significantly changed by chemical treatment. The oxygen decrease produced by chemical treatment lead to increase of oxygen vacancies. We conformed that the oxygen vacancies role on increasing carrier injection. A study on the cause of improving the performance of the device using the surface treatment and the usingthe buffer layer will be of great help in understanding the relationship between the properties  of the ITO substrate and the organic electroluminescent device.

Injecting Inter-Layers and the Built-in Potential of Blue Polymer Light-Emitting Diodes

2000 ◽  
Vol 660 ◽  
Author(s):  
Thomas M. Brown ◽  
Ian S. Millard ◽  
David J. Lacey ◽  
Jeremy H. Burroughes ◽  
Richard H. Friend ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Light Emitting Diodes ◽  
Basic Structure ◽  
Thin Layers ◽  
Carrier Injection ◽  
Semiconducting Polymer ◽  
Light Emitting ◽  
Physical Mechanisms ◽  
Organic Solid ◽  
Polymer Light Emitting Diodes

ABSTRACTThe semiconducting-polymer/injecting-electrode heterojunction plays a crucial part in the operation of organic solid state devices. In polymer light-emitting diodes (LEDs), a common fundamental structure employed is Indium-Tin-Oxide/Polymer/Al. However, in order to fabricate efficient devices, alterations to this basic structure have to be carried out. The insertion of thin layers, between the electrodes and the emitting polymer, has been shown to greatly enhance LED performance, although the physical mechanisms underlying this effect remain unclear. Here, we use electro-absorption measurements of the built-in potential to monitor shifts in the barrier height at the electrode/polymer interface. We demonstrate that the main advantage brought about by inter-layers, such as poly(ethylenedioxythiophene)/poly(styrene sulphonic acid) (PEDOT:PSS) at the anode and Ca, LiF and CsF at the cathode, is a marked reduction of the barrier to carrier injection. The electro- absorption results also correlate with the electroluminescent characteristics of the LEDs.

Controlled Injection of Holes into ALQ3 Based Oleds by Means of An Oxidized Transport Layer

2001 ◽  
Vol 708 ◽  
Author(s):  
Mathew K. Mathai ◽  
Keith A. Higginson ◽  
Bing R. Hsieh ◽  
Fotios Papadimitrakopoulos
Keyword(s):  
Indium Tin Oxide ◽  
Oxidative Degradation ◽  
Transport Layer ◽  
Hole Injection ◽  
Carrier Injection ◽  
Salt Loading ◽  
Light Emitting ◽  
Hole Transporting ◽  
Intrinsic Degradation ◽  
Variable Conductivity

ABSTRACTIn this paper we report a method for tuning the extent of hole injection into the active light emitting tris- (8-hydroxyquinoline) aluminum (Alq3) layer in organic light emitting diodes (OLEDs). This is made possible by modifying the indium tin oxide (ITO) anode with an oxidized transport layer (OTL) comprising a hole transporting polycarbonate of N,N'-bis(3-hydroxymethyl)-N,N'-bis(phenyl) benzidine and diethylene glycol (PC-TPB-DEG) doped with varying concentrations of antimonium hexafluoride salt of N,N,N',N'-tetra-p-tolyl-4,4'-biphenyldiamine (TMTPD+ SbF6-). The conductivity of the OTL can be changed over three orders of magnitude depending on salt loading. The analysis of hole and electron current variations in these devices indicates that optimizing the conductivity of the OTL enables the modulation of hole injection into the Alq3 layer. The bipolar charge transport properties for OLEDs in which the interfacial carrier injection barriers have been minimized, are governed by the conductivities of the respective layers and in this case it is shown that the variable conductivity of the OTL does allow for better control of the same. Accordingly, varying the concentration of holes in the device indicates that beyond an optimum concentration of holes, further hole injection results in the formation of light quenching cationic species and the initiation of oxidative degradation processes in the Alq3 layer, thus accelerating the intrinsic degradation of these devices. The variable conductivity of the OTL can hence be used to minimize the occurrence of these processes.

scholarly journals Effect of surface treatments on push-out bond strength of calcium silicate-based cements to fiber posts

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Amr M. Elnaghy ◽  
Ayman Mandorah ◽  
Ali H. Hassan ◽  
Alaa Elshazli ◽  
Shaymaa Elsaka
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Glass Fiber ◽  
Calcium Silicate ◽  
Surface Treatments ◽  
The Other ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out ◽  
Effect Of Surface

Abstract Background To evaluate the effect of surface treatments on the push-out bond strength of Biodentine (BD) and white mineral trioxide aggregate (WMTA) to fiber posts. Methods Two brands of fiber posts were used: Reblida post; RP and RelyX post; RX. Each type of post (n = 80/group) was divided into four groups (n = 20/group) and exposed to surface treatment as follows: Control (no treatment), sandblasting (SB), hydrofluoric acid (HF), and TiF4 4 wt/v%. Each group was further subdivided into two subgroups (n = 10/subgroup) based on the type of CSCs used as follows: Subgroup A: BD and Subgroup B: WMTA. Push-out bond strength of BD and WMTA to glass fiber posts was assessed. Data were statistically analyzed using three-way ANOVA and Tukey’s test. A Weibull analysis was performed on the push-out bond strength data. Results BD showed higher bond strength than WMTA (P < 0.001). The push-out bond strength for posts treated with TiF4 4 wt/v% showed greater bond strength than the other surface treatments (P < 0.05). The BD/RP-TiF4 4 wt/v% showed the greater characteristic bond strength (σ0) (15.93) compared with the other groups. Surface treatments modified the surface topography of glass fiber posts. Conclusions The BD/RP-TiF4 4 wt/v% showed greater bond strength compared with the other groups. The TiF4 4 wt/v% surface treatment enhanced the bond strength of BD and WMTA to glass fiber posts than the other treatments. Surface treatment of fiber post with TiF4 4 wt/v% could be used to improve the bond strength with calcium silicate-based cements.

Sign in / Sign up

Export Citation Format

Share Document