Changes in Alveolar Bone Height and Width Following Post-Extraction Ridge Augmentation Using a Fixed Bioabsorbable Membrane and Demineralized Freeze-Dried Bone Osteoinductive Graft

2003 ◽  
Vol 74 (7) ◽  
pp. 965-975 ◽  
Author(s):  
Gabriel Zubillaga ◽  
Stanley Von Hagen ◽  
Barry I. Simon ◽  
Michael J. Deasy
2017 ◽  
Vol 43 (4) ◽  
pp. 283-290 ◽  
Author(s):  
Tamir H Shalev ◽  
Gregori M Kurtzman ◽  
Alon H Shalev ◽  
Deborah K Johnson ◽  
Mark Elias M Kersten

Alveolar bone loss occurs after extraction with loss of a premolar or anterior tooth; the residual supporting alveolar bone loss averages 1.53 mm of crestal bone height and 3.87 mm of buccolingual width, with most of the bone loss occurring at the facial plate. Socket preservation does not completely preserve the original ridge contours but can be an effective means of reducing bone loss following extraction. Attempts to rebuild the alveolar ridge structure after tooth loss often employ the concept of guided bone regeneration, a technique-sensitive procedure that routinely involves placement of particulate bone with or without fixation screws and either a resorbable or a nonresorbable membrane. We present a novel technique for stabilizing a resorbable membrane and underlying particulate graft allowing for predictable bone grafting across multiple edentulous sites.


2018 ◽  
Vol 6 (3) ◽  
pp. 564-567
Author(s):  
Edvard Janev ◽  
Nadica Janeva ◽  
Marija Peeva-Petreska ◽  
Kristina Mitic

BACKGROUND: After tooth loss, however, severely atrophic residual alveolar ridges are fairly common, especially in patients who have been edentulous for a long period. Anterior area of the mandible is areas where clinicians have greater anatomical limitations. Reduced alveolar bone height very often represents a contraindication to implant therapy, unless a procedure such as a ridge augmentation is performed.CASE REPORT: This study aims to present two separate cases in highly selected edentulous anterior mandibular sites, where one stage, mini implants were used to support total prostheses. Small diameter implants have been used for retention of complete removable mandibular overdentures. This is an excellent option for those who suffer from the inconvenience and embarrassment of loose lower dentures and are tired of having to use sticky pastes and creams to make their dentures stay in place.CONCLUSION: Small diameter implants, when used multiples may offer adequate support for a removable prosthesis and overcome this problem.


2019 ◽  
Vol 5 (2) ◽  
pp. 75
Author(s):  
Beta Widya Oktiani ◽  
Sri Pramestri Lastianny ◽  
Ahmad Syaify

Guide tissue regeneration (GTR) is the treatment of infrabony pockets for soft and hard tissue regeneration. Membrane is used as a barrier and prevents apical migration of the cells in epithelial tissues. Membrane fixation is one of the procedures in GTR treatment because resorbed membrane is less stable. Simple sling suture technique for membrane fixation has 1 anchorage, located in coronal flap, while periosteal vertical mattress suture technique has 2 anchorages in periosteum, making it more stable. This study aimed to study the differences in the effectiveness of membrane fixation using periosteal vertical mattress suture and simple sling suture techniques in terms of probing depth, relative attachment loss, and alveolar bone height in the treatment of infrabony pockets. The samples were divided into 2 groups. The first group was open flap debridement (OFD) with demineralized freeze dried bone allograft (DFDBA) application and membrane fixation with simple sling suture, while the second group was OFD with DFDBA application and membrane fixation with periosteal vertical mattress suture, observed on day 0, 30th day, and 90th day. The results of the study showed significant differences in the probing depth and relative attachment loss (except from the 30th day to the 90th day), and there were no significant differences in the alveolar bone height from the baseline to the 90th day, between the group of membrane fixation using simple sling suture and that of periosteal vertical mattress suture techniques on flap surgery. This study concluded that membrane fixation in the treatment of infrabony pocket with periosteal vertical mattress suture technique is more effective in reducing the probing depth and relative attachment loss, but there is no difference in increasing the alveolar bone height when compared to simple sling suture technique.


2019 ◽  
Vol 1 (1) ◽  
pp. 29
Author(s):  
Netta Anggraini ◽  
Sri Pramestri Lastianny ◽  
Al Sri Koes Soesilowati

Treatment of infrabony pocket makes use of bone graft material demineralized freeze dried bone allograft (DFDBA) from different individuals which has undergone demineralization process and it is osteoinductive. Enhancement of growth factor was done by adding platelet rich fibrin (PRF) and platelet rich plasma (PRP). PRP is activated with an addition of calcium chloride CaCl2) to form gel. The method used to apply the bone grafting material is open flap debridement OFD). This research aimed to reveal the differences in the results of infrabony pocket treatment using PRF and PRP gel with an addition of DFDBA. The sample was taken from 20 infrabony pocket points divided into 2 groups, 10 infrabony pocket were treated with OFD+DFDBA+PRF and the other were treated with OFD+DFDBA+PRP gel. Pocket depth (PD) was measured on the baseline and the first and third month after treatment. Alveolar bone height was measured using cone beam computed tomography (CBCT) radiograph on the baseline to the third month after treatment. The results of this research showed that there was difference in the results of infrabony pocket treatment using PRF and PRP gel with an addition of DFDBA which could be observed from a reduction in PD from the baseline, month 1 and month 3 as well as reduction in alveolar bone height from the baseline to month 3. This research concluded that infrabony pocket treatment PRF application yields better results than PRP gel application in terms of PD and alveolar bone height reduction.


2020 ◽  
Vol 5 (3) ◽  
pp. 114
Author(s):  
Eka Pramudita Ramadhany ◽  
Al Sri Koes Soesilowati ◽  
Sri Pramestri Lastianny

Periodontitis is periodontal inflammation in response to plaque bacterial antigens, causing damage to periodontal ligament and alveolar bone resorption. Bone graft material combination i.e. demineralized freeze-dried bone allograft (DFDBA) and hydroxyapatite (HA) using sandwich bone augmentation (SBA) method will support each other and will be beneficial to be used as a scaffold. The body takes long time to resorb HA so this could complement DFDBA which is more easily dissolved. This study aimed to reveal the effect of bone graft addition using SBA method on the treatment of infrabony pocket with open flap debridement in terms of probing depth, relative attachment loss, alveolar bone height, and density. This study was carried out to 20 infrabony pockets, where 10 of them were treated using open flap debridement with HA addition, while the other 10 groups were treated using open flap debridement with DFDBA and HA using SBA method. Probing depth  and relative attachment loss were measured on days 0, 30 and 90. Bone height and density were measured using cone-beam computed tomography (images on day 0 and 90). The study showed that probing depth reduction on SBA group was greater than HA group. There were significant differences in probing depth and relative attachment loss examinations. However, bone height and bone density reduction did not show any significant difference. The conclusion from this study is open flap debridement using SBA method yields better regeneration in terms of probing depth and relative attachment loss than open flap debridement with HA addition. There is no difference in bone height and bone density between the two groups.


2000 ◽  
Vol 71 (11) ◽  
pp. 1774-1791 ◽  
Author(s):  
Barry I. Simon ◽  
Stanley Von Hagen ◽  
Michael J. Deasy ◽  
Mitesh Faldu ◽  
Dasha Resnansky

Author(s):  
Amir Moeintaghavi ◽  
Hamid Reza Arab ◽  
Leila Jabbareh ◽  
Farid Shiezadeh ◽  
Morteza Taheri ◽  
...  

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Craig E. Hofferber ◽  
J. Cameron Beck ◽  
Peter C. Liacouras ◽  
Jeffrey R. Wessel ◽  
Thu P. Getka

Abstract Background The purpose of this study was to evaluate the volumetric changes in partially edentulous alveolar ridges augmented with customized titanium ridge augmentation matrices (CTRAM), freeze-dried bone allograft, and a resorbable collagen membrane. Methods A pre-surgical cone beam computed tomography (CBCT) scan was obtained for CTRAM design/fabrication and to evaluate pre-surgical ridge dimensions. Ridge augmentation surgery using CTRAM, freeze-dried bone allograft, and a resorbable collagen membrane was performed at each deficient site. Clinical measurements of the area of augmentation were made at the time of CTRAM placement and re-entry, and a 2nd CBCT scan 7 months after graft placement was used for volumetric analysis. Locations of each CTRAM in situ were also compared to their planned positions. Re-entry surgery and implant placement was performed 8 months after CTRAM placement. Results Nine subjects were treated with CTRAM and freeze-dried bone allograft. Four out of the nine patients enrolled (44.4%) experienced premature CTRAM exposure during healing, and in two of these cases, CTRAM were removed early. Early exposure did not result in total graft failure in any case. Mean volumetric bone gain was 85.5 ± 30.9% of planned augmentation volume (61.3 ± 33.6% in subjects with premature CTRAM exposure vs. 104.9% for subjects without premature exposure, p = 0.03). Mean horizontal augmentation (measured clinically) was 3.02 mm, and vertical augmentation 2.86 mm. Mean surgical positional deviation of CTRAM from the planned location was 1.09 mm. Conclusion The use of CTRAM in conjunction with bone graft and a collagen membrane resulted in vertical and horizontal bone gain suitable for implant placement.


Author(s):  
Kai-Fang Hu ◽  
Ying-Chu Lin ◽  
Yu-Ting Huang ◽  
Yu-Hsiang Chou

Abstract Objectives The aim of this study was to assess whether alveolar ridge preservation (ARP) can reduce the need of ridge augmentation at posterior tooth sites. Material and methods This study enrolled patients who received dental implants at posterior tooth sites during 2013–2019. Demographic data and dental treatment histories were collected. Based on healing patterns after tooth extraction, patients were divided into ARP and spontaneous healing (SH) groups. Three surgical treatment plans were devised according to the alveolar bone volume on cone-beam computed tomography (CBCT). The three treatment plans were to perform implant alone, simultaneous guided bone regeneration (GBR) and implantation, and staged GBR before implantation. Statistical analyses were performed to determine relationships. Results There were 92 implant records in the ARP group and 249 implant records in the SH group. A significant intergroup difference was observed regarding the frequency distribution of the treatment modality of staged GBR before implant (χ2 = 15.07, p = 0.0005). Based on the implant alone treatment modality and simple logistic regression, the SH pattern was related to staged GBR before implant (SH vs. ARP: crude odds ratio (OR) = 4.65, 95% confidence interval (CI) = 2.15–11.61, p = 0.0003). After adjusting confounding factors, the risk was still significant (adjusted OR = 5.02, 95% CI = 2.26–12.85, p = 0.0002). Conclusions The study results suggested that ARP is more likely to lead to the treatment modality of implant alone and reduce the need for staged GBR before implantation. Clinical relevance This study describes ARP capable of minimizing the need for staged GBR before implantation and shortening the treatment duration.


Sign in / Sign up

Export Citation Format

Share Document