scholarly journals 3D bioprinting of stem cells and polymer/bioactive glass composite scaffolds for tissue engineering

2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Caroline Murphy ◽  
Krishna Kolan ◽  
Wenbin Li ◽  
Julie Semon ◽  
Delbert Day ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bioactive Glass ◽  
Borate Glass ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Glass Composite ◽  
Dynamic Interactions ◽  
Synthetic Scaffolds

 A major limitation of using synthetic scaffolds in tissue engineering applications is insufficient angiogenesis in scaffold interior. Bioactive borate glasses have been shown to promote angiogenesis. There is a need to investigate the biofabrication of polymer composites by incorporating borate glass to increase the angiogenic capacity of the fabricated scaffolds. In this study, we investigated the bioprinting of human adipose stem cells (ASCs) with a polycaprolactone (PCL)/bioactive borate glass composite. Borate glass at the concentration of 10 to 50 weight %, was added to a mixture of PCL and organic solvent to make an extrudable paste. ASCs suspended in Matrigel were ejected as droplets using a second syringe. Scaffolds measuring 10x10x1 mm3 in overall dimensions with pore sizes ranging from 100 – 300 µm were fabricated. Degradation of the scaffolds in cell culture medium showed a controlled release of bioactive glass for up to two weeks. The viability of ASCs printed on the scaffold was investigated during the same time period. This 3D bioprinting method shows a high potential to create a bioactive, highly angiogenic three-dimensional environment required for complex and dynamic interactions that govern the cell’s behavior in vivo.

scholarly journals Bioprinting with human stem cells-laden alginate-gelatin bioink and bioactive glass for tissue engineering

2019 ◽  
Vol 5 (2.2) ◽  
pp. 3 ◽  
Author(s):  
Krishna C. R. Kolan ◽  
Julie A. Semon ◽  
Bradley Bromet ◽  
Delbert E. Day ◽  
Ming C. Leu
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bioactive Glass ◽  
Three Dimensional ◽  
Cell Types ◽  
3D Models ◽  
Culture Conditions ◽  
3D Bioprinting ◽  
Human Stem Cells ◽  
Tissue Repair And Regeneration

Three-dimensional (3D) bioprinting technologies have shown great potential in the fabrication of 3D models for different human tissues. Stem cells are an attractive cell source in tissue engineering as they can be directed by material and environmental cues to differentiate into multiple cell types for tissue repair and regeneration. In this study, we investigate the viability of human adipose-derived mesenchymal stem cells (ASCs) in alginate-gelatin (Alg-Gel) hydrogel bioprinted with or without bioactive glass. Highly angiogenic borate bioactive glass (13-93B3) in 50 wt% is added to polycaprolactone (PCL) to fabricate scaffolds using a solvent-based extrusion 3D bioprinting technique. The fabricated scaffolds with 12 × 12 × 1 mm3 in overall dimensions are physically characterized, and the glass dissolution from PCL/glass composite over a period of 28 days is studied. Alg-Gel composite hydrogel is used as a bioink to suspend ASCs, and scaffolds are then bioprinted in different configurations: Bioink only, PCL+bioink, and PCL/glass+bioink, to investigate ASC viability. The results indicate the feasibility of the solvent-based bioprinting process to fabricate 3D cellularized scaffolds with more than 80% viability on day 0. The decrease in viability after 7 days due to glass concentration and static culture conditions is discussed. The feasibility of modifying Alg-Gel with 13-93B3 glass for bioprinting is also investigated, and the results are discussed.

scholarly journals Of balls, inks and cages: Hybrid biofabrication of 3D tissue analogs

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Nicanor Moldovan ◽  
Leni Maldovan ◽  
Michael Raghunath
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Hybrid Approach ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Support Structures ◽  
Cell Clusters ◽  
3D Space ◽  
Technical Solutions

The overarching principle of three-dimensional (3D) bioprinting is the placing of cells or cell clusters in the 3D space to generate a cohesive tissue microarchitecture that comes close to in vivo characteristics. To achieve this goal, several technical solutions are available, generating considerable combinatorial bandwidth: (i) Support structures are generated first, and cells are seeded subsequently; (ii) alternatively, cells are delivered in a printing medium, so-called “bioink,” that contains them during the printing process and ensures shape fidelity of the generated structure; and (iii) a “scaffold-free” version of bioprinting, where only cells are used and the extracellular matrix is produced by the cells themselves, also recently entered a phase of accelerated development and successful applications. However, the scaffold-free approaches may still benefit from secondary incorporation of scaffolding materials, thus expanding their versatility. Reversibly, the bioink-based bioprinting could also be improved by adopting some of the principles and practices of scaffold-free biofabrication. Collectively, we anticipate that combinations of these complementary methods in a “hybrid” approach, rather than their development in separate technological niches, will largely increase their efficiency and applicability in tissue engineering.

scholarly journals Stem cells in tissue engineering – dynamic cultivation requirement

2018 ◽  
Vol 65 (1) ◽  
pp. 37-44
Author(s):  
Dijana Trišić ◽  
Vukoman Jokanović ◽  
Đorđe Antonijević ◽  
Dejan Marković
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Three Dimensional ◽  
Future Research ◽  
Porous Scaffolds ◽  
High Quality ◽  
Culture Techniques ◽  
Dynamic Cultivation

Summary Stem cells have shown great potential for in vitro tissue engineering, regenerative medicine, cell therapy and pharmaceutical applications. All these applications, especially in clinical trials, will require guided production of high-quality cells. Traditional culture techniques and applications have been performed for the majority of primary and established cell lines and standardized for various analyses. Still, these culture conditions are unable to mimic dynamic and specialized three-dimensional microenvironment of the stem cells’ niche from in vivo conditions. In an attempt to provide biomimetic microenvironments for stem cells in vitro growth, three-dimensional culture techniques have been developed. In our study advantages of newly developed porous scaffolds as the most promising in vitro imitation of niche that provides physical support, enables cell growth, regeneration and neovascularization, while they are replaced in time with newly created tissue was explained. Furthermore, dynamic cultivation techniques have been described, as new way of cell culturing that will be the main subject of our future research. In that manner, by developing an optimal dynamic culturing method, high-quality new cells and tissues would be possible to obtain, for any future clinical application.

scholarly journals Cartilage Differentiation of Bone Marrow-Derived Mesenchymal Stem Cells in Three-Dimensional Silica Nonwoven Fabrics

2018 ◽  
Vol 8 (8) ◽  
pp. 1398 ◽  
Author(s):  
Shohei Ishikawa ◽  
Kazutoshi Iijima ◽  
Kohei Sasaki ◽  
Mineo Hashizume ◽  
Masaaki Kawabe ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bone Marrow ◽  
Chondrogenic Differentiation ◽  
Cartilage Tissue Engineering ◽  
Three Dimensional ◽  
Cartilage Tissue ◽  
Nonwoven Fabrics

In cartilage tissue engineering, three-dimensional (3D) scaffolds provide native extracellular matrix (ECM) environments that induce tissue ingrowth and ECM deposition for in vitro and in vivo tissue regeneration. In this report, we investigated 3D silica nonwoven fabrics (Cellbed®) as a scaffold for mesenchymal stem cells (MSCs) in cartilage tissue engineering applications. The unique, highly porous microstructure of 3D silica fabrics allows for immediate cell infiltration for tissue repair and orientation of cell–cell interaction. It is expected that the morphological similarity of silica fibers to that of fibrillar ECM contributes to the functionalization of cells. Human bone marrow-derived MSCs were cultured in 3D silica fabrics, and chondrogenic differentiation was induced by culture in chondrogenic differentiation medium. The characteristics of chondrogenic differentiation including cellular growth, ECM deposition of glycosaminoglycan and collagen, and gene expression were evaluated. Because of the highly interconnected network structure, stiffness, and permeability of the 3D silica fabrics, the level of chondrogenesis observed in MSCs seeded within was comparable to that observed in MSCs maintained on atelocollagen gels, which are widely used to study the chondrogenesis of MSCs in vitro and in vivo. These results indicated that 3D silica nonwoven fabrics are a promising scaffold for the regeneration of articular cartilage defects using MSCs, showing the particular importance of high elasticity.

scholarly journals 3D Bioprinting of Vascularized Tissues for in vitro and in vivo Applications

2021 ◽  
Vol 9 ◽  
Author(s):  
Earnest P. Chen ◽  
Zeren Toksoy ◽  
Bruce A. Davis ◽  
John P. Geibel
Keyword(s):  
Tissue Engineering ◽  
Drug Testing ◽  
Rapid Development ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Vascular Networks ◽  
Main Challenge ◽  
3D Printed

With a limited supply of organ donors and available organs for transplantation, the aim of tissue engineering with three-dimensional (3D) bioprinting technology is to construct fully functional and viable tissue and organ replacements for various clinical applications. 3D bioprinting allows for the customization of complex tissue architecture with numerous combinations of materials and printing methods to build different tissue types, and eventually fully functional replacement organs. The main challenge of maintaining 3D printed tissue viability is the inclusion of complex vascular networks for nutrient transport and waste disposal. Rapid development and discoveries in recent years have taken huge strides toward perfecting the incorporation of vascular networks in 3D printed tissue and organs. In this review, we will discuss the latest advancements in fabricating vascularized tissue and organs including novel strategies and materials, and their applications. Our discussion will begin with the exploration of printing vasculature, progress through the current statuses of bioprinting tissue/organoids from bone to muscles to organs, and conclude with relevant applications for in vitro models and drug testing. We will also explore and discuss the current limitations of vascularized tissue engineering and some of the promising future directions this technology may bring.

scholarly journals Adipose-Derived Stem Cells for Tissue Engineering and Regenerative Medicine Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-19 ◽  
Author(s):  
Ru Dai ◽  
Zongjie Wang ◽  
Roya Samanipour ◽  
Kyo-in Koo ◽  
Keekyoung Kim
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Regenerative Medicine ◽  
Three Dimensional ◽  
Adipose Derived Stem Cells ◽  
Tissue Engineering Scaffolds ◽  
Stem Cell Source ◽  
Proliferation And Differentiation ◽  
Mesenchymal Stem Cell Source

Adipose-derived stem cells (ASCs) are a mesenchymal stem cell source with properties of self-renewal and multipotential differentiation. Compared to bone marrow-derived stem cells (BMSCs), ASCs can be derived from more sources and are harvested more easily. Three-dimensional (3D) tissue engineering scaffolds are better able to mimic thein vivocellular microenvironment, which benefits the localization, attachment, proliferation, and differentiation of ASCs. Therefore, tissue-engineered ASCs are recognized as an attractive substitute for tissue and organ transplantation. In this paper, we review the characteristics of ASCs, as well as the biomaterials and tissue engineering methods used to proliferate and differentiate ASCs in a 3D environment. Clinical applications of tissue-engineered ASCs are also discussed to reveal the potential and feasibility of using tissue-engineered ASCs in regenerative medicine.

In vitro Three Dimensional Scaffold-free Construct of Human Adipose-derived Stem Cells in Coculture with Endothelial Cells and Fibroblasts

2017 ◽  
Vol 68 (6) ◽  
pp. 1341-1344
Author(s):  
Grigore Berea ◽  
Gheorghe Gh. Balan ◽  
Vasile Sandru ◽  
Paul Dan Sirbu
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Endothelial Cells ◽  
Single Cell ◽  
Cell Line ◽  
Bone Repair ◽  
Umbilical Vein ◽  
Human Fibroblasts ◽  
Three Dimensional ◽  
Adipose Derived Stem Cells

Complex interactions between stem cells, vascular cells and fibroblasts represent the substrate of building microenvironment-embedded 3D structures that can be grafted or added to bone substitute scaffolds in tissue engineering or clinical bone repair. Human Adipose-derived Stem Cells (hASCs), human umbilical vein endothelial cells (HUVECs) and normal dermal human fibroblasts (NDHF) can be mixed together in three dimensional scaffold free constructs and their behaviour will emphasize their potential use as seeding points in bone tissue engineering. Various combinations of the aforementioned cell lines were compared to single cell line culture in terms of size, viability and cell proliferation. At 5 weeks, viability dropped for single cell line spheroids while addition of NDHF to hASC maintained the viability at the same level at 5 weeks Fibroblasts addition to the 3D construct of stem cells and endothelial cells improves viability and reduces proliferation as a marker of cell differentiation toward osteogenic line.

Sign in / Sign up

Export Citation Format

Share Document