scholarly journals How Harvest More Ambient Energy from Environmental Vibration with a Multiple-Frequency Excitation

2021 ◽  
Author(s):  
Jiawen Song ◽  
Guihong Sun ◽  
Xin Zeng ◽  
Xiangwen Li ◽  
Quan Bai ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Splitting Method ◽  
Test Method ◽  
Multiple Frequency ◽  
Piezoelectric Energy ◽  
Environmental Vibration ◽  
Frequency Excitation ◽  
Harvesting Efficiency ◽  
Energy Harvesting Efficiency

Abstract We propose piezoelectric energy harvester (PEH) with double-cantilever-beam (DCB) undergoing coupled bending-torsion vibrations by combining width-splitting method and asymmetric mass, in order that more ambient energy could be harvested from environmental vibration with multiple-frequency excitation. The geometrical dimensions are optimized for PEHDCB, when the maximum of output peak voltages Up−max and resonance frequency difference (Δf0) between the first and second modes are chosen as optimization objectives based on orthogonal test method. The energy harvesting efficiency is evaluated by the proportion of half-power bandwidth and quality factor, and the experimental and simulation results are compared to verify reliability. The Up−max1 and Pp−max1 are increased 25.2% and 57.3% for PEHDCB under the multi-frequency excitation, when the split-width method is applied into PEH with single-cantilever-beam (SCB) undergoing coupled bending-torsion vibrations. The deviations of Up−max1 and f0 are at the ranges of 4.9–14.2% and 2.2–2.5% for PEHDCB under the different mass ratios, and the measurement reliability is acceptable considering incomplete clamping, damping and inevitable assembly effects. The energy harvesting efficiency of PEHDCB presented is much higher than that of the conventional PEHSCB from environmental vibration with multiple-frequency excitation.

scholarly journals Piezoelectric energy harvester with double cantilever beam undergoing coupled bending-torsion vibrations by width-splitting method

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Jiawen Song ◽  
Guihong Sun ◽  
Xin Zeng ◽  
Xiangwen Li ◽  
Quan Bai ◽  
...  
Keyword(s):  
Cantilever Beam ◽  
Energy Harvester ◽  
Double Cantilever Beam ◽  
Splitting Method ◽  
Multiple Frequency ◽  
Piezoelectric Energy ◽  
Environmental Vibration ◽  
Frequency Excitation ◽  
Harvesting Efficiency ◽  
Energy Harvesting Efficiency

AbstractWe propose piezoelectric energy harvester (PEH) with double-cantilever-beam (DCB) undergoing coupled bending-torsion vibrations by combining width-splitting method and asymmetric mass, in order that more ambient energy could be harvested from environmental vibration with multiple-frequency excitation. The geometrical dimensions are optimized for PEHDCB, when the maximum of output peak voltages Up-max and resonance frequency difference (Δf0) between the first and second modes are chosen as optimization objectives based on orthogonal test method. The energy harvesting efficiency is evaluated by the proportion of half-power bandwidth and quality factor, and the experimental and simulation results are compared to verify reliability. The Up-max1 and Pp-max1 are increased 25.2% and 57.3% for PEHDCB under the multi-frequency excitation, when the split-width method is applied into PEH with single-cantilever-beam (SCB) undergoing coupled bending-torsion vibrations. The deviations of Up-max1 and f0 are at the ranges of 4.9–14.2% and 2.2–2.5% for PEHDCB under the different mass ratios, and the measurement reliability is acceptable considering incomplete clamping, damping and inevitable assembly effects. The energy harvesting efficiency of PEHDCB presented is much higher than that of the conventional PEHSCB from environmental vibration with multiple-frequency excitation.

scholarly journals Modeling and Efficiency Analysis of a Piezoelectric Energy Harvester Based on the Flow Induced Vibration of a Piezoelectric Composite Pipe

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4277 ◽  
Author(s):  
Maoying Zhou ◽  
Mohannad Al-Furjan ◽  
Ban Wang
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Fluid Structure Interaction ◽  
Piezoelectric Composite ◽  
Flow Induced Vibration ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Piezoelectric Energy ◽  
Harvesting Efficiency ◽  
Energy Harvesting Efficiency

This paper proposes and investigates a piezoelectric energy harvesting system based on the flow induced vibration of a piezoelectric composite cantilever pipe. Dynamic equations for the proposed energy harvester are derived considering the fluid-structure interaction and piezoelectric coupling vibration. Linear global stability analysis of the fluid-solid-electric coupled system is done using the numerical continuation method to find the neutrally stable vibration mode of the system. A measure of the energy harvesting efficiency of the system is proposed and analyzed. A series of simulations are conducted to throw light upon the influences of mass ratio, dimensionless electromechanical coupling, and dimensionless connected resistance upon the critical reduced velocity and the normalized energy harvesting efficiency. The results provide useful guidelines for the practical design of piezoelectric energy harvester based on fluid structure interaction and indicate some future topics to be investigated to optimize the device performance.

A Piezoelectric Energy Harvesting Damper for Low-Frequency Application

2015 ◽  
Author(s):  
Arata Masuda ◽  
Yasuhiro Hiraki ◽  
Naoto Ikeda ◽  
Akira Sone
Keyword(s):  
Energy Harvesting ◽  
High Efficiency ◽  
Electric Energy ◽  
Low Frequency ◽  
Offshore Structures ◽  
Piezoelectric Energy ◽  
Piezoelectric Cantilever ◽  
Work Input ◽  
Harvesting Efficiency ◽  
Energy Harvesting Efficiency

In this study, a design of an energy harvesting damper for low-frequency applications, such as energy harvesting from long period infrastructures, tanks and pipings, and maritime and offshore structures, is presented. In this design, the low-frequency relative motion of the damper is transformed into a high-frequency motion of a piezoelectric cantilever beam by a mechanical switching mechanism, referred to as “plucking” mechanism that couples and decouples the cantilever to the damper rod so that the input energy into the damper is converted to electric energy with high efficiency. In this paper, the energy harvesting efficiency is theoretically calculated for the harvesters with and without plucking mechanism and the optimized maximum performance is derived. Then the electrical switching circuit for the enhancement of the electromechanical conversion efficiency, referred to as “SSHI” interface is introduced. Numerical case studies suggest that the harvester with an ideally implemented parallel SSHI circuit can retrieve over 70 % energy of the maximum mechanical work input on the damper rod.

scholarly journals Size-dependent piezoelectric and mechanical properties of electrospun P(VDF-TrFE) nanofibers for enhanced energy harvesting

2016 ◽  
Vol 4 (6) ◽  
pp. 2293-2304 ◽  
Author(s):  
Gerardo Ico ◽  
Adam Showalter ◽  
Wayne Bosze ◽  
Shannon C. Gott ◽  
Bum Sung Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Harvesting ◽  
Dimensional Reduction ◽  
Piezoelectric Coefficient ◽  
Piezoelectric Energy Harvesting ◽  
Phase Content ◽  
Size Dependent ◽  
Piezoelectric Energy ◽  
Harvesting Efficiency ◽  
Energy Harvesting Efficiency

Dimensional reduction of electrospun P(VDF-TrFE) increases crystallinity (DOC), electroactive phase content (EA), Young’s modulus (E) and piezoelectric coefficient (d33), collectively leading to enhanced piezoelectric energy harvesting efficiency.

scholarly journals Wake-foil interactions and energy harvesting efficiency in tandem oscillating foils

2021 ◽  
Vol 6 (7) ◽  
Author(s):  
Bernardo Luiz R. Ribeiro ◽  
Yunxing Su ◽  
Quentin Guillaumin ◽  
Kenneth S. Breuer ◽  
Jennifer A. Franck
Keyword(s):  
Energy Harvesting ◽  
Harvesting Efficiency ◽  
Energy Harvesting Efficiency ◽  
Oscillating Foils

A Creative Vibration Energy Harvesting System to Support a Self-Powered Internet of Thing (IoT) Network in Smart Bridge Monitoring

2020 ◽  
Author(s):  
Saman Farhangdoust ◽  
Claudia Mederos ◽  
Behrouz Farkiani ◽  
Armin Mehrabi ◽  
Hossein Taheri ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Average Power ◽  
Electrical Energy ◽  
Laser Vibrometer ◽  
Stay Cable ◽  
Fe Modelling ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
Energy Harvesting System

Abstract This paper presents a creative energy harvesting system using a bimorph piezoelectric cantilever-beam to power wireless sensors in an IoT network for the Sunshine Skyway Bridge. The bimorph piezoelectric energy harvester (BPEH) comprises a cantilever beam as a substrate sandwiched between two piezoelectric layers to remarkably harness ambient vibrations of an inclined stay cable and convert them into electrical energy when the cable is subjected to a harmonic acceleration. To investigate and design the bridge energy harvesting system, a field measurement was required for collecting cable vibration data. The results of a non-contact laser vibrometer is used to remotely measure the dynamic characteristics of the inclined cables. A finite element study is employed to simulate a 3-D model of the proposed BPEH by COMSOL Multiphasics. The FE modelling results showed that the average power generated by the BPEH excited by a harmonic acceleration of 1 m/s2 at 1 Hz is up to 614 μW which satisfies the minimum electric power required for the sensor node in the proposed IoT network. In this research a LoRaWAN architecture is also developed to utilize the BPEH as a sustainable and sufficient power resource for an IoT platform which uses wireless sensor networks installed on the bridge stay cables to collect and remotely transfer bridge health monitoring data over the bridge in a low-power manner.

Multimodal Energy Harvesting System: Piezoelectric and Electromagnetic

2008 ◽  
Vol 20 (5) ◽  
pp. 625-632 ◽  
Author(s):  
Yonas Tadesse ◽  
Shujun Zhang ◽  
Shashank Priya
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Permanent Magnet ◽  
Cantilever Beam ◽  
Piezoelectric Energy Harvesting ◽  
Prototype System ◽  
Finite Element Software ◽  
Piezoelectric Energy ◽  
Energy Harvesting System ◽  
Tip Mass

In this study, we report a multimodal energy harvesting device that combines electromagnetic and piezoelectric energy harvesting mechanism. The device consists of piezoelectric crystals bonded to a cantilever beam. The tip of the cantilever beam has an attached permanent magnet which, oscillates within a stationary coil fixed to the top of the package. The permanent magnet serves two purpose (i) acts as a tip mass for the cantilever beam and lowers the resonance frequency, and (ii) acts as a core which oscillates between the inductive coils resulting in electric current generation through Faraday's effect. Thus, this design combines the energy harvesting from two different mechanisms, piezoelectric and electromagnetic, on the same platform. The prototype system was optimized using the finite element software, ANSYS, to find the resonance frequency and stress distribution. The power generated from the fabricated prototype was found to be 0.25 W using the electromagnetic mechanism and 0.25 mW using the piezoelectric mechanism at 35 g acceleration and 20 Hz frequency.

Hybrid-Bistable Vibration Energy Harvester With Adaptive Potential Well

2018 ◽  
Author(s):  
Jinki Kim ◽  
Patrick Dorin ◽  
K. W. Wang
Keyword(s):  
Energy Harvesting ◽  
Potential Energy ◽  
Cantilever Beam ◽  
Potential Barrier ◽  
Energy Barrier ◽  
Electrical Power ◽  
Vibration Energy ◽  
Frequency Spectra ◽  
Potential Energy Barrier ◽  
Piezoelectric Energy

Many common environmental vibration sources exhibit low and broad frequency spectra. In order to exploit such excitations, energy harvesting architectures utilizing nonlinearity, especially bistability, have been widely studied since the energetic interwell oscillations between their stable equilibria can provide enhanced power harvesting capability over a wider bandwidth compared to the linear counterpart. However, one of the limitations of these nonlinear architectures is that the interwell oscillation regime may not be activated for a low excitation level that is not strong enough to overcome the potential energy barrier, thus resulting in low amplitude intrawell response which provides poor energy harvesting performance. While the strategic integration of bistability and additional dynamic elements has shown potential to improve broadband energy harvesting performance by lowering the potential barrier, there is a clear opportunity to further improve the energy harvesting performance by extracting electrical power from the kinetic energy in the additional element that is induced when the potential barrier is lowered. To explore this opportunity and advance the state of the art, this research develops a novel hybrid bistable vibration energy harvesting system with a passive mechanism that not only adaptively lowers the potential energy barrier level to improve broadband performance but also exploits additional means to capture more usable electrical power. The proposed harvester is comprised of a cantilever beam with repulsive magnets, one attached at the free end and the other attached to a linear spring that is axially aligned with the cantilever (a spring-loaded magnet oscillator). This new approach capitalizes on the adaptive bistable potential that is passively realized by the spring-loaded magnet oscillator, which lowers the double-well potential energy barrier thereby facilitating the interwell oscillations of the cantilever across a broad range of excitation conditions, especially for low excitation amplitudes and frequencies. The interwell oscillation of the cantilever beam enhances not only the piezoelectric energy harvesting from the beam but also the electromagnetic energy harvesting from the spring-loaded magnet oscillator by inducing large amplitude vibrations of the magnet oscillator. Numerical investigations found that the proposed architecture yields significantly enhanced energy harvesting performance compared to the conventional bistable harvester with fixed magnet.

Sign in / Sign up

Export Citation Format

Share Document