scholarly journals Mathematical Model to Predict the Affinity Between Aggregate/Bitumen

2020 ◽  
Vol 22 (3) ◽  
pp. 197
Author(s):  
P. Caputo ◽  
G.A. Ranieri ◽  
D. Miriello ◽  
A. Bloise ◽  
A.A. Abe ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Contact Angle ◽  
Chemical Composition ◽  
Bond Angle ◽  
Angle Measurements ◽  
Significant Difference ◽  
Road Surfaces ◽  
Contact Angle Measurements ◽  
Established Fact ◽  
The Mathematical Model

The stones used for the construction of road surfaces have a complex mineralogical and hence chemical composition. They are made up of several types of minerals put together. This generates a significant difference in adhesion with the bituminous binder. The aim of this study is to create a mathematical model able to predict the adhesion between bitumen and stone on the basis of contact angle measurements made on different pure minerals. The mathematical model used was developed keeping in mind the exponential bond that the minerals have with the corresponding bond angle. This model also confirmed the established fact that the lower the value of Δ, the better the adhesion between the bitumen and the aggregate.

scholarly journals Assessment of Wettability and Contact Angle of Bonding Agent with Enamel Surface Etched by Five Commercially Available Etchants: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Deepika Katyal ◽  
Aravind Kumar Subramanian ◽  
Adith Venugopal ◽  
Anand Marya
Keyword(s):  
Contact Angle ◽  
Statistical Analysis ◽  
In Vitro Study ◽  
Enamel Surface ◽  
Bonding Agent ◽  
Etch Pattern ◽  
Angle Measurements ◽  
Significant Difference ◽  
Contact Angle Measurements

Background. The quantity and quality of the etching pattern produced by acids play a significant role in the wettability and contact angle of the adhesive with the enamel surface in orthodontics. The better the etch pattern, the more the surface energy of the enamel, better the penetration of the adhesive, which ultimately results in better bond strength. The present study aimed to evaluate the contact angle of the bonding agent with the enamel surface etched by five commercially available etchants and check if any difference existed between the five. Materials and Methods. Twenty-five human maxillary and mandibular central incisors and premolars extracted for orthodontic or dental purposes were used in this study as samples. The teeth were allocated into five groups based upon the etchant used to etch the enamel surface. After the samples were etched, a hard tissue microtome was used to create thin slices of the enamel surface. The samples were then exposed to bonding agent Ormco Enlight. The bonding agent was released in the form of droplets onto the enamel slices mounted on a contact angle goniometer. The contact angle values were tabulated, and statistical analysis using the one-way ANOVA test was carried out. Results. The contact angle measurements of the etchant group, DPI, were the lowest, while D-tech has the highest contact angle values. However, statistical analysis revealed no statistically significant difference between the contact angle measurements of the five groups included in the study. Conclusion. No statistically significant difference existed between the five etchant groups included in the study. However, commercially available etchant DPI showed lesser contact angle and thus better wettability in comparison to other groups. Further elemental analysis and surface analysis are required to validate these results.

Wettability Determination by Equilibrium Contact Angle Measurements: Reservoir Rock- Connate Water System With Injection of CO2

2012 ◽  
Author(s):  
Narjes Shojaikaveh ◽  
Cas Berentsen ◽  
Susanne Eva Johanne Rudolph-Floter ◽  
Karl Heinz Wolf ◽  
William Richard Rossen
Keyword(s):  
Contact Angle ◽  
Water System ◽  
Reservoir Rock ◽  
Equilibrium Contact Angle ◽  
Connate Water ◽  
Angle Measurements ◽  
Contact Angle Measurements

Surface Wettability Enhances Osteoblast Adhesion on Silicon-Substituted Hydroxyapatite Thin Films

2007 ◽  
Vol 330-332 ◽  
pp. 877-880 ◽  
Author(s):  
E.S. Thian ◽  
J. Huang ◽  
Serena Best ◽  
Zoe H. Barber ◽  
William Bonfield
Keyword(s):  
Thin Films ◽  
Contact Angle ◽  
Actin Filaments ◽  
Culture Study ◽  
Cell Culture Study ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Osteoblast Adhesion ◽  
Lower Contact

Crystalline hydroxyapatite (HA) and 0.8 wt.% silicon-substituted HA (SiHA) thin films were produced using magnetron co-sputtering. These films were subjected to contact angle measurements and in vitro cell culture study using human osteoblast-like (HOB) cells. A wettability study showed that SiHA has a lower contact angle, and thus is more hydrophilic in nature, as compared to HA. Consequently, enhanced cell growth was observed on SiHA at all time-points. Furthermore, distinct and well-developed actin filaments could be seen within HOB cells on SiHA. Thus, this work demonstrated that the surface properties of the coating may be modified by the substitution of Si into the HA structure.

Characterization of plasma-treated poly (hydroxybutyrate) membrane surfaces by ESCA and contact angle measurements

1992 ◽  
Vol 73 (2-3) ◽  
pp. 163-172 ◽  
Author(s):  
Dietmar Flösch ◽  
Giorgio Clarotti ◽  
Kurt E. Geckeler ◽  
François Schué ◽  
Wolfgang Göpel
Keyword(s):  
Contact Angle ◽  
Membrane Surfaces ◽  
Angle Measurements ◽  
Contact Angle Measurements
Sign in / Sign up

Export Citation Format

Share Document