Hydropriming accelerates seed germination of Medicago sativa under stressful conditions: A thermal and hydrotime model approach

2017 ◽  
Author(s):  
Rong Li ◽  
Dandan Min ◽  
Lijun Chen ◽  
Chunyang Chen ◽  
Xiaowen Hu
Keyword(s):  
Water Potential ◽  
Germination Rate ◽  
High Water ◽  
Nacl Stress ◽  
Base Temperature ◽  
Severe Water Stress ◽  
Hydrotime Model ◽  
Response To Temperature ◽  
Base Water Potential ◽  
Temperature Water

This study determined the effects of priming on germination in response to temperature, water potential and NaCl. Thermal and hydrotime models were utilized to evaluate changes in parameters of the model after priming. Priming reduced the amount of thermal time in both cultivars, but slightly increased the base temperature for germination from 1.0 to 3.5°C in “Longdong”. Priming significantly increased germination rate at high water potential but had no effect at low water potential. Further, priming reduced the hydrotime constant but made the median base water potential value slightly more positive in both cultivars. Thus, priming increased germination rate in water but decrease it under severe water stress. Germination rate was significantly increased in both cultivars under salinity (NaCl) stress. Moreover, priming improved seedling growth in response to temperature, water and salinity stress in both cultivars.

Seed dormancy in red rice. XII: Population-based analysis of dry-afterripening with a hydrotime model

2007 ◽  
Vol 17 (4) ◽  
pp. 253-271 ◽  
Author(s):  
Alberto Gianinetti ◽  
Marc Alan Cohn
Keyword(s):  
Water Potential ◽  
Germination Rate ◽  
Red Rice ◽  
Decay Kinetics ◽  
Water Potentials ◽  
Secondary Dormancy ◽  
Seed Population ◽  
The Mean ◽  
Hydrotime Model ◽  
Base Water Potential

AbstractRed rice (Oryza sativaL.) dispersal units (florets) were dry-afterripened for 0–8 weeks and subsequently incubated at 30°C in polyethylene glycol (PEG) solutions with water potentials from 0 to − 1.6 MPa. Germination percentages and rates increased with dry-afterripening and water potential of the incubation medium. The seed population exhibited a normal distribution of base water potentials (Ψb, i.e. minimum water potential allowing germination) among individual seeds, characterized by three parameters: the hydrotime constant (θH), the mean base water potential (Ψb) and the standard deviation of the base water potential distribution (σΨb). Changes in germination during afterripening could be described by modifications of such parameters, particularlyΨb, which was employed to derive an index, DH(ARX = Ψb(ARX) − Ψb(ARN), where DH(ARX) represents a measure of dormancy of the seed population (in MPa) based on the hydrotime model,Ψb(ARX) is the mean base water potential of the seed population at any afterripening timeX, andΨb(ARN) is the mean water potential of the non-dormant (fully afterripened) population. The introduction of this index permitted interpretation of afterripening as a measurable reduction in the dormancy status of the seed, with progressive acquisition of both full germinative capacity and maximum germination rate, as anticipated by the hydrotime model. Moreover, secondary dormancy was induced proportionally to the reduction in water potential in the dark. Susceptibility to secondary dormancy induction was defined through DI(ARX), an index analogous to DH(ARX). These indices revealed that, in red rice, both breaking of primary dormancy and the inducibility of secondary dormancy followed decay kinetics with different sensitivities to the duration of dry storage.

scholarly journals Germination response of Hylocereus setaceus (Salm-Dyck ex DC: ) Ralf Bauer (Cactaceae) seeds to temperature and reduced water potentials

2010 ◽  
Vol 70 (1) ◽  
pp. 135-144 ◽  
Author(s):  
E. Simão ◽  
M. Takaki ◽  
VJM. Cardoso
Keyword(s):  
Water Potential ◽  
Germination Rate ◽  
Base Temperature ◽  
Temperature Range ◽  
Water Potentials ◽  
Germination Response ◽  
Wide Range ◽  
Optimum Interval ◽  
Time Courses ◽  
Base Water Potential

The germination response of Hylocereus setaceus seeds to isothermic incubation at different water potentials was analysed by using the thermal time and hydrotime models, aiming to describe some germination parameters of the population and to test the validity of the models to describe the response of the seeds to temperature and water potential. Hylocereus setaceus seeds germinated relatively well in a wide range of temperatures and the germination was rate limited from 11 to 20 °C interval and beyond 30 °C until 40 °C, in which the germination rate respectively shifts positively and negatively with temperature. The minimum or base temperature (Tb) for the germination of H. setaceus was 7 °C, and the ceiling temperature varied nearly from 43.5 to 59 °C depending on the percent fraction, with median set on 49.8 °C. The number of degrees day necessary for 50% of the seeds to germinate in the infra-optimum temperature range was 39.3 °C day, whereas at the supra-optimum interval the value of θ = 77 was assumed to be constant throughout. Germination was sensitive to decreasing values of ψ in the medium, and both the germinability and the germination rate shift negatively with the reduction of ψ, but the rate of reduction changed with temperature. The values of base water potential (ψb) shift to zero with increasing temperatures and such variation reflects in the relatively greater effect of low ψ on germination in supra optimum range of T. In general, the model described better the germination time courses at lower than at higher water potentials. The analysis also suggest that Tb may not be independent of ψ and that ψb(g) may change as a function of temperature at the infra-otimum temperature range.

scholarly journals Calculating "Hydrothermal time" to quantify seed germination of tall fescue

2016 ◽  
Vol 78 ◽  
pp. 163-168 ◽  
Author(s):  
S. Sharifiamina ◽  
D.J. Moot ◽  
M. Bloomberg
Keyword(s):  
Water Potential ◽  
Tall Fescue ◽  
Festuca Arundinacea ◽  
Germination Rate ◽  
Base Temperature ◽  
Hydrothermal Time ◽  
Effects Of Temperature ◽  
Moisture Conditions ◽  
Base Water Potential ◽  
Moderate Stress

The objective of this study was to quantify the combined effects of temperature and moisture on germination of tall fescue seed. Seeds were incubated for up to 50 days at a range of constant temperatures (5-35ºC) and germinated at five water potentials (0, -0.18, -0.37, -0.63 and -0.95 MPa). The maximum final germination percentages were 94 to 98 at 15-30ºC when water was not limited (0 MPa). Germination rate increased linearly from 5 to 27.5ºC, and then decreased linearly from 27.5 to 32.5ºC. Extrapolation of the sub-optimal temperatures identified a base temperature of 3.5 ± 0.5ºC and an optimum temperature of 27.5ºC. More negative water potential indicative of drier conditions, delayed germination and reduced germination rate. The average base water potential was -0.95 MPa at the suboptimal range of temperatures. An optimum range of germination (80-100%) occurred when temperatures were between 10 and 30ºC and water potential was between 0 to -0.37 MPa (moderate stress). These results provide a matrix of soil temperature and moisture conditions that are expected to result in successful germination and therefore provide the maximum opportunity for emergence of tall fescue seedlings. Keywords: Festuca arundinacea, 'Finesse Q', hydrothermal time

scholarly journals Hydrotime model to evaluate the effects of a set of priming agents on seed germination of two leek cultivars under water stress

2021 ◽  
Author(s):  
Alessandro Romano ◽  
Romana Bravi
Keyword(s):  
Water Stress ◽  
Water Deficit ◽  
Germination Rate ◽  
Intraspecific Variability ◽  
Germination Percentage ◽  
Allium Ampeloprasum ◽  
Cultivated Species ◽  
Hydrotime Model ◽  
Base Water Potential ◽  
Peg 8000

Water deficit is one of the main constraints of germination for many cultivated species. Among the techniques used to promote germination, seeds priming has been found to play a key role. In the present study, a set of different priming agents (KCl, KH2PO4, CaCl2 and PEG 8000) was tested on seeds of two leek (Allium ampeloprasum L.) cultivars (“Lungo della riviera” and “Monstrueux de Carentan”) to assess the effects on germination performances both in optimal hydration condition (Ψw = 0 MPa) and under water deficit (−0.3 and −0.6 MPa). Germination percentage of “Lungo della riviera” was improved by PEG and KCl at −0.3 MPa and −0.6 MPa, respectively, whereas CaCl2 improved germination of “Monstrueux de Carentan” at −0.6 MPa. Osmopriming was beneficial in terms of germination rate although to different extent depending on genotype and priming agent. The hydrotime model showed that the effects of priming on germination rate was mostly due to a lowering of the predicted hydrotime constant (θH), whereas median base water potential Ψb(50) tended to increase following treatments albeit with some exception. In this study, hydrotime model proved to be a useful tool to test the effectiveness of different priming treatments on leek seeds and the intraspecific variability in germination capability and speed under water stress.

scholarly journals A hydrothermal after-ripening time model for seed dormancy loss in Bromus tectorum L.

2006 ◽  
Vol 16 (1) ◽  
pp. 17-28 ◽  
Author(s):  
Necia B. Bair ◽  
Susan E. Meyer ◽  
Phil S. Allen
Keyword(s):  
Water Potential ◽  
Time Course ◽  
Bromus Tectorum ◽  
Base Temperature ◽  
Time Model ◽  
Seed Collection ◽  
Ripening Time ◽  
Water Potentials ◽  
Ripening Rate ◽  
Base Water Potential

After-ripening, the loss of dormancy under dry conditions, is associated with a decrease in mean base water potential for germination ofBromus tectorumL. seeds. After-ripening rate is a linear function of temperature above a base temperature, so that dormancy loss can be quantified using a thermal after-ripening time (TAR) model. To incorporate storage water potential into TAR, we created a hydrothermal after-ripening time (HTAR) model. Seeds from twoB. tectorumpopulations were stored under controlled temperatures (20 or 30 °C) and water potentials (−400 to −40 MPa). Subsamples were periodically removed from each storage treatment and incubated at 15 or 25 °C to determine germination time courses. Dormancy status (mean base water potential) was calculated from each time course using hydrothermal time equations developed for each seed collection. Seeds stored at −400 MPa did not after-ripen. At water potentials from −400 to −150 MPa, the rate of after-ripening increased approximately linearly with increasing water potential. Between −150 and −80 MPa, there was no further increase in after-ripening rate, while at −40 MPa seeds did not after-ripen and showed loss of vigour. These results suggest that the concept of critical water potential thresholds, previously shown to be associated with metabolic activity and desiccation damage in partially hydrated seeds, is also relevant to the process of after-ripening. The HTAR model generally improved field predictions of dormancy loss when the soil was very dry. Reduced after-ripening rate under such conditions provides an ecologically relevant explanation of how seeds prolong dormancy at high summer soil temperatures.

Variability in temperature-dependent germination in eastern black nightshade (Solanum ptycanthum)

1991 ◽  
Vol 69 (7) ◽  
pp. 1463-1470 ◽  
Author(s):  
L. A. Hermanutz ◽  
S. E. Weaver
Keyword(s):  
Genetic Variability ◽  
Cultural Practices ◽  
Germination Rate ◽  
Base Temperature ◽  
Range Limit ◽  
Temperature Dependent ◽  
Marginal Populations ◽  
Solanum Ptycanthum ◽  
Temperature Regimes ◽  
Response To Temperature

The colonization potential of the northwardly migrating weed Solanum ptycanthum was evaluated by comparing germination profiles of southern agrestal populations with northern marginal populations sampled from both ruderal and agrestal habitats. Under laboratory conditions, the seed from five maternal families from each population was subjected to six light:dark temperature regimes from 18:8 to 40:30 °C and germination rate (time to 50% germination) and final percent germination were monitored. The base temperature and thermal time (degree-days) required for 50% germination were calculated. Seeds from southern agrestal populations germinated over a broader temperature range than northern agrestal populations but had similar rates of germination, base temperatures, and thermal times. At the northern range limit, ruderal populations germinated faster and had smaller thermal times than agrestal populations but had similar base temperatures. Delayed emergence in agrestal habitats may be a response to cultural practices. Seeds from northern populations were heavier than southern populations. Plasticity of germination response to temperature did not differ between populations. The observed levels of genetic variability in all germination parameters suggest that future range expansion would be possible. Key words: temperature-dependent germination, agrestal, ruderal, marginal populations, genetic variability, plasticity.

scholarly journals Quantification of Germination Response of Millet (Panicum miliaceum L.) Seeds to Water Potential and Priming using Hydrotime Model

2019 ◽  
Vol 52 (2) ◽  
pp. 178-185
Author(s):  
S.A. Tabatabaei ◽  
N. Bayatian ◽  
S. Nikoumaram ◽  
O. Ansari
Keyword(s):  
Water Potential ◽  
Arid Regions ◽  
Biological Process ◽  
Physical Factors ◽  
Panicum Miliaceum ◽  
Germination Response ◽  
Complex Biological Process ◽  
Hydrotime Model ◽  
Short Time ◽  
Temperature Water

Abstract Seed germination is a complex biological process that is influenced by different environmental physical factors including temperature, water potential, salinity, pH and light, as well as intrinsic genetic factors. In such environments, the water needed for germination is available for only a short time, and consequently, successful crop establishment depends not only on rapid and uniform germination of the seedlot, but also on its ability to germinate under low water availability. All of these attributes can be analyzed through the hydrotime model (HT). Millet (Panicum miliaceum L.) is cultivated in arid and semi-arid regions of Iran. Therefore, in this study, using the hydrotime modeling approach, germination response of millet to priming (water and gibberellin 50 ppm at 15°C for 24 h) and water potential (0, -0.3, -0.6, -0.9, and -1.2 Mpa) was studied. Hydrotime (HT) model were fitted to cumulative germination of seeds and recorded in germination tests carried out at different water potentials (0, -0.3, -0.6, -0.9 and -1.2 MPa) and priming treatments (control, hydropriming and hormone priming). Results showed that, germination of millet decreased significantly with reduction of osmotic potential. Results indicated that the hydro-time constant (θH) for control, hydro-priming and hormone priming were 0.89, 0.79 and 0.67 MPa d, the water potential (Ψb(50)) for control, hydropriming and hormone priming were -0.89, -0.94 and -1.11 MPa, respectively. Results indicated that the use of hydrotime model in germination prediction could be useful to provide more accurate estimates for the timing of sowing and management of millet.

Temperature- and moisture-dependent models of seed germination and shoot elongation in green and redroot pigweed (Amaranthus powellii, A. retroflexus)

Weed Science ◽  
1997 ◽  
Vol 45 (4) ◽  
pp. 488-496 ◽  
Author(s):  
Joseph O. E. Oryokot ◽  
Stephen D. Murphy ◽  
A. Gordon Thomas ◽  
Clarence J. Swanton
Keyword(s):  
Seed Germination ◽  
Water Potential ◽  
Weed Management ◽  
Germination Rate ◽  
Shoot Elongation ◽  
Thermal Time ◽  
Base Temperature ◽  
Mathematical Function ◽  
Redroot Pigweed ◽  
Mean Temperature

To predict weed emergence and help farmers make weed management decisions, we constructed a mathematical model of seed germination for green and redroot pigweed based on temperature and water potential (moisture) and expressing cumulative germination in terms of thermal time (degree days). Empirical observations indicated green pigweed germinated at a lower base temperature than redroot pigweed but the germination rate of redroot pigweed is much faster as mean temperature increases. Moisture limitation delayed seed germination until 23.8 C (green pigweed) or 27.9 (redroot pigweed); thereafter, germination was independent of water potential as mean temperatures approached germination optima. Our germination model, based on a cumulative normal distribution function, accounted for 80 to 95% of the variation in seed germination and accurately predicted that redroot pigweed would have a faster germination rate than green pigweed. However, the model predicted that redroot pigweed would germinate before green pigweed (in thermal time) and was generally less accurate during the early period of seed germination. The model also predicted that moisture limitation would increase, rather than delay, seed germination. These errors were related to the mathematical function chosen and analyses used, but an explicit interaction term for water potential and temperature is also needed to produce an accurate model. We also tested the effect of mean temperature on shoot elongation (emergence) and described the relationship by a linear model. Base temperatures for shoot elongation were higher than for seed germination. Shoot elongation began at 15.6 and 14.4 C for green and redroot pigweed, respectively; they increased linearly with temperature until the optimum of 27.9 C was reached. Elongation was dependent on completion of the rate-limiting step of radicle emergence and was sensitive to temperature but not moisture; hence, elongation was sensitive to a much smaller temperature range. Beyond mathematical changes, we are testing our model in the field and need to link it to ecophysiological, genetic, and spatially explicit population processes for it to be useful in decision support for weed management.

Incubation under fluctuating temperatures reduces mean base water potential for seed germination in several non-cultivated species

2005 ◽  
Vol 15 (2) ◽  
pp. 89-97 ◽  
Author(s):  
Roberto Huarte ◽  
Roberto L. Benech-Arnold
Keyword(s):  
Seed Germination ◽  
Water Potential ◽  
Osmotic Potential ◽  
Quantitative Description ◽  
Maximum Temperature ◽  
The Mean ◽  
Hydrotime Model ◽  
Total Seed ◽  
Base Water Potential ◽  
Fluctuating Temperatures

Seeds ofCarduus acanthoides,Cynara cardunculus,Cirsium vulgare,Brassica campestris, andSisymbrium altissimumwere incubated at a range of decreasing osmotic potentials (Ψo) under fluctuating temperatures or the median temperature of the fluctuation cycle. Fluctuating temperatures promoted total seed germination in water and at reduced osmotic potential. Total germination was reduced as the Ψodecreased. However, this trend was smallest under fluctuating temperatures, signalling a higher tolerance of seeds to reduced osmotic potential. Effects of osmoticum and temperature were modelled with the hydrotime model. The parameters estimated from the model, the hydrotime constant (θH), the mean base water potential Ψb(50) and its standard deviation (σΨb) gave good descriptions of germination time courses. For all species, incubation under fluctuating temperatures shifted Ψb(50) values downwards without modifying their distribution substantially. This accounted for the greater tolerance of germination to reduced Ψounder fluctuating temperatures. To confirm that these effects were mediated by temperature fluctuationsper se, the behaviour ofC. acanthoidesandC. cardunculusincubated at the minimum, the mean and the maximum temperature of the fluctuation cycle was also analysed. Constant maximum and minimum temperatures of the cycle did not stimulate germination, nor did they shift Ψb(50) towards more negative values. The hydrotime model provides a physiologically based quantitative description for germination promotion due to fluctuating temperature.

Ecological aspects of seed dormancy loss

1998 ◽  
Vol 8 (2) ◽  
pp. 183-192 ◽  
Author(s):  
Phil S. Allen ◽  
Susan E. Meyer
Keyword(s):  
Water Potential ◽  
Seed Dormancy ◽  
Laboratory Data ◽  
Simulation Models ◽  
Base Temperature ◽  
Hydrothermal Time ◽  
Seed Biology ◽  
Seed Population ◽  
Germination Timing ◽  
Base Water Potential

AbstractAdvances in seed biology include progress in understanding the ecological significance of seed dormancy mechanisms. This knowledge is being used to make more accurate predictions of germination timing in the field. For several wild species whose seedlings establish in spring, seed populations show relevant variation that can be correlated with habitat conditions. Populations from severe winter sites, where the major risk to seedlings is frost, tend to have long chilling requirements or to germinate very slowly at low temperatures. Populations from warmer sites, where the major risk is drought, are non-dormant and germinate very rapidly under these same conditions. Seed populations from intermediate sites exhibit variation in dormancy levels, both among and within plants, which spreads germination across a considerable time period. For grasses that undergo dry after-ripening, seed dormancy loss can be successfully modelled using hydrothermal time. Dormancy loss for a seed population is associated with a progressive downward shift in the mean base water potential, i.e., the water potential below which half of the seeds will not germinate. Other parameters (hydrothermal time requirement, base temperature and standard deviation of base water potentials) tend to be constant through time. Simulation models for predicting dormancy loss in the field can be created by combining measurements of seed zone temperatures with equations that describe changes in mean base water potential as a function of temperature. Successful validation of these and other models demonstrates that equations based on laboratory data can be used to predict dormancy loss under widely fluctuating field conditions. Future progress may allow prediction of germination timing based on knowledge of intrinsic dormancy characteristics of a seed population and long-term weather patterns in the field.

Sign in / Sign up

Export Citation Format

Share Document