scholarly journals Possibilities of using stability lobe diagram for stability prediction of high speed milling of thin-walled details

2017 ◽  
Vol 1 (79) ◽  
pp. 41-48
Author(s):  
Yu. Vnukov ◽  
A. Germashev ◽  
V. Logominov ◽  
V. Kryshtal
Keyword(s):  
High Speed ◽  
Stability Prediction ◽  
Stability Lobe Diagram ◽  
High Speed Milling ◽  
Stability Lobe ◽  
Thin Walled

Dynamics and Stability of Milling Process Considering the Gyroscopic Effects

2009 ◽  
Vol 76-78 ◽  
pp. 624-629 ◽  
Author(s):  
Shan Shan Sun ◽  
W.X. Tang ◽  
H.F. Huang ◽  
Xi Qing Xu
Keyword(s):  
High Speed ◽  
Milling Process ◽  
Depth Of Cut ◽  
Stability Lobe Diagram ◽  
High Speed Milling ◽  
Stability Lobe ◽  
Ultra High Speed ◽  
Resonance Response ◽  
Critical Depth Of Cut ◽  
Gyroscopic Effects

A dynamics model is established considering gyroscopic effects due to high speed rotating spindle-tool system in ultra-high speed milling (USM). The proposed method for predicting stability enables a new 3D stability lobe diagram to be developed in the presence of gyroscopic effects, to cover all the intermediate stages of spindle speed. The influences of the gyroscopic effects on dynamics and stability in USM are analyzed. It is shown that the gyroscopic effects lower the resonance response frequencies of the spindle-tool system and the stable critical depth of cut in ultra-high speed milling.

Stability Prediction during Thin-Walled Workpiece High-Speed Milling

2009 ◽  
Vol 69-70 ◽  
pp. 428-432 ◽  
Author(s):  
Qing Hua Song ◽  
Yi Wan ◽  
Shui Qing Yu ◽  
Xing Ai ◽  
J.Y. Pang
Keyword(s):  
High Speed ◽  
Dynamic Properties ◽  
Removal Rate ◽  
Cutting Parameters ◽  
Milling Process ◽  
Machining Process ◽  
High Speed Milling ◽  
Thin Walled ◽  
Optimization Of Cutting Parameters ◽  
Free Material

A method for predicting the stability of thin-walled workpiece milling process is described. The proposed approach takes into account the dynamic characteristics of workpiece changing with tool positions. A dedicated thin-walled workpiece representative of a typical industrial application is designed and modeled by finite element method (FEM). The workpiece frequency response function (FRF) depending on tool positions is obtained. A specific 3D stability chart (SC) for different spindle speeds and different tool positions is then elaborated by scanning the dynamic properties of workpiece along the machined direction throughout the machining process. The dynamic optimization of cutting parameters for increasing the chatter free material removal rate and surface finish is presented through considering the chatter vibration and forced vibration. The investigations are compared and verified by high speed milling experiments with flexible workpiece.

Study on the Stability of High-Speed Milling of Thin-Walled Workpiece

2010 ◽  
Vol 97-101 ◽  
pp. 1849-1852
Author(s):  
Tong Yue Wang ◽  
Ning He ◽  
Liang Li
Keyword(s):  
Aluminum Alloy ◽  
Machine Tool ◽  
High Speed ◽  
Modal Parameters ◽  
Inertia Effect ◽  
Cutting Force Coefficients ◽  
High Speed Milling ◽  
Machining System ◽  
Thin Walled ◽  
The Stability

Thin-walled structure is easy to vibrate in machining. The dynamic milling model of thin-walled workpiece is analyzed based on the analysis of degrees in two perpendicular directions of machine tool-workpiece system. In high speed milling of 2A12 aluminum alloy, the compensation method based on the modification of inertia effect is proposed and accurate cutting force coefficients are obtained. The machining system is divided into “spindle-cutter” and “workpiece-fixture” two sub-systems and the modal parameters of two sub-systems are acquired via modal analysis experiments. Finally, the stability lobes for high speed milling of 2A12 thin-walled workpiece are obtained by the use of these parameters. The results are verified against cutting tests.

Selected 5-Axis Strategies for High-Speed Milling of Thin-Walled Parts

2013 ◽  
Vol 467 ◽  
pp. 466-469 ◽  
Author(s):  
Martin Kováč ◽  
Jozef Peterka
Keyword(s):  
High Speed ◽  
Machined Surface ◽  
High Speed Milling ◽  
Experimental Part ◽  
New Methods ◽  
Flexible Parts ◽  
Thin Walled ◽  
Five Axis ◽  
Five Axes

The article deals with the proposed 5-axis strategies of high-speed milling of thin-walled parts. I proposed three ways of material take-in. It is an advantage that by this milling the shaft of the tool is not in contact with the machined surface. Each tool contact with the machined surface leaves an unwanted track on the parts surface. Article present new methods for five axes high speed milling flexible parts. Experimental part was five axis high speed milling and measuring quality of surface. Results were evaluated by statistic methods by software Minitab.

Stability recognition for high-speed milling of TC4 thin-walled parts with curved surface

2017 ◽  
Vol 91 (5-8) ◽  
pp. 2819-2829 ◽  
Author(s):  
Jian-wei Ma ◽  
Zhen Liu ◽  
Zhen-yuan Jia ◽  
De-ning Song ◽  
Yuan-yuan Gao ◽  
...  
Keyword(s):  
High Speed ◽  
Curved Surface ◽  
High Speed Milling ◽  
Thin Walled
Sign in / Sign up

Export Citation Format

Share Document