Full-Scale Experiment of Earthquake Resistant Embankment Using Flexible Container Bag

2020 ◽  
Vol 15 (6) ◽  
pp. 765-781
Author(s):  
Hiroshi Nakazawa ◽  
Yohsuke Kawamata ◽  
Satoru Shibuya ◽  
Shoji Kato ◽  
Kyung-Beom Jeong ◽  
...  

There exists many road embankments in Japan which are not earthquake resistant. For example, a road embankment collapsed at Okuradani IC in Hyogo Prefecture during the Great Hanshin-Awaji Earthquake of 1995. In 2009, a road embankment along the Tomei Expressway collapsed during an earthquake with epicenter in Suruga Bay. Road failure makes relief activity and transportation of goods difficult, causing social damage. Furthermore, recovery of damaged embankments takes much time and cost. Accordingly, it is important to conduct research on methods of construction which would help build embankments inexpensively and swiftly. Against this background, a full-scale experiment was conducted at E-Defense to confirm the validity of a method of construction that uses flexible container bag to pack soil for quick embankment recovery. Generally, flexible container bags are easy to handle, and ensure and maintain the earthquake resistance performance of embankments after the completion of recovery work, taking the longer life time of the reinforced structure into consideration. In the experiment, two kinds of reinforced structures with flexible container bags stacked differently were placed at either toe of the slope of an embankment of height 4 m, and shake tests were performed three times to compare the effectiveness of both reinforced structures. For both kinds of structures, the flexible container bags were stacked in two tiers and compressed from top and bottom using compression plates to make the structures rigid. One of the structures was one-tier type where the flexible container bags were stacked in series and the other was two-tier type where the flexible container bags were stacked along the side of the embankment. In the case with the target acceleration of sine wave of 376 Gal, crack occurred on the reinforced structure of one-tier type, but the embankment collapsed a little near the top of the slope. There was little displacement in both reinforced structures, hence, it is judged that the deformation would not impair the functionality of the road. As for the seismic performance, it can be said that the two-tier type would be slightly superior to one-tier type, however, this assumption cannot be evaluated decisively under the present circumstances. For practical use in future, form, size, workability, and economy of embankment should be examined for designing and construction which takes the specification of the structure into consideration.

2020 ◽  
Vol 177 ◽  
pp. 04003
Author(s):  
Sergey Prostov ◽  
Evgeniy Shabanov

This article presents the main results of the study of electrophysical processes occurring in the zone of electrical processing during the cleaning of soils from oil pollution. The main conclusions are formulated about the processes occurring in the electric processing zone by changing the relative electrical resistance of the soil, which was measured using microprobe sensors. A comparative analysis of the results of a laboratory experiment on the electrochemical cleaning of contaminated soil in a tank is carried out with the results of a full-scale experiment conducted on a plot of a soil mass in real conditions, but artificially contaminated with oil products (gasoline, used oil. Using single measurements of electrical resistivity by microprobe sensors, the spread of the pollutant in the soil was clarified , the relationship between the physical properties of the array and its electrical wire is established conductive properties. Confirmed high efficiency of this type of control in the study of complex processes occurring in the contaminated ground array.


2001 ◽  
Vol 251 (1-2) ◽  
pp. 29-48 ◽  
Author(s):  
S.T.S. Yuen ◽  
Q.J. Wang ◽  
J.R. Styles ◽  
T.A. McMahon

Author(s):  
Tania Ávila-Esquivel ◽  
José Pablo Aguiar-Moya ◽  
Edgar Camacho-Garita ◽  
Luis Loría-Salazar

2018 ◽  
Vol 196 ◽  
pp. 04026
Author(s):  
Sergey Sannikov ◽  
Sergey Kuyukov ◽  
Alexey Zamyatin ◽  
Alexandr Zhigailov

The paper presents a complex method for increasing water resistance and reducing crack formation by using a prefabricated foundation of soil-cement slabs with surface processing with a hydrophobizing material on basis of organosilicon compounds. Theoretical, laboratory and full-scale experimental studies were made. Theoretical studies are based on the substantiation of the geometric parameters of the slab in order to exclude the probability of its destruction under its own weight during building and installation works. The result of the first stage of laboratory studies is the determination of the optimum composition of soil-cement mixture in order to achieve a grade of strength M20. At the second stage, the effectiveness of the influence of hydrophobizing materials "Tiprom U" and "Penetron-Admix" on water absorption and compressive strength of soil-cement was determined. The final stage of the research was a full-scale experiment. In the factory environment, soil-cement slabs were manufactured in metal forms. Based on the results of the research, conclusions about the effectiveness of this complex method were made. The use of soil-cement slabs allows reducing crack formation, as well as to work all year round due to manufacturing and surface treatment of slabs in the factory conditions.


Sign in / Sign up

Export Citation Format

Share Document