Measurement of ionization loss of 50 GeV protons in silicon with smoothly tunable up to 1 cm thickness using a single flat detector

Research of the ionization loss of 50 GeV protons, the path of which in the depleted layer of the silicon detector was smoothly regulated in the range from 0.3 to 10 mm, is presented. In the experiment, we used a flat silicon detector with a fixed thickness of the depleted layer of 300 μm. The smooth regulation of the path was realized due to the variation of the angle between the surface of the detector and the incident proton beam. The comparison of experimental data and theoretical calculations of the ionization loss demonstrates agreement in all range of thicknesses. Results of the research can be used in order to control the angle between the surface of the detector and the incident beam of relativistic particles. Besides, the results can be used in the analysis of data from astrophysical silicon detectors of charged particles if high-energy particles crossed flat detectors at arbitrary angle.

Long-distance Localization of 4Cr13 Stainless Ball-pocket in Radiative Region

Radiation caused by high-energy particles would speed up the damage of accelerator equipment. The high residual radiation from equipment affects staff health as well. Intelligent robots receive various limits to replace human in completing complex and time-consuming maintenance in radiative region because of high sensitivity to radiation. The 4Cr13 stainless ball-pocket was designed in the study of localization in long distance with the advantages of the conical fit technology. Moreover, the 4Cr13 stainless ball-pocket and bearing ball combine and form a locating structure, which has good performance on automatic aligning, self-locking and rapid dismantling. The comprehensive mechanical properties of 4Cr13 stainless ball-pocket were studied and optimized based on three heat treatment methods of martensite steel containing chromium alloy. The study of machining conditions states that compared with the design accuracy of localization, the machining error retains definite allowance. The 4Cr13 stainless ball-pocket successfully exhibits sufficient supporting strength, wearing reducing and radiation resistance. This study shows that 4Cr13 stainless ball-pocket has better fitting precision than 0.2 mm in practice. This study could offer a reliable strategy and measure for long-distance localization in other dangerous regions.

Interaction between long-period ULF waves and charged particle in the magnetosphere: theory and observations (overview)

The paper reviews the current state of the problem of interaction between long-period ultra-low-frequency (ULF) waves and high-energy particles. We consider elements of the theory of energy exchange between waves and particles, particle transport across magnetic shells under the influence of the electromagnetic field of a wave, the acceleration of radiation belt particles by both resonant and non-resonant mechanisms. We examine the mechanisms of generation of azimuthally-small-scale ULF waves due to instabilities arising from the wave–particle resonance. The cases of Alfvén, drift-compressional, and drift-mirror waves are analyzed. It is noted that due to the lack of a detailed theory of drift-mirror modes, the possibility of their existence in the magnetosphere cannot be taken as a proven fact. We summarize experimental data on the poloidal and compression ULF waves generated by unstable populations of high-energy particles. We investigate the mechanisms of modulation of energetic particle fluxes by ULF waves and possible observational manifestations of such modulation. Methods of studying the structure of waves across magnetic shells by recording fluxes of resonant particles with a finite Larmor radius are discussed.

Interaction between long-period ULF waves and charged particle in the magnetosphere: theory and observations (overview)

The paper reviews the current state of the problem of interaction between long-period ultra-low-frequency (ULF) waves and high-energy particles. We consider elements of the theory of energy exchange between waves and particles, particle transport across magnetic shells under the influence of the electromagnetic field of a wave, the acceleration of radiation belt particles by both resonant and non-resonant mechanisms. We examine the mechanisms of generation of azimuthally-small-scale ULF waves due to instabilities arising from the wave–particle resonance. The cases of Alfvén, drift-compressional, and drift-mirror waves are analyzed. It is noted that due to the lack of a detailed theory of drift-mirror modes, the possibility of their existence in the magnetosphere cannot be taken as a proven fact. We summarize experimental data on the poloidal and compression ULF waves generated by unstable populations of high-energy particles. We investigate the mechanisms of modulation of energetic particle fluxes by ULF waves and possible observational manifestations of such modulation. Methods of studying the structure of waves across magnetic shells by recording fluxes of resonant particles with a finite Larmor radius are discussed.

Molecular Dynamics Simulation of Cracking Process of Bisphenol F Epoxy Resin under High-Energy Particle Impact

The current lead insulation of high-temperature superconductivity equipment is under the combined action of large temperature gradient field and strong electric field. Compared with a uniform temperature field, its electric field distortion is more serious, and it is easy to induce surface discharge to generate high-energy particles, destroy the insulation surface structure and accelerate insulation degradation. In this paper, the degradation reaction process of bisphenol F epoxy resin under the impact of high-energy particles, such as O3−, HO–, H3O+ and NO+, is calculated based on ReaxFF simulation. According to the different types of high-energy particles under different voltage polarities, the micro-degradation mechanism, pyrolysis degree and pyrolysis products of epoxy resin are analyzed. The results show that in addition to the chemical reaction of high-energy particles with epoxy resin, their kinetic energy will also destroy the molecular structure of the material, causing the cross-linked epoxy resin to pyrolyze, and the impact of positive particles has a more obvious impact on the pyrolysis of epoxy resin.

Radiation-Induced Phenomena in Wide-Gap Laser Materials Used in High-Radiation Areas

The analysis of the surface states in experimental reflection spectra is carried out peculiarities of the formation of defects of the electronic structure of irradiation corundum crystals is considered. It is shown that change of crystals reflectional ability is related to radiative growth forced by aluminum ions. The processes of radiative growth depend on the type and energy of irradiating high-energy particles. Kinetic of that growth is presented, which relates the intensity of zones with free aluminum ions to the concentration of such zones in near-surface layer.

Shielding of Cosmic Radiation by Fibrous Materials

Cosmic radiation belongs to the challenges engineers have to deal with when further developing space travel. Besides the severe risks for humans due to high-energy particles or waves, the impact of cosmic radiation on electronics and diverse materials cannot be neglected, even in microsatellites or other unmanned spacecraft. Here, we explain the different particles or waves found in cosmic radiation and their potential impact on biological and inanimate matter. We give an overview of fiber-based shielding materials, mostly applied in the form of composites, and explain why these materials can help shielding spaceships or satellites from cosmic radiation.

Modeling of High-Energy Particles and Radiation Production for Multipetawatt Laser Facilities

The advent of high-energy short-pulse laser beams poses new problems related to radiation protection. The radiation generated in experiments using multipetawatt laser systems leads to prompt doses and potentially to the activation of the materials within the interaction chamber and the experimental hall. Despite many new PW laser facilities are nowadays entering into operation, this question has received little attention until now. In this paper, we evaluate the radiological effects induced by the operation of a high-power laser facility. Two working regimes are considered related to the production of hard X-rays and energetic protons. The methodology is general and may be applied for the design of experiments with any high-power laser systems.