scholarly journals A Comparative Study of Alkali-Activated Fly Ashes under Heat-Exposure

◽  
2016 ◽  
Author(s):  
Sepehr Seyedian Choubi ◽  
◽  
Cagla Meral ◽  
Yiğit Semih Akbas ◽  
Meltem Tangüler Bayramtan ◽  
...  
Keyword(s):  
Comparative Study ◽  
Heat Exposure ◽  
Fly Ashes ◽  
Alkali Activated

Influence of Different Mineral Precursors on the Properties of Fly Ash Based Alkali-Activated Mortars

2018 ◽  
Vol 761 ◽  
pp. 73-78 ◽  
Author(s):  
Matej Špak ◽  
Pavel Raschman
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Chemical Composition ◽  
Coal Combustion ◽  
Pure Aluminum ◽  
Partial Replacement ◽  
Black Coal ◽  
Fly Ashes ◽  
Final Composition ◽  
Alkali Activated

Alkali-activated materials based on fly ash are widely developed and also produced on the present. Some of fly ashes are not suitable for production of alkali-activated materials because of their inconvenient chemical composition. Alumina-silicates are the most important components that are needed to accomplish the successful reaction. The proper content of amorphous phase of alumina-silicates and its proportion as well should be provided for the final composition of alkali-activated materials. The influence of pure aluminum oxide powder as well as raw milled natural perlite on mechanical properties and durability of alkali-activated mortars was investigated. These minerals were used as partial replacement of fly ash coming from black coal combustion. In addition, the mortars were prepared by using different alkali activators.

Mechanical Properties of Mortars Prepared by Alkali Activated Fly Ash Coming from Different Production Batches

2015 ◽  
Vol 244 ◽  
pp. 140-145 ◽  
Author(s):  
Matej Špak ◽  
Pavel Raschman
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Construction Materials ◽  
Chemical Properties ◽  
Raw Material ◽  
Fly Ashes ◽  
Coal Burning ◽  
Alkali Solutions ◽  
One Year ◽  
Alkali Activated

Fly ash is a well utilizable secondary raw material for the production of alkali activated construction materials. It is a significant alumina-silicates source suitable for the chemical reaction resulting in hardened composites. Physical and chemical properties of fly ashes as a co-product of coal burning mainly depend on characteristics of coal, burning temperature and combustion conditions. High variability of the properties of fly ash causes an uncertainty in the properties of alkali activated mortars. Time behaviour of the composition of the fly ash produced in a heating plant located in Košice, Slovakia as well as leaching behaviour of both alumina and silica from particular batches during one-year period was documented. Leaching tests were carried out using the distilled water and alkali solutions with three different concentrations. Both compressive and tensile strengths of alkali activated mortars were measured, and the correlation between the mechanical properties of hardened mortars and the chemical composition of fly ashes as well as their leaching characteristics was investigated.

scholarly journals Impacts of Casting Scales and Harsh Conditions on the Thermal, Acoustic, and Mechanical Properties of Indoor Acoustic Panels Made with Fiber-Reinforced Alkali-Activated Slag Foam Concretes

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 825 ◽  
Author(s):  
Mastali Mohammad ◽  
Kinnunen Paivo ◽  
Karhu Marjaana ◽  
Abdollahnejad Zahra ◽  
Korat Lidija ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Comparative Study ◽  
Sound Absorption ◽  
Acoustic Properties ◽  
Recycled Aggregates ◽  
Fiber Reinforced ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Harsh Conditions ◽  
Alkali Activated

This paper presents experimental results regarding the efficiency of using acoustic panels made with fiber-reinforced alkali-activated slag foam concrete containing lightweight recycled aggregates produced by using Petrit-T (tunnel kiln slag). In the first stage, 72 acoustic panels with dimension 500 × 500 × 35 mm were cast and prepared. The mechanical properties of the panels were then assessed in terms of their compressive and flexural strengths. Moreover, the durability properties of acoustic panels were studied using harsh conditions (freeze/thaw and carbonation tests). The efficiency of the lightweight panels was also assessed in terms of thermal properties. In the second stage, 50 acoustic panels were used to cover the floor area in a reverberation room. The acoustic absorption in diffuse field conditions was measured, and the interrupted random noise source method was used to record the sound pressure decay rate over time. Moreover, the acoustic properties of the panels were separately assessed by impedance tubes and airflow resistivity measurements. The recorded results from these two sound absorption evaluations were compared. Additionally, a comparative study was presented on the results of impedance tube measurements to compare the influence of casting volumes (large and small scales) on the sound absorption of the acoustic panels. In the last stage, a comparative study was implemented to clarify the effects of harsh conditions on the sound absorption of the acoustic panels. The results showed that casting scale had great impacts on the mechanical and physical properties. Additionally, it was revealed that harsh conditions improved the sound properties of acoustic panels due to their effects on the porous structure of materials.

scholarly journals Mix-design and Properties of Mortars from Alkali-activated Fly Ashes Containing High Amounts of Unburned Carbon Matter

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Stefania Manzi ◽  
Andrea Saccani ◽  
Luca Baldazzi ◽  
Isabella Lancellotti
Keyword(s):  
Ad Hoc ◽  
Environmental Benefits ◽  
Mix Design ◽  
Unburned Carbon ◽  
Carbonaceous Matter ◽  
Fly Ashes ◽  
Fresh State ◽  
Binder Ratio ◽  
Alkali Activated ◽  
Promising Type

AbstractAlkali-activated materials are a promising type of binder candidate as a substitute to Portland cement. Fly ashes can be used as binder precursors giving higher environmental benefits. In the present research, fly ashes (Type F) containing different amounts of unburned carbonaceous matter have been used to formulate mortars. Serious problems concerning the workability in the fresh state have been found when high carbon content are reached. An attempt to avoid the preliminary treatments used to eliminate the unburned matter is carried out by exploiting different mix-design receipts obtained by changing the water/binder ratio, the ratio of the alkaline activators and using different types of superplasticizer additives. Data so far collected underline that a high amount of unburned carbonaceous matter can not only compromise the mechanical properties of the materials, but also the rheological ones and underline the necessity to develop ad hoc additives for this type of binders.

Sign in / Sign up

Export Citation Format

Share Document