Electrostatic Charging of Fumed Silica Particles: Effect of Surface Treatment with Fluoroalkylsilanes

2013 ◽  
Author(s):  
Jinsong Liu
Keyword(s):  
Surface Treatment ◽  
Fumed Silica ◽  
Silica Particles ◽  
Electrostatic Charging ◽  
Effect Of Surface

Mechanical Property Improvement of Poly(Butylene Succinate) by Reinforcing with Modified Fumed Silica

2014 ◽  
Vol 1025-1026 ◽  
pp. 215-220 ◽  
Author(s):  
Sasirada Weerasunthorn ◽  
Pranut Potiyaraj
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Fumed Silica ◽  
Tensile Modulus ◽  
Silica Particles ◽  
Melt Mixing ◽  
Butylene Succinate ◽  
Ir Spectrophotometry

Fumed silica particles (SiO2) were directly added into poly (butylene succinate) (PBS) by melt mixing process. The effects of amount of fumed silica particles on mechanical properties of PBS/fumed silica composites, those are tensile strength, tensile modulus, impact strength as well as flexural strength, were investigated. It was found that the mechanical properties decreased with increasing fumed silica loading (0-3 wt%). In order to increase polymer-filler interaction, fumed silica was treated with 3-glycidyloxypropyl trimethoxysilane (GPMS), and its structure was analyzed by FT-IR spectrophotometry. The PBS/modified was found to possess better tensile strength, tensile modulus, impact strength and flexural strength that those of PBS/fumed silica composites.

scholarly journals Effect of surface treatments on push-out bond strength of calcium silicate-based cements to fiber posts

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Amr M. Elnaghy ◽  
Ayman Mandorah ◽  
Ali H. Hassan ◽  
Alaa Elshazli ◽  
Shaymaa Elsaka
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Glass Fiber ◽  
Calcium Silicate ◽  
Surface Treatments ◽  
The Other ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out ◽  
Effect Of Surface

Abstract Background To evaluate the effect of surface treatments on the push-out bond strength of Biodentine (BD) and white mineral trioxide aggregate (WMTA) to fiber posts. Methods Two brands of fiber posts were used: Reblida post; RP and RelyX post; RX. Each type of post (n = 80/group) was divided into four groups (n = 20/group) and exposed to surface treatment as follows: Control (no treatment), sandblasting (SB), hydrofluoric acid (HF), and TiF4 4 wt/v%. Each group was further subdivided into two subgroups (n = 10/subgroup) based on the type of CSCs used as follows: Subgroup A: BD and Subgroup B: WMTA. Push-out bond strength of BD and WMTA to glass fiber posts was assessed. Data were statistically analyzed using three-way ANOVA and Tukey’s test. A Weibull analysis was performed on the push-out bond strength data. Results BD showed higher bond strength than WMTA (P < 0.001). The push-out bond strength for posts treated with TiF4 4 wt/v% showed greater bond strength than the other surface treatments (P < 0.05). The BD/RP-TiF4 4 wt/v% showed the greater characteristic bond strength (σ0) (15.93) compared with the other groups. Surface treatments modified the surface topography of glass fiber posts. Conclusions The BD/RP-TiF4 4 wt/v% showed greater bond strength compared with the other groups. The TiF4 4 wt/v% surface treatment enhanced the bond strength of BD and WMTA to glass fiber posts than the other treatments. Surface treatment of fiber post with TiF4 4 wt/v% could be used to improve the bond strength with calcium silicate-based cements.

Performance of Polishing Slurries containing Silica Particles grown by Sol-Gel Method

2000 ◽  
Vol 613 ◽  
Author(s):  
Sun Hyuk Bae ◽  
Jae-Hyun So ◽  
Seung-Man Yang ◽  
Do Hyun Kim
Keyword(s):  
Fumed Silica ◽  
Sol Gel ◽  
Particle Growth ◽  
Silica Particles ◽  
Gel Method ◽  
Sol Gel Method ◽  
Irregular Shapes ◽  
Wafer Polishing ◽  
Transmission Electron ◽  
Silica Slurry

ABSTRACTSilica slurry used as abrasives in wafer polishing process is made by dispersing silica particles in an alkali solution. Since commercially available colloidal or fumed silica particles need some modifications to be directly used as abrasive slurry due to their small sizes, irregular shapes or broad size distribution, we have prepared silica abrasives by particle growth of fumed silica or colloidal silica as seeds by sol-gel method. Silica slurries prepared by this step-wise growth from commercial seeds were tested using one-armed polisher for the comparison with commercial slurries and showed the performance comparable to commercial slurries. Microstructures of polishing slurries were investigated using transmission electron microscopy and ARES rheometer. From the result, stability of the slurry was found to be more important than the primary particle sizes for the polishing performance.

scholarly journals Repair bond strength of composite: Effect of surface treatment and type of composite

2018 ◽  
pp. 0-0
Author(s):  
M Ghavam ◽  
M Naeemi ◽  
SS Hashemikamangar ◽  
H Ebrahimi ◽  
MJ Kharazifard
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Composite Effect ◽  
Effect Of Surface
Sign in / Sign up

Export Citation Format

Share Document