scholarly journals What kind of sanitation should be applied to remove Brettanomyces bruxellensis biofilms?

Author(s):  
Manon Deluchat ◽  
Claire Lhomme ◽  
Claudine Degueurce ◽  
Virginie Serpaggi ◽  
Romain Lacroix ◽  
...  

The capacity for five Brettanomyces bruxellensis strains to form biofilm on stainless steel was confirmed, and the sanitation of these biofilms was tested using a solution of lactic acid and a reference method (a solution of foaming caustic soda and peroxide at 5 %). Different responses were observed depending on the strain: lactic acid solution induced a slight reduction in cell population, while the reference method resulted in the elimination of the adhered cells for three strains, but generated VBNC states for two others. The effects of sanitation on the biofilm formed is strain-dependent.

2020 ◽  
Author(s):  
Antonella Marchesi ◽  
Jessica Salva ◽  
Cecilia Aristimuño Ficoseco ◽  
Birgitt Wiese ◽  
Maria Elena Fatima Nader-Macias

Abstract Background: Lactobacilli are the predominant bacteria in the vaginal tract, and while they are present, can prevent infectious situations, being used as probiotics for the health of the tract. Phytoderivatives are used historically to prevent or maintain the health of the tract, and is possible to combine both bioactives for novel vaginal formulas. The aim of this work was to study the effect of phytoderivatives (individual or combined extracts) on the growth of homologous vaginal lactic acid bacteria and their compatibility, to go further in the design of a combined pharmabiotic formula for the prevention or treatment of urogenital tract infections.Methods: the effect of phytocompounds approved by Pharcopoeias was evaluated on the growth of beneficial lactic acid bacteria previously isolated from the vaginal tract. Statistical methods, as CART, were applied to determine the stimulatory or inhibitory effect of the vegetal sources on bacterial growth by applying different methodology. Compatibility between phyto and lactobacilli was determined, and the phenolic compounds contents quantified, to define the optimal conditions for the formula design. Results: The BVL strains showing highest growth values with most of the phytoderivatives under study were L. gasseri CRL 1361, L. ga. CRL 1509 and L. ga. CRL 1263, and L. jensenii CRL 1333 and L. jen. CRL 1317, indicating the behavior is strain-dependent, and vegetable-compound-affected. The most adequate phytoderivatives were: Carica, Centella, Plantago, Uva ursi*, Zarzaparrila*, Cola de caballo, Echinaceae, Ortiga and Palo Azul.Conclusions: The BVL strains showing optimal resistance to the phytocompounds and compatibility with them were L. gasseri CRL 1320, 1307, 1509, L. salivarius CRL 1296 and L. rhamnosus CRL 1332 combined with Uva ursi*, Zarzaparrilla* and Echinaceae that will be used for the design of optimal phytobiotic formulas.


2021 ◽  
pp. 174751982110210
Author(s):  
Xiaolong Xu ◽  
Lijuan Liu

Lactic acid is an important platform compound used as raw material for the production of lactide and polylactic acid. However, its concentration and composition distribution are not as simple as those of common compounds. In this work, the mass concentration distribution of highly concentrated lactic acid is determined by back titration. The components of highly concentrated lactic acid, crude lactide, and polymer after the reaction are analyzed by HPLC. Different concentrations of lactic acid solution were prepared for the synthesis of lactide and its content in the product was determined by 1H NMR analysis. We found that lactide is more easily produced from high-concentration lactic acid solution with which the condensed water is easier to release. Hence, the removal of condensed water is crucial to the formation of lactide, although it is not directly formed by esterification of two molecules of lactic acid.


Author(s):  
Alessandra Luchetti ◽  
Matteo Di Segni ◽  
Diego Andolina ◽  
Rossella Ventura ◽  
Marco Battaglia ◽  
...  

1991 ◽  
Vol 54 (1) ◽  
pp. 4-6 ◽  
Author(s):  
SHIN-HO LEE ◽  
JOSEPH F. FRANK

Inactivation by hypochlorite of Listeria monocytogenes cells adherent to stainless steel was determined. Adherent cell populations were prepared by incubating stainless steel slides with a 24 h culture of L. monocytogenes for 4 h at 21°C. Adherent microcolonies were prepared by growing L. monocytogenes on stainless steel slides submerged in a 1:15 dilution of tryptic soy broth at 21°C. The slides were then rinsed and transferred to fresh sterile broth every 2 d with a total incubation time of 8 d. Although the 4 h and 8 d adherent populations were at similar levels, 8 d adherent cells were over 100 times more resistant than the 4 h adherent cell population when exposed to 200 ppm hypochlorite for 30 s. When stainless steel slides containing adherent cells were heated at 72°C both adherent cell populations were inactivated after 1 min. Detectable numbers of L. monocytogenes remained on stainless steel slides after treatment at 65°C for 3 min when adherent 8 d cells were tested but not when adherent 4 h cells were used.


1999 ◽  
Vol 15 (6) ◽  
pp. 413-416 ◽  
Author(s):  
J.W. Nicholson ◽  
B.J. Millar ◽  
B. Czarnecka ◽  
H. Limanowska-Shaw

2013 ◽  
Vol 74 (5) ◽  
pp. 691-697 ◽  
Author(s):  
H. Luo ◽  
X.G. Li ◽  
C.F. Dong ◽  
K. Xiao ◽  
X.Q. Cheng

2021 ◽  
Vol 6 (2) ◽  
pp. 190
Author(s):  
Dewi Puspitasari ◽  
Nurah Tajjalia ◽  
Diana Wibowo ◽  
Agung Satria Wardhana

Background: Bioactive resin can release calcium ions when contact with solution media, even in acid condition. In the oral cavity, pH may change into acid condition due to the metabolic results of Streptococcus mutans. The bacteria metabolize carbohydrates into organic acids, one of which is lactic acid. Purpose: Analyze the effect of lactic acid solution and artificial saliva on the number of the release of calcium ions of bioactive resin. Methods: Forty-two specimens (diameter 15 mm x thickness 1 mm; n= 7/group fabricated with Activa™ Bioactive Restorative (Pulpdent). The specimens that meet the criteria were divided into 6 groups. The specimen was immersed for 1 and 7 days in the incubator at 37oC. The number of calcium ion release is measured using titration method. Results: Two Way Anova test and Post Hoc Bonferonni test showed there were significant differences among all group for lactic acid 1 day (4.040 ± 0.360) µg, artificial saliva 1 day (0.640 ± 0.338) µg, distilled water 1 day (1.040 ± 0.504) µg, lactic acid 7 days (5.400 ± 0.312), artificial saliva 7 days (1.640 ± 0.215) µg, distilled water 7 days (3.520± 0.356 µg). Conclusion: There was an influence of lactic acid and artificial saliva on the number of calcium ion releases of bioactive resin. Immersion of bioactive resin in the lactic acid solution increase the calcium ion releases and artificial saliva decrease the calcium ion release compared to distilled water. Keywords: artificial saliva, bioactive resin, calcium ion release, lactic acid


Sign in / Sign up

Export Citation Format

Share Document