scholarly journals The Lockdown and Smart Working Effects on Electric Energy Consumption: The Analysis for a Group of Employees

2021 ◽  
Vol 65 (2-4) ◽  
pp. 292-299
Author(s):  
Samuele Branchetti ◽  
Carlo Petrovich ◽  
Giuseppe Nigliaccio ◽  
Fabrizio Paolucci
Keyword(s):  
Electric Energy ◽  
Office Building ◽  
Electric Load ◽  
Photovoltaic Panels ◽  
Electric Energy Consumption ◽  
Italian Government ◽  
Self Sufficiency ◽  
Smart Working ◽  
And Shifts ◽  
Office Equipment

The COVID-19 pandemic has accelerated the use of smart working: the working activity carried out also outside the office and not only at the office. This has interesting consequences also on the energy sector, since it can decrease commuting consumption and shifts electric consumption from the tertiary to domestic sector. In this work the electric consumption performance of a (representative) group of 10 employees, working with classical office equipment, has been investigated. The variation of the electric load curves has been analyzed in the office and at home before, during and after the 2020 lockdown restrictions introduced by the Italian government. Consumption changes, with respect to the previous year, have been analyzed and discussed. The variations of the electric load curves affect, in case of adoption of PV (photovoltaic) panels, PV self-sufficiency and PV self-consumption. In the case considered, while the former does not vary significantly (with values of about 40-50%), the latter decreases, in case of the office building, from 44% to 24% and it increases, in case of households, from 32% to 50%. These consequences have to be taken into account when programming new PV plant installations.

Analysis of Electric Energy Consumption Patterns: A Case Study of a Real Life Office Building

2013 ◽  
Vol 330 ◽  
pp. 158-162 ◽  
Author(s):  
Jin Soo Han ◽  
Youn Kwae Jeong ◽  
Il Woo Lee
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Real Life ◽  
Electric Energy ◽  
Consumption Patterns ◽  
Office Building ◽  
Commercial Building ◽  
Total Energy Consumption ◽  
Electric Energy Consumption ◽  
Energy Consumption Patterns

Electric energy consumption shares a great portion of commercial building energy. Electric energy saving is essential to reduce total energy consumption in commercial buildings. To draw energy saving methods, it is necessary to monitor real energy consumption patterns and analyze the results. We monitor the lighting and non-lighting energy consumption of eleven zones in a real working office building every fifteen minutes during eleven months. We observe and analyze the monthly and daily energy consumption patterns of all zones and draw several feasible energy saving methods. Moreover, the lighting and occupancy are monitored simultaneously in detail to investigate the unnecessary energy consumption. It shows the possibility of a great amount of energy saving. Because we analyze the energy consumption patterns in all zones, the drawn energy saving methods are applicable to the current building with some added infrastructure and expandable to other similar office buildings. Our result is expected to contribute to reducing the energy consumption in buildings.

scholarly journals Solving the Cold-Start Problem in Short-Term Load Forecasting Using Tree-Based Methods

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 886 ◽  
Author(s):  
Jihoon Moon ◽  
Junhong Kim ◽  
Pilsung Kang ◽  
Eenjun Hwang
Keyword(s):  
Random Forest ◽  
Energy Management ◽  
Load Forecasting ◽  
Electric Energy ◽  
Accurate Prediction ◽  
Electric Load ◽  
Test Set ◽  
Electric Energy Consumption ◽  
Consumption Data ◽  
Input Variables

An energy-management system requires accurate prediction of the electric load for optimal energy management. However, if the amount of electric load data is insufficient, it is challenging to perform an accurate prediction. To address this issue, we propose a novel electric load forecasting scheme using the electric load data of diverse buildings. We first divide the electric energy consumption data into training and test sets. Then, we construct multivariate random forest (MRF)-based forecasting models according to each building except the target building in the training set and a random forest (RF)-based forecasting model using the limited electric load data of the target building in the test set. In the test set, we compare the electric load of the target building with that of other buildings to select the MRF model that is the most similar to the target building. Then, we predict the electric load of the target building using its input variables via the selected MRF model. We combine the MRF and RF models by considering the different electric load patterns on weekdays and holidays. Experimental results demonstrate that combining the two models can achieve satisfactory prediction performance even if the electric data of only one day are available for the target building.

Measurements of electric energy consumption in a low energy building in Slovak climatic conditions

2012 ◽  
Vol 7 (3) ◽  
pp. 23-32 ◽  
Author(s):  
Miloslav Bagoňa ◽  
Dušan Katunský ◽  
Martin Lopušniak ◽  
Marián Vertaľ
Keyword(s):  
Energy Consumption ◽  
Electric Energy ◽  
Climatic Conditions ◽  
Low Energy ◽  
Electric Energy Consumption

scholarly journals Traffic Light Priority for Trams in Warsaw as a Tool for Transport Policy and Reduction of Energy Consumption

2021 ◽  
Vol 13 (8) ◽  
pp. 4180
Author(s):  
Andrzej Czerepicki ◽  
Tomasz Krukowicz ◽  
Anna Górka ◽  
Jarosław Szustek
Keyword(s):  
Control System ◽  
Energy Consumption ◽  
Electric Energy ◽  
Fixed Time ◽  
Pollutant Emissions ◽  
Computer Simulation Model ◽  
Traffic Light ◽  
Electric Energy Consumption ◽  
Time Control ◽  
Reduction Of Energy Consumption

The article presents an analysis of priority solutions for trams at a selected sequence of intersections in Warsaw (Poland). An analysis of the literature has shown the topicality of this issue. A computer simulation model of a coordinated sequence of intersections was constructed. Three test scenarios were designed: the existing control system, the new coordinated fixed-time control system, and the adaptive control system with active priority. In the simulation process, detailed travel characteristics of trams and other traffic participants in a selected section were obtained for the three varying scenarios. Electric energy consumption for traction needs and pollutant emissions was then estimated for each of the variants. It was concluded that for the analyzed configuration, implementation of the adaptive priority will result in a reduction of tram time losses by up to 25%, a reduction in energy consumption by up to 23%, and a reduction in the emission of pollutants from individual vehicles by up to 3% in relation to the original variant. The conducted research may be the basis for a comprehensive method of assessing the effectiveness of applying the adaptative priority when designing new tramway lines and modernizing the existing ones.

scholarly journals AUDIT ENERGI PADA SEBUAH HOTEL

2012 ◽  
Vol 16 (3) ◽  
pp. 131
Author(s):  
Didik Ariwibowo
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Energy Savings ◽  
Electric Energy ◽  
Electrical Energy ◽  
Hot Water ◽  
Electrical Energy Consumption ◽  
Energy Audit ◽  
Electric Energy Consumption ◽  
Pumping System

Didik Ariwibowo, in this paper explain that energy audit activities conducted through several phases, namely: the initial audit, detailed audit, analysis of energy savings opportunities, and the proposed energy savings. Total energy consumed consists of electrical energy, fuel, and materials in this case is water. Electrical energy consumption data obtained from payment of electricity accounts for a year while consumption of fuel and water obtained from the payment of material procurement. From the calculation data, IKE hotels accounted for 420.867 kWh/m2.tahun, while the IKE standards for the hotel is 300 kWh/m2.tahun. Thus, IKE hotel included categorized wasteful in energy usage. The largest energy consumption on electric energy consumption. Largest electric energy consumption is on the air conditioning (AC-air conditioning) that is equal to 71.3%, and lighting and electrical equipment at 27.28%, and hot water supply system by 4.44%. Electrical energy consumption in AC looks very big. Ministry of Energy and Mineral Resources of the statutes, the profile of energy use by air conditioning at the hotel by 48.5%. With these considerations in the AC target for audit detail as the next phase of activity. The results of a detailed audit analysis to find an air conditioning system energy savings opportunities in pumping systems. Recommendations on these savings is the integration of automation on the pumping system and fan coil units (FCU). The principle of energy conservation in the pumping system is by installing variable speed drives (VSD) pump drive motor to adjust speed according to load on the FCU. Load variations FCU provide input on the VSD pumps to match. Adaptation is predicted pump can save electricity consumption up to 65.7%. Keywords: energy audit, IKE, AC

Research on Jobshop Scheduling Problem with Energy Consumption

2011 ◽  
Vol 314-316 ◽  
pp. 2071-2075
Author(s):  
Jia Hai Wang ◽  
Wen Tao Gong
Keyword(s):  
Mathematical Model ◽  
Energy Consumption ◽  
Processing Time ◽  
Electric Energy ◽  
Low Carbon ◽  
Load Shifting ◽  
Electric Energy Consumption ◽  
Jobshop Scheduling ◽  
Time Division ◽  
The Mathematical Model

Discrete machine manufacture enterprises have to induce new low-carbon manufacturing model in order to solve a dilemma of mutual restraint between development and electric energy consumption. The paper presents an approach to solve JSP with the objective of minimizing the energy consumption by shortening the distance between electricity peak and valley according to theory of load shifting in electricity. The mathematical model is proposed for JSP with objective of minimizing the energy consumption and processing time of entire batch, then the idea of time division is introduced, and a solving method based on GA built-in eM-Plant is employed to verify the model and get satisfactory scheduling results.Discrete machine manufacture enterprises have to induce new low-carbon manufacturing model in order to solve a dilemma of mutual restraint between development and electric energy consumption. The paper presents an approach to solve JSP with the objective of minimizing the energy consumption by shortening the distance between electricity peak and valley according to theory of load shifting in electricity. The mathematical model is proposed for JSP with objective of minimizing the energy consumption and processing time of entire batch, then the idea of time division is introduced, and a solving method based on GA built-in eM-Plant is employed to verify the model and get satisfactory scheduling results.

Sign in / Sign up

Export Citation Format

Share Document