Design and Implementation of an Innovative Manufacturing Process for Aerial and Land Supply Needs

SCADA is the technology that allows the operator to gather data from one or more various facilities and to send control instructions to those facilities. This paper represents an adaptable and low cost SCADA system for a particular sugar manufacturing process, by using Programmable Logic Controls (Siemens s7-1200, 1214Dc/ Dc/ Rly). The system will control and monitor the laboratory production line chose from sugar industry. The project comprises of two sections the first one is the hardware section that has been designed, and built using components suitable for making it for laboratory purposes, and the second section was the software as the PLC programming, designing the HMI, creating alarms and trending system. The system will have two HMI screens according to the two operating states of system (Automatic and Manual), the operator can choose between them by a selector switch, this method helps the operators when fixing a failure and wanting to check it without operating all the process. The result has accomplished the goals of controlling, the parameters (temperature, flow, humidity) were monitored, failure was detected by an alarm.

Download Full-text

Characteristic of Core Manufacturing Process with Use of Sand, Bonded by Ecological Friendly Nonorganic Binders

Archives of Foundry Engineering ◽

10.2478/afe-2013-0052 ◽

2013 ◽

Vol 13 (3) ◽

pp. 19-24

Author(s):

A. Fedoryszyn ◽

J. Dańko ◽

R. Dańko ◽

M. Asłanowicz ◽

T. Fulko ◽

...

Keyword(s):

Manufacturing Process ◽

Heating System ◽

Design And Implementation ◽

The Core ◽

Hot Air ◽

Gas Purging ◽

Cold Box ◽

Inorganic And Organic

Abstract Mechanization of the process of core making with the use of inorganic and organic binders is based, almost solely, on core blowing machines. Presently the core blowing machines are equipped with tools and devices that allow for application of different technologies of core making. Cold-box, hot-box and warm-air technologies require that core blowing machines shall be additionally equipped with either core-box pre-heating system or gas purging and neutralization system, or hot air purging systems. Considering the possibility of using varied, the most advantageous technologies of core making, the production of universal core blowing machines equipped with replaceable devices has been undertaken in Poland. The universal core blowing systems allow for mechanization of core making process also with the use of sand, bonded by modern, eco-friendly binder systems. The paper presents selected results-based evaluation of core blowing process showing the scope of conducted design and implementation works.

Download Full-text

Design and Implementation of Diamond Press'S Pressure Hammer Protection Based on Voiceprint Recognition

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.539.156 ◽

2014 ◽

Vol 539 ◽

pp. 156-160

Author(s):

Lin Jing Wang ◽

Ying Ying Zhao

Keyword(s):

Manufacturing Process ◽

Sound Pressure ◽

Economic Losses ◽

Protection Device ◽

Characteristic Parameters ◽

Design And Implementation ◽

Template Library ◽

Artificial Diamond ◽

Field Sound ◽

Tungsten Steel

In the manufacturing process of artificial diamond micro powder, if tungsten steel pressure hammer of diamond press makes a tungsten steel hammer pressure crack due to fatigue of workpiece, it is always leading to significant economic losses. The pressure hammer detection and protection device of the diamond press introduced in this paper takes advantage of the voiceprint recognition technology. Firstly, it extracts the characteristic parameters of pressure hammer breaking voice and establishes a sound pressure hammer breaking template library. And then, the paper compares the work field sound characteristic parameters of diamond press and pressure hammer breaking template library. If they are consistent with each other, the work power of diamond press will be cut down. Thus, it implements protection for the rest good pressure hammers.

Download Full-text

Design and Implementation of monitoring and Management System for Discrete Manufacturing Process Based on IOT Technology

Proceedings of the 2nd International Conference on Civil, Materials and Environmental Sciences ◽

10.2991/cmes-15.2015.67 ◽

2015 ◽

Cited By ~ 1

Author(s):

Qibing Lu ◽

Buyun Sheng

Keyword(s):

Manufacturing Process ◽

Management System ◽

Design And Implementation ◽

Discrete Manufacturing

Download Full-text

Proposal for an IIoT Device Solution According to Industry 4.0 Concept

Sensors ◽

10.3390/s22010325 ◽

2022 ◽

Vol 22 (1) ◽

pp. 325

Author(s):

Andrea Vaclavova ◽

Peter Strelec ◽

Tibor Horak ◽

Michal Kebisek ◽

Pavol Tanuska ◽

...

Keyword(s):

Manufacturing Process ◽

Industry 4.0 ◽

Finite State Machine ◽

Design Procedure ◽

Industrial Internet Of Things ◽

Process Data ◽

Open Platform ◽

Design And Implementation ◽

Industrial Internet ◽

Finite State

Today, Industrial Internet of Things (IIoT) devices are very often used to collect manufacturing process data. The integration of industrial data is increasingly being promoted by the Open Platform Communications United Architecture (OPC UA). However, available IIoT devices are limited by the features they provide; therefore, we decided to design an IIoT device taking advantage of the benefits arising from OPC UA. The design procedure was based on the creation of sequences of steps resulting in a workflow that was transformed into a finite state machine (FSM) model. The FSM model was transformed into an OPC UA object, which was implemented in the proposed IIoT. The OPC UA object makes it possible to monitor events and provide important information based on a client’s criteria. The result was the design and implementation of an IIoT device that provides improved monitoring and data acquisition, enabling improved control of the manufacturing process.

Download Full-text

Design and Implementation of a Tensile Testing Machine

Műszaki Tudományos Közlemények ◽

10.33894/mtk-2020.13.06 ◽

2020 ◽

Vol 13 (1) ◽

pp. 50-53

Author(s):

Hunor Fábián ◽

Attila Gergely

Keyword(s):

Tensile Strength ◽

Manufacturing Process ◽

Tensile Testing ◽

Testing Machine ◽

Polymeric Materials ◽

Tensile Testing Machine ◽

Design And Implementation ◽

Mechanical Part ◽

Design And Manufacturing ◽

Stepper Motors

AbstractThe aim of this paper is to present the design and manufacturing process of a tensile testing machine capable of measuring the tensile strength of polymeric materials. The structure of the instrument is similar to that used in the industry; however, it is budget friendly. The instrument consists of a frame, and two screws which are driven by two stepper motors. An Arduino is used to control the mechanical part of the instrument and to connect it to the software.

Download Full-text