scholarly journals Parameter Estimation of a Single-Phase Boost PFC Converter with EMI Filter based on an Optimization Algorithm

2021 ◽  
Author(s):  
Gabriel Rojas-Dueñas ◽  
Jordi-Roger Riba ◽  
Manuel Moreno-Eguilaz
Keyword(s):  
Steady State ◽  
Single Phase ◽  
Power Converters ◽  
Trust Region ◽  
Nonlinear Least Squares ◽  
Input Output ◽  
Transient Signals ◽  
Input And Output ◽  
Power Factor Corrector ◽  
Emi Filter

This paper proposes an approach to estimate the parameters of an AC-DC boost power factor corrector converter which includes an EMI filter. To this end, once the topology is known, measurements at the input and output terminals of the converter are done to identify the values of the passive elements. The proposed methodology is based on the trust-region nonlinear least squares algorithm to identify the parameters of the converter. The steady-state and the transient signals of the converter at the input/output terminals are acquired non-intrusively without any internal modification of the circuitry. The accuracy of the parameter identification carried out is determined by comparing the estimated values with the actual values provided by the manufacturer, and by contrasting the measured signals with the ones obtained with a simulation model with the estimated values of the parameters. The results presented in this paper prove the accuracy of the proposed approach, which can be extended to other power converters and filters.

scholarly journals Parameter Identification of DC-DC Converters under Steady-State and Transient Conditions Based on White-Box Models

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 393 ◽  
Author(s):  
Jordi-Roger Riba ◽  
Manuel Moreno-Eguilaz ◽  
Santiago Bogarra ◽  
Antoni Garcia
Keyword(s):  
Experimental Data ◽  
Steady State ◽  
Transfer Function ◽  
Power Converters ◽  
Electronic Devices ◽  
Passive Components ◽  
Transient Conditions ◽  
Input And Output ◽  
Box Models ◽  
Switch Mode

This paper proposes a white-box approach for identifying the parameters of DC-DC buck and boost switch mode power converters. It is based on discretizing the differential equations that describe the dynamic behavior of the converters. From the discretized equations and experimental data, the parameters of the converters are identified, thus obtaining both the values of the passive components and the transfer function coefficients of the controller. To this end, steady state and transient experimental signals are analyzed, including the input and output voltages and the inductor and output currents. To determine the accuracy of the proposed method, once the parameters are identified, a simulation with the identified parameters of the converter is run and compared with experimental signals. Such results show the accuracy and feasibility of the approach proposed in this work, which can be extended to other converters and electrical and electronic devices.

A Sobolev gradient method for treating the steady-state incompressible Navier-Stokes equations

2013 ◽  
Vol 11 (4) ◽  
Author(s):  
Robert Renka
Keyword(s):  
Steady State ◽  
Stokes Equations ◽  
Numerical Test ◽  
Trust Region Method ◽  
Trust Region ◽  
Nonlinear Least Squares ◽  
Two Dimensions ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Element Discretization

AbstractThe velocity-vorticity-pressure formulation of the steady-state incompressible Navier-Stokes equations in two dimensions is cast as a nonlinear least squares problem in which the functional is a weighted sum of squared residuals. A finite element discretization of the functional is minimized by a trust-region method in which the trustregion radius is defined by a Sobolev norm and the trust-region subproblems are solved by a dogleg method. Numerical test results show the method to be effective.

Method for Evaluating Insertion Loss of EMI Filter Connected to Semiconductor Power Converters

2012 ◽  
Vol 132 (7) ◽  
pp. 727-735 ◽  
Author(s):  
Michio Tamate ◽  
Tamiko Sasaki ◽  
Akio Toba ◽  
Yasushi Matsumoto ◽  
Keiji Wada ◽  
...  
Keyword(s):  
Insertion Loss ◽  
Power Converters ◽  
Emi Filter

Validation of SAS4A/SASSYS-1 for predicting steady-state single-phase natural circulation

2021 ◽  
Vol 377 ◽  
pp. 111149
Author(s):  
Taiyang Zhang ◽  
Erik R. Smith ◽  
Caleb S. Brooks ◽  
Thomas H. Fanning
Keyword(s):  
Steady State ◽  
Single Phase ◽  
Natural Circulation

scholarly journals Recessive Transition Mechanism of Arable Land Use Based on the Perspective of Coupling Coordination of Input–Output: A Case Study of 31 Provinces in China

Land ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 41
Author(s):  
Yi Lou ◽  
Guanyi Yin ◽  
Yue Xin ◽  
Shuai Xie ◽  
Guanghao Li ◽  
...  
Keyword(s):  
Land Use ◽  
Evaluation Model ◽  
Arable Land ◽  
Temporal Trends ◽  
Mainland China ◽  
Input Output ◽  
Transition Mechanism ◽  
Input And Output ◽  
Spatio Temporal ◽  
Arable Land Use

In the rapid process of urbanization in China, arable land resources are faced with dual challenges in terms of quantity and quality. Starting with the change in the coupling coordination relationship between the input and output on arable land, this study applies an evaluation model of the degree of coupling coordination between the input and output (D_CCIO) on arable land and deeply analyzes the recessive transition mechanism and internal differences in arable land use modes in 31 provinces on mainland China. The results show that the total amount and the amount per unit area of the input and output on arable land in China have presented different spatio-temporal trends, along with the mismatched movement of the spatial barycenter. Although the D_CCIO on arable land increases slowly as a whole, 31 provinces show different recessive transition mechanisms of arable land use, which is hidden in the internal changes in the input–output structure. The results of this study highlight the different recessive transition patterns of arable land use in different provinces of China, which points to the outlook for higher technical input, optimized planting structure, and the coordination of human-land relationships.

Improved Load Sharing Control Techniques for Inverters used in a Microgrid

2009 ◽  
Vol 10 (1) ◽  
Author(s):  
Wei Yao ◽  
Zhaoming Qian
Keyword(s):  
Steady State ◽  
Transient Response ◽  
Single Phase ◽  
Load Sharing ◽  
Power Sharing ◽  
Experimental Results ◽  
Control Technique ◽  
Transient Performance ◽  
Control Techniques ◽  
Control Scheme

In this paper, an improved load sharing control scheme is presented, which is able to improve the transient response and power sharing accuracy of parallel-connected inverters used in microgrid. It also shows how the improved droop method can be easily adapted to account for the operation of parallel-connected inverters, providing good performance under the variation and disturbance of loads, as well as achieving good steady-state objectives and transient performance. Two DSP-based single-phase Microgrid inverters are designed and implemented. Simulation and experimental results are all reported, confirming the validity of the proposed control technique.

Sign in / Sign up

Export Citation Format

Share Document