Production Potential and Economic Returns of Bed Planted Chickpea (Cicer arietinum L.) as Influenced by Different Intercropping Systems

2020 ◽  
Author(s):  
M.V. Priya ◽  
Thakar Singh ◽  
K.S. Saini ◽  
Sompal Singh
Keyword(s):  
Cicer Arietinum ◽  
Seed Yield ◽  
Cost Ratio ◽  
Yield Attributes ◽  
System Productivity ◽  
Cicer Arietinum L ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Benefit Cost ◽  
Equivalent Yield

Background: Chickpea (Cicer arietinum L.) is the third most important pulse crop produced after dry bean and peas in the world. Amongst pulses, chickpea is the major crop in India but for international market the quality of this crop has to be improved which may be possible by evaluation of different planting techniques. No systematic research and adequate technologies have been reported in Punjab on intercropping of different crops in chickpea. The current study aimed to find out the effect of different intercrops on growth and yield of bed planted chickpea based intercropping systems.Methods: A field experiment was carried out during the rabi season of 2017 and 2018 to evaluate the productivity and economic viability of bed planted chickpea based intercropping systems.The experiment was laid out in a randomized block design consisting of four replications with thirteen treatments.Result: Results showed that sole chickpea recorded highest seed yield and it was statistically at par with seed yield that obtained under chickpea + oats fodder (2:1), chickpea + oats fodder (4:1) and chickpea + linseed (4:1) intercropping systems. However, oilseed rape and barley as intercrops showed adverse effect on yield and yield attributes of chickpea. Chickpea + oats fodder in 2:1 row ratio recorded highest chickpea equivalent yield of 24.07 and 24.77 q/ha and system productivity of 15.96 and 15.60 kg/ha/day during 2017 and 2018, respectively. Higher net returns (Rs. 63098 and 70924/ha), benefit cost ratio (1.47 and 1.63) and production efficiency (417.9 and 446.1 Rs/ha/day) were also recorded in chickpea + oats fodder (2:1) intercropping system over sole chickpea (Rs. 44862 and 53769/ha and 1.21 and 1.41) during both the years. Chickpea + oats fodder (4:1), chickpea + linseed (2:1) and chickpea + linseed (4:1) also recorded significantly higher chickpea equivalent yield, net returns and benefit cost ratio as compared to sole chickpea.

scholarly journals Performance of lentil varieties under relay and minimum tillage conditions in T. Aman rice

2015 ◽  
Vol 40 (2) ◽  
pp. 271-278
Author(s):  
MR Islam ◽  
MK Uddin ◽  
MO Ali
Keyword(s):  
Seed Yield ◽  
Agricultural Research ◽  
Productive Efficiency ◽  
Cost Ratio ◽  
Research Station ◽  
Rabi Season ◽  
Yield Attributes ◽  
Minimum Tillage ◽  
Benefit Cost Ratio ◽  
Benefit Cost

A study on comparative productive efficiency and feasibility of lentil varieties both at relay and minimum tillage were conducted at the Regional Agricultural Research Station, BARI, Ishurdi, Pabna, Bangladesh during the Rabi season of 2007-08 and 2008-09. Three lentil varieties viz. BARI Masur-2, BARI Masur-3 and BARI Masur-4 and two sowing methods viz. relay sowing and furrow sowing (Minimum tillage) were compared. The highest seed yield (1.59 t/ha) was obtained from BARI Masur-4 because of highest number of pods/plant and plant population/m2 while lowest from BARI Masur-2 (1.39 t/ha). The sowing methods had significant effect on the seed yield of lentil. Crops sown in furrows produced higher seed yield (1.60 t/ha) than that of crops in relay sowing. The interaction effect between varieties and sowing methods also had significant effect on the seed yield and yield attributes. The lentil variety BARI Masur-4 when grown in furrows gave the highest seed yield (1.70 t/ha). Though seed yield and gross return were highest in furrow sowing but highest benefit cost ratio (4.67) was found in relay sowing method.Bangladesh J. Agril. Res. 40(2): 271-278 June 2015

scholarly journals Performance of Pigeonpea (Cajanus cajan. L) Varieties under Different Spacings During Rabi Season

2020 ◽  
pp. 61-66
Author(s):  
K. Indudha Reddy ◽  
A. V. Ramanjaneyulu ◽  
M. V. Nagesh Kumar ◽  
C. V. Sameer Kumar ◽  
M. Venkata Ramana
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Cost Ratio ◽  
Rabi Season ◽  
Benefit Cost Ratio ◽  
Pooled Data ◽  
Net Returns ◽  
Long Duration ◽  
Plant Densities ◽  
Benefit Cost

An experiment was conducted with the objective of ascertaining the feasibility of cultivation of pigeonpea during rabi season in the alfisols of Southern Telangana Zone. Further, it was designed to understand the performance of pigeonpea genotypes at various plant densities and also the economics of pigeonpea cultivation during rabi season. It consisted of 12 treatments with four plant densities in main plots and three genotypes in sub plots in split plot design. The pooled data of 2015-16 and 2016-17 revealed that significantly higher seed yield (1532 kg ha-1) was recorded at plant density of 60 cm × 10 cm spacing than at 45cm × 10cm (1332 kg/ha), 75 cm × 10 cm (1321 kg/ha) and 90 cm × 10 cm (1141 kg/ha). Among the genotypes, the seed yield in PRG-158 (1547 kg/ha) and Asha (ICPL 87119) (1591 kg/ha) was on par with each other but significantly higher than in PRG-176 (857 kg/ha). The higher gross returns (Rs. 77366 ha-1), net returns (Rs.46733 ha-1) and benefit cost ratio (2.53) was recorded at plant density of 60 cm × 10 cm spacing than at other tested plant densities (45 cm × 10 cm, 75 cm × 10 cm and 90 cm × 10 cm). Among the genotypes, Asha (ICPL 87119) registered highest gross returns (Rs. 80346 ha-1), net returns (Rs.49711 ha-1) and benefit cost ratio (2.62) followed by PRG-158 (gross returns of Rs. 78124ha-1, net returns of Rs.47489 ha-1 and benefit cost ratio of 2.55) and PRG-176 (gross returns of Rs. 43279ha-1, net returns of Rs.13144 ha-1 and benefit cost ratio of 1.44). Thus, the spacing of 60 cm × 10 cm is recommended for the cultivation of pigeonpea during rabi season in alfisols of Southern Telangana Zone with long duration varieties like PRG-158 and Asha (ICPL-87119).

scholarly journals Assessment of Micro and Secondary Nutrient Combinations for Yield, Yield Attributes, and Economic Profitability of Mustard in Mid Indo-Gangetic Plains of Bihar

2021 ◽  
pp. 43-51
Author(s):  
Vijay Kumar ◽  
Abhay Kumar Singh ◽  
Surendra Prasad ◽  
Anupama Kumari ◽  
M. S. Kundu ◽  
...  
Keyword(s):  
Seed Yield ◽  
Block Design ◽  
Cost Ratio ◽  
Yield Attributes ◽  
Gangetic Plains ◽  
Benefit Cost Ratio ◽  
Combined Application ◽  
Randomized Block Design ◽  
Stover Yield ◽  
Benefit Cost

An on-farm trial was established at Saran district of Bihar, aiming to assess the different combinations of micro and secondary nutrients on yield and economic profitability of mustard (var. Rajendra suphalam). The experiment comprised three treatments i.e., T1: RD-S+Zn (Farmer practices), T2: RD-S+B and T3: RD-S+B+Zn and seven replications performed under a completely randomized block design during 2018-19. Results of the experiment revealed that combined application of sulphur, boron and zinc  significantly improved the number of seeds per siliqua: 37.2%, stover yield: 12.3% & seed yield: 33.3% over farmers practice (T1: RD-S+Zn). The highest seed yield and gross return in treatment T3: RD-S+B+Zn was well reflected in  the maximum net return (Rs. 40954.0 ha-1) and benefit-cost ratio (2.29). In conclusion, the combined application of sulphur, boron and zinc was performed better for mustard cultivation in the middle Indo-Gangetic plains of Bihar.

Energetics, Productivity and Profitability of Soybean (Glycine max)-Based Intercropping Systems under Different Planting Patterns

2020 ◽  
Author(s):  
Jagmohan Kaur ◽  
Thakar Singh ◽  
K. S. Saini
Keyword(s):  
Mung Bean ◽  
Production Efficiency ◽  
Cost Ratio ◽  
Energy Productivity ◽  
North West ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Benefit Cost ◽  
Equivalent Yield ◽  
Better Than

Background: Intercropping is an effective tool to enhance productivity, biodiversity and stability of the fragile agro-ecosystem. In the era of shrinking resources, intercropping based on pulse crops like soybean can play an important role in crop diversification as well as agricultural sustainability. But, the information on soybean based intercropping systems is limited and needs to be explored for north-west India. Methods: A field experiment was conducted during kharif seasons of 2015 and 2016 to evaluate the effect of different soybean based intercropping systems under different planting patterns on productivity, profitability and energetics. Soybean crop was planted as sole as well as in intercropping systems viz., soybean (45 cm) + mung bean (1:1), soybean (45 cm) + cowpea fodder (1:1), soybean (45 cm) + groundnut (1:1), soybean (45 cm) + maize fodder (1:1) , soybean (60 cm) + mash (1:1), soybean (60 cm) + mung bean (1:2), soybean (60 cm) + cowpea fodder (1:2), soybean (60 cm) + groundnut (1:2), soybean (60 cm) + maize fodder (1:2) and soybean (60 cm) + maize (grain) (1:1). Result: The pooled results over two years elucidated that soybean equivalent yield was affected significantly by different intercropping systems. Soybean (45 cm) + groundnut (1:1) produced the highest soybean equivalent yield and it was significantly better than all other systems except soybean (60 cm) + groundnut in 1:2 row ratio. Similar trend was followed by production efficiency. Both, soybean (45 cm) + groundnut (1:1) and soybean (60cm) + groundnut (1:2) systems produced significantly higher energy productivity as compared to sole soybean. The highest gross (Rs. 98185 /ha) and net returns (Rs. 56122/ha) were obtained in soybean (45 cm) + groundnut (1:1) intercropping system whereas the highest benefit cost ratio was obtained in soybean (60 cm) + maize fodder (1:2) system.

scholarly journals Effect of Different Mulches on the Biometric Performance of Cucumber Crop under Polyhouse

2021 ◽  
pp. 82-89
Author(s):  
B. Mukesh Goud ◽  
Y. Siva Lakshmi ◽  
N. Prathyusha ◽  
B. Jayasri
Keyword(s):  
Growth Parameters ◽  
Fruit Yield ◽  
Cost Ratio ◽  
Lower Growth ◽  
Yield Attributes ◽  
Organic Mulch ◽  
Benefit Cost Ratio ◽  
Agricultural Engineering ◽  
Net Returns ◽  
Benefit Cost

The present study entitled “Effect of different mulches on the biometric performance of cucumber crop under polyhouse” was conducted during summer, 2019 at polyhouse, College of Agricultural Engineering, Kandi. Sangareddy, Telangana. Treatments consisted of five different mulches (White transparent, Black and silver, Black, Organic (paddy straw) and without mulch). The experiment was laid out in a randomized block with four replications. Growth parameters visually vine length and the number of leaves plant-1 differed significantly with different mulches and cucumber without mulch gave significantly higher growth parameters, followed by black and silver, black, white transparent whereas significantly lower growth parameters were recorded with organic mulch. The yield attributes visually the number of fruits plant-1, fruit length and fruit circumferences were significantly superior with cucumber without mulch whereas significantly lower yield attributes were observed in organic mulch. Fruit yield ha-1 was significantly higher with cucumber without mulch. Organic mulch recorded significantly lower fruit yield ha-1. Gross and net returns were higher with cucumber without mulch whereas significantly lower gross and net returns were observed in organic mulch. The highest benefit-cost ratio was observed with cucumber without mulch whereas the lowest benefit-cost ratio was observed with white transparent mulch. The study has shown that cucumber can be grown without any mulch during the summer season under polyhouse at Central Telangana Zone of Telangana.

EFFECT OF DIFFERENT DOSES OF BORON ON GROWTH AND YIELD OF OFF-SEASON CAULIFLOWER (BRASSICA OLERACEA VAR. BOTRYTIS) IN ARGHAKHANCHI, NEPAL

2020 ◽  
Vol 1 (1) ◽  
pp. 12-17
Author(s):  
Srijana Pandey ◽  
Sapana Parajuli ◽  
Biplov Oli ◽  
Surya Dhungana
Keyword(s):  
Brassica Oleracea ◽  
Growth Parameters ◽  
Block Design ◽  
Leaf Length ◽  
Growth And Yield ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Benefit Cost ◽  
Different Doses

The research was conducted at Beltari Sandhikharka-10, Arghakhanchi district to study about the effect of various doses of boron on growth and yield attributing characters of cauliflower (Brassica oleracea var. botrytis) during off-season from February to June in 2020. Five treatments; B0 (control/no application), B1: 2kg/ha, B2: 4kg/ha, B3: 6kg/ha, B4: 8kg/ha which are the different doses of boron application were laid out in Randomized Complete Block Design (RCBD) with 4 replications. The growth parameters like plant height, number of leaves per plant leaf length and leaf breadth of largest leaf were recorded multiple times with 15 days interval. Days to curd initiation and Days from curd initiation to harvest were recorded by regular field observation. The yield parameters; curd weight with leaves, Marketable curd weight, average curd yield, incidence of hollowing were recorded during harvest. The economics from application of boron doses in cauliflower production was obtained in terms of cost of cultivation, gross returns, net returns, and benefit cost ratio. The result showed that the growth and yield attributing characters of cauliflower were significantly affected by application of boron in which the value of these parameters was found significantly higher in B1 followed by other treatments. The average curd yield of cauliflower in B1 was found to be 12.39 mt/ha which was 48.92% higher than that of B0 with curd yield 8.32 mt/ha. Similarly, the net return was found significantly the highest in B1 and the lowest in B0. The result showed that application of boron in the range of 2-4 kg/ha is preferred to control and higher doses in respect of both productivity and economics.

scholarly journals Impact of Different Water Management Regimes on the Growth, Productivity, and Resource Use Efficiency of Dry Direct Seeded Rice in Central Punjab-Pakistan

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1151
Author(s):  
Sadam Hussain ◽  
Saddam Hussain ◽  
Zubair Aslam ◽  
Muhammad Rafiq ◽  
Adeel Abbas ◽  
...  
Keyword(s):  
Grain Yield ◽  
Hybrid Rice ◽  
Water Productivity ◽  
Dry Weight ◽  
Cost Ratio ◽  
Yield Attributes ◽  
Benefit Cost Ratio ◽  
Direct Seeded ◽  
Total Dry Weight ◽  
Benefit Cost

Dry direct-seeded rice has been shown to save irrigation water and labor. Nonetheless, irrigation management in dry direct-seeded rice has received very little attention. Here, we examined the potential of different irrigation regimes: aerobic rice (AR), alternate wetting and drying (AWD) and continuous flooding (CF) in dry direct-seeded rice cultivation on two rice cultivars (Pride-1 (hybrid indica) and NB-1 (inbred indica)). Growth, yield attributes, grain yield, total water input, water productivity and benefit cost ratio were measured. Our results showed that AR saved 11.22 and 28.40%, and 5.72 and 32.98% water compared with AWD and CF during 2018 and 2020, respectively. There was a significant difference in grain yield among treatments and cultivars. AWD and CF produced statistically same total dry weight and grain yield, while AR reduced the total dry weight by 31.34% and 38.04% and grain yield by 34.82% and 38.16% in comparison to AWD and CF, respectively, across the years. Except for 1000-grain weight and harvest index in AWD and CF, further differences in total dry weight and grain yield among irrigation treatments were primarily correlated with variations in yield attributes. Among the cultivars, hybrid rice performed better than inbred rice. Over the two-year period, hybrid rice increased total dry weight, grain yield, and water productivity by 9.28%, 13.05%, and 14.28%, respectively, as compared to inbred rice. Regarding water productivity (WP), the maximum percentage (40.90 and 26.53%) was recorded for AWD compared to AR and CF. Among cultivars, more water productivity (14.28%) was calculated for hybrid rice than inbred one. Chlorophyll and carotenoid contents, leaf area index and crop growth rate contributed to higher grain yield of hybrid rice under AWD and CF. In contrast to WP, the maximum benefit cost ratio was estimated to be higher for CF than that of AR and AWD. For the cultivars, the maximum value (2.26 in 2018 and 2.32 in 2020) was calculated for hybrid rice compared with the inbred one. In conclusion, these results suggests that AWD with maximum WP and CF with maximum BCR could be more efficient approaches than AR. Under CF, hybrid rice cultivars with higher yield and yield-related attributes, WP and BCR performed better.

scholarly journals Effect of spacing and fertilizer management on the yield and yield attributes of mukhikachu (Colocasia esculenta Schott.)

2016 ◽  
Vol 41 (4) ◽  
pp. 713-723
Author(s):  
S Akther ◽  
F Ahmed ◽  
MR Islam ◽  
MA Hossen ◽  
AHMM Rahman Talukder
Keyword(s):  
Field Experiments ◽  
Block Design ◽  
Recommended Dose ◽  
Cost Ratio ◽  
Plant Spacing ◽  
Yield Attributes ◽  
Benefit Cost Ratio ◽  
Maximum Benefit ◽  
Randomized Complete Block Design ◽  
Benefit Cost

Field experiments were carried out in the Agronomy field of BARI, Joydebpur, RARS, Jamalpur and RARS, Ishurdi during two consecutive kharif seasons of 2012 and 2013 to determine the suitable plant spacing and optimum fertilizer dose for higher yield of mukhikachu. Three levels of spacing viz., 60 cm x 60 cm, 60 cm x 45 cm and 60 cm x 30 cm and three levels of fertilizer dose viz., recommended dose (3000-96-27-81-18 kg ha-1 of CD-N-P-K-S), 25% less than the recommended dose and 25% higher than the recommended dose were used as treatment variables. The experiments were laid out in factorial randomized complete block design with three replications. Results revealed that the closer spacing (60 cm x 30 cm) in combination with 25% higher than the recommended fertilizer dose gave the maximum edible yield of mukhikachu (two years average) at all locations (20.04 t ha-1, 20.75 t ha-1 and 16.63 t ha-1 at Joydebpur, Jamalpur and Ishurdi, respectively). The wider spacing (60 cm x 60 cm) coupled with 25% less than the recommended fertilizer dose produced the lowest yield (two years average). The maximum benefit- cost ratio (two years average) was obtained from the combination of the recommended fertilizer dose and 60 cm x 30 cm spacing, that were 2.93 at Joydebpur and 3.42 at Ishurdi, while at Jamalpur the maximum benefit-cost ratio (two years average) was found maximum from 60 cm x 30 cm spacing with 25% higher than the recommended fertilizer dose (3.12).Bangladesh J. Agril. Res. 41(4): 713-723, December 2016

scholarly journals Profitability and yield gap between research station and farm level of Binamoog-8

2017 ◽  
Vol 2 (4) ◽  
pp. 685-688
Author(s):  
Syful Islam ◽  
Mangal Chandra Chanda ◽  
Mohammad Rashidul Haque ◽  
Razia Sultana ◽  
Muhammad Yunus
Keyword(s):  
Cost Ratio ◽  
Research Station ◽  
Yield Gap ◽  
Farm Level ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Field Level ◽  
Power Tiller ◽  
Benefit Cost ◽  
Labour Power

Estimating profitability and yield gap between research station and farm level of Binamoog-8 was conducted in five major Binamoog-8 growing areas of Bangladesh, namely Ishwardi, Magura, Natore, Jessore and Meherpur. The average cost of production in farm level of Binamoog-8 is Tk. 47373.55ha-1 and higher in Ishwardi (Tk. 53454.92 ha-1) followed by Meherpur, Magura, Natore and Jessore of Tk. 45160.28, Tk. 44300.14, Tk. 45232.95 and Tk. 48719.47 per hectare, respectively .The major shares of total cost were human labour, power tiller and irrigation. The net returns were Tk. 41160, Tk. 42902.30, Tk. 53603.18, Tk. 47494.60 and Tk. 40437.16 per hectare followed in Ishwardi, Meherpur, Magura, Natore and Jessore, respectively. The highest net return (Tk. 53603.18 ha-1) comes from Magura district for Binamoog-8.The undiscounted average benefit cost ratio over full cost basis were 1.77, 1.95, 2.21, 2.05 and 1.83 for Binamoog-8 in field level for Ishwardi, Meherpur, Magura, Natore and Jessore, respectively. The average yield gap of Binamoog-8 in farm level and research station was 129.05 kg per hectare. The yield gap between research station and farm level were 102.97 kg, 185.50 kg, 45.85 kg, 128.50 kg and 182.45 kg per hectare for Binamoog-8 in Ishwardi, Meherpur, Magura, Natore and Jessore, respectively. The highest yield gap between research station and field level was in Meherpur (185.50 kg per hectare) and lowest in Magura (45.85 kg per hectare). Farmers were facing various constraints in Binamoog-8 cultivation. Different strategies, such as lack of quality seed and fertilizer in appropriate time, lack of credit facilities, rainfall during germination period, insect infestation and pathogen infection, pod maturity in different times have been discussed as strategies to minimize yield gaps.Asian J. Med. Biol. Res. December 2016, 2(4): 685-688

scholarly journals Agro-Economic Performance of Intercropping Hybrid Maize with Vegetables and Spices at Farmer’s Field

2019 ◽  
Vol 21 (2) ◽  
pp. 73-78
Author(s):  
MI Nazrul
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Cost Ratio ◽  
Gross Margin ◽  
Benefit Cost Ratio ◽  
Randomized Complete Block Design ◽  
Hybrid Maize ◽  
Benefit Cost ◽  
Sylhet Region ◽  
Equivalent Yield

The experiment was conducted at Multi Location Testing (MLT) site, Moulvibazar, Bangladesh during rabi season of 2016-17 and 2017-18 to study the profitability of intercropping of hybrid maize with vegetables and spices. Five intercrop combinations of hybrid maize along with sole maize were arranged in randomized complete block design (RCBD) replicated six times. There were six treatments viz., T1: Maize + potato, T2: Maize + red amaranth, T3: Maize + spinach, T4: Maize+ data shak, T5: Maize + coriander and T6: Maize as sole. The grain yield of maize in intercropped combination varied significantly. The highest grain yield (9.71 t ha-1) was in sole maize. The highest maize equivalent yield 15.60 t ha-1 was recorded from the treatment T1 (100% maize + potato) whereas the lowest yield (8.61 t ha-1) was obtained from the treatment T6 (sole maize). The highest gross return (Tk. 312000 ha-1) and benefit cost ratio (3.29) was obtained from the treatment T1 (100% maize + potato). On the contrary, the lowest gross margin (Tk. 101600 ha-1) was obtained from treatment T2 (maize + red amaranth). It revealed that the combination of maize with potato was more compatible and profitable intercropping system in Sylhet region of Bangladesh Bangladesh Agron. J. 2018, 21(2): 73-78

Sign in / Sign up

Export Citation Format

Share Document