scholarly journals Long-distance Localization of 4Cr13 Stainless Ball-pocket in Radiative Region

2021 ◽  
Author(s):  
he huayan ◽  
wang guangyuan
Keyword(s):  
Mechanical Properties ◽  
High Sensitivity ◽  
High Energy ◽  
Chromium Alloy ◽  
Long Distance ◽  
Machining Error ◽  
Intelligent Robots ◽  
Speed Up ◽  
High Energy Particles ◽  
Bearing Ball

Abstract Radiation caused by high-energy particles would speed up the damage of accelerator equipment. The high residual radiation from equipment affects staff health as well. Intelligent robots receive various limits to replace human in completing complex and time-consuming maintenance in radiative region because of high sensitivity to radiation. The 4Cr13 stainless ball-pocket was designed in the study of localization in long distance with the advantages of the conical fit technology. Moreover, the 4Cr13 stainless ball-pocket and bearing ball combine and form a locating structure, which has good performance on automatic aligning, self-locking and rapid dismantling. The comprehensive mechanical properties of 4Cr13 stainless ball-pocket were studied and optimized based on three heat treatment methods of martensite steel containing chromium alloy. The study of machining conditions states that compared with the design accuracy of localization, the machining error retains definite allowance. The 4Cr13 stainless ball-pocket successfully exhibits sufficient supporting strength, wearing reducing and radiation resistance. This study shows that 4Cr13 stainless ball-pocket has better fitting precision than 0.2 mm in practice. This study could offer a reliable strategy and measure for long-distance localization in other dangerous regions.

High-sensitivity STEP-F spectrometer-telescope for high-energy particles of the CORONAS-PHOTON satellite experiment

2011 ◽  
Vol 45 (3) ◽  
pp. 212-220 ◽  
Author(s):  
A. V. Dudnik ◽  
V. K. Persikov ◽  
I. I. Zalyubovsky ◽  
T. G. Timakova ◽  
E. V. Kurbatov ◽  
...  
Keyword(s):  
High Sensitivity ◽  
High Energy ◽  
Satellite Experiment ◽  
High Energy Particles

Observation of surface morphology by reflection electron holography

1989 ◽  
Vol 47 ◽  
pp. 536-537
Author(s):  
N. Osakabe ◽  
J. Endo ◽  
T. Matsuda ◽  
A. Tonomura
Keyword(s):  
Phase Shift ◽  
Surface Morphology ◽  
High Sensitivity ◽  
High Energy ◽  
Path Difference ◽  
Transmission Mode ◽  
Electron Holography ◽  
Dynamical Process ◽  
High Vertical Resolution ◽  
Amplification Technique

Progress in microscopy such as STM and TEM-TED has revealed surface structures in atomic dimension. REM has been used for the observation of surface dynamical process and surface morphology. Recently developed reflection electron holography, which employes REM optics to measure the phase shift of reflected electron, has been proved to be effective for the observation of surface morphology in high vertical resolution ≃ 0.01 Å.The key to the high sensitivity of the method is best shown by comparing the phase shift generation by surface topography with that in transmission mode. Difference in refractive index between vacuum and material Vo/2E≃10-4 owes the phase shift in transmission mode as shownn Fig. 1( a). While geometrical path difference is created in reflection mode( Fig. 1(b) ), which is measured interferometrically using high energy electron beam of wavelength ≃0.01 Å. Together with the phase amplification technique , the vertivcal resolution is expected to be ≤0.01 Å in an ideal case.

Observation of High-Energy Particles in the Inner Radiation Belt by the HEP Instrument of the Arase Satellite

2020 ◽  
Vol 18 (6) ◽  
pp. 398-403
Author(s):  
Honoka TODA ◽  
Wataru MIYAKE ◽  
Takefumi MITANI ◽  
Takeshi TAKASHIMA ◽  
Yoshizumi MIYOSHI ◽  
...  
Keyword(s):  
Radiation Belt ◽  
High Energy ◽  
High Energy Particles

HAYNES ALLOY 75

Alloy Digest ◽  
1999 ◽  
Vol 48 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Heat Treating ◽  
Turbine Engines ◽  
Chromium Alloy ◽  
Gas Turbine Engines ◽  
Typical Application ◽  
Good Oxidation Resistance ◽  
Temperature Performance ◽  
Haynes Alloy

Abstract Haynes alloy 75 is an 80 nickel-20 chromium alloy with both good oxidation resistance and good mechanical properties at high temperatures. It is amenable to all forms of fabrication and welding. A typical application for sheet metal is fabrications in gas turbine engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Ni-557. Producer or source: Haynes International Inc.

SANICRO 31

Alloy Digest ◽  
1965 ◽  
Vol 14 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Petrochemical Industry ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Iron Nickel ◽  
Corrosion And Oxidation

Abstract SANDVIK SANICRO 31 is an iron-nickel-chromium alloy having good resistance to corrosion and oxidation and good mechanical properties at elevated temperatures. It is recommended for electrical sheathing, pyrometer tubes, equipment for heat treating and furnace tubes and other equipment in the petrochemical industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-172. Producer or source: Sandvik.

Impact of the SiC addition on the morphological, structural and mechanical properties of Cu-SiC composite powders prepared by high energy milling

2021 ◽  
Author(s):  
Nailton T. Câmara ◽  
Rafael A. Raimundo ◽  
Cleber S. Lourenço ◽  
Luís M.F. Morais ◽  
David D.S. Silva ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Energy ◽  
Composite Powders ◽  
High Energy Milling
Sign in / Sign up

Export Citation Format

Share Document