scholarly journals Verification of bi-parameter models of dependence diameter on breast height in birch stands

Author(s):  
А.В. Лебедев ◽  
В.В. Кузьмичев

Важное значение как в лесохозяйственных работах, так и при проведении научных исследований имеет точность определения высоты деревьев. Высота обычно определяется с использованием конкретных моделей, где она является функцией от диаметра дерева на высоте груди. Наиболее простыми моделями зависимости высоты деревьев от диаметра на высоте груди являются двухпараметрические, и они находят широкое применение в лесотаксационных работах. На материалах 23 пробных площадей с измерением модельных деревьев, заложенных в березовых древостоях Лесной опытной дачи Тимирязевской сельскохозяйственной академии, проводилось определение параметров для 14 двухпараметрических моделей, наиболее часто встречающихся в литературных источниках. Параметры моделей вычислялись путем минимизации среднеквадратической ошибки. Качество моделей оценивалось по следующим метрикам: квадратный корень из среднеквадратической ошибки, коэффициент детерминации, информационный критерий Акаике, информационный критерий Байеса. Полученные результаты подтвердили целесообразность использования на практике ряда уравнений, которые среди двухпараметрических моделей показывают приемлемое качество. Результаты анализа данных показывают, что со статистической точки зрения полученные различия в качестве моделей не являются значимыми на 5-м уровне (t-тест). Обоснованные в качестве лучших модели зависимости высоты от диаметра на высоте груди могут быть использованы на практике при выполнении лесохозяйственных и научно-исследовательских работ в березовых древостоях, произрастающих в центральных регионах европейской части России. Методика проведенного исследования позволяет повторить аналогичную работу для древесных пород и лесорастительных условий, для которых информация о характере связи высоты с таксационным диаметром является неполной или отсутствует. The accuracy of determining the height of trees is important both in forestry and in scientific research. Height is usually determined using specific models, where it is a function of the diameter at breast height. The simplest models of the dependence of tree height on diameter at breast height are two-parameter, and they are widely used in forest taxation researches. On the materials of 23 sample plots with the measurement of model trees laid in birch stands of the Forest Experimental District of the Timiryazev Agricultural Academy, the parameters were determined for the 14 bi-parameter models that are most often found in literary sources. Model parameters were calculated by minimizing the standard error. The quality of the models was evaluated by the following metrics: the square root of the standard error, the coefficient of determination, the Akaike information criterion, the Bayes information criterion. The obtained results confirmed the feasibility of using in practice several equations, which among the biparameter models show acceptable quality. The results of data analysis show that, from a statistical point of view, the differences obtained in the quality of models are not significant at the 5 level (t-test). Substantiated as the best models of the dependence of height on diameter at breast height can be used in practice when performing forestry and research work in birch stands growing in the central regions of the European part of Russia. The methodology of the study allows you to repeat the same work for tree species and forest conditions, for which information about the nature of the relationship of height with the diameter at breast height is incomplete or absent.

2021 ◽  
pp. 106-125

The paper evaluated the performance of the current functional tree taper and volume models. The models were applied to some selected economically important natural Terminalia tree species common to central Sudan, namely, Terminalia laxiflora and, Terminalia brownii. 22 two-variable models (Diameter at breast height and total tree height or bole height) and 10 three-variables models (Diameter at ground level, Diameter at breast height and total tree height or bole height) were evaluated. The tree variables measured were the diameter at breast height (DBH, cm), diameter at the base of the tree (d0, cm), upper stem diameters (di), total tree height (H), and height to the base of the crown (Hb). Data were extracted from a natural reserved forest in the Blue Nile state. The models goodness of fit were evaluated in terms of adjusted coefficient of determination (Ra2), standard error (SE), mean absolute residual (MAR), bias (BI) Akaike’s information criterion (AIC), homogeneity of the residuals and significance of the regression parameters. Taper-17 and Taper-19 were found to be among the best two models for the two species with R2 range of 0.94 – 0.93, but with different rankings for each species. Comparison of the range of data for the tow studied species suggested that representation of various diameter at breast height (DBH, cm), diameter at the base of the tree (d0, cm), upper stem diameters (di), total tree height (H), and height to the base of the crown (Hb), had significant influence on the accuracy of prediction outside the range of the fitted data. This implies that application of the selected models is only useful at local stand level or at best in similar biological and stand structure conditions. For volume models, The results indicated that individual equations act differently in each species as there were great variations in the values of the same parameter of a given model accross the species. Some regression parameters of a given model were found to be significant in some species and insignificant in others. Comparison between the two versions of each group reveals that the replacement of the total tree height by the bole height (merchantable height) improves both the level of parameter significance and the coefficient of determination. From the first, the regression parameters of only 5 models (VOL-1, VOL-5, VOL-8, VOL-17, and VOL-20) were found to be significant at 0.05 probability level for all the tow species. The results also reveal that inclusion of variable D0 to the original two variables (DBH, Ht) to the volume equations results in insignificant improvement of the Ra2 values, while the replacement of the original model Ht variable with the Hb results in quite significant improvement of the Ra2 values. However, substantial improvement of the Ra2 values were obtained when both D0 and Hb were added. For this group of models, VOL-23, VOL-25- VOL-29 VOL30- and VOL-31were found to be the best for almost all the tow species. In general, the study concluded that taper and volume models can provide precise and accurate tree growth variables for the studied species with reasonable cost and time, but care should be taken when dealing with same model for the same species across the varying growth and management condition.


2021 ◽  
pp. 50-70

This paper developed and evaluated the performance of the current functional tree taper and volume models. The models were applied to some selected economically important natural tree species common to central Sudan, namely, Combretum hartmannianum and, Lonchocarpus Laxiflorus. The tree variables measured were the diameter at breast height (DBH, cm), diameter at the base of the tree (d0, cm), upper stem diameters (di), total tree height (H), and height to the base of the crown (Hb). In total, 19 taper and 32 volume models were tested and evaluated (22 models were two-variable models (Diameter at breast height and total tree height or bole height) and 10 were three-variable models (Diameter at ground level, Diameter at breast height and total tree height or bole height). The model goodness of fit was evaluated in terms of adjusted coefficient of determination (Ra2), standard error (SE), mean absolute residual (MAR), bias (BI) Akaike’s information criterion (AIC), homogeneity of the residuals and significance of the regression parameters. As far as taper models is concerned, Models, some of the models were found to yield satisfactory results for the tow selected species with R2 range of 0.94 – 0.96. For the within species variation of models on the basis of the AIC values, the ranking of the models (smaller AIC first) were in consistant with the rankings due to SE and Ra2 values although AIC penalizes models in proportion to the number regression parameters. In general the results of the study indicated that higher residuals valuse are in most of the cases associated with the lower parts of the bole, the butress portion of the stem. This suggests that care should be taken during the application of such models for hardwood species, especially in open woodlands where butress is a common characteristic.The results for volume models revealed differences in the behaviour of different models for each species as the degree of significance of the regression parameters varies between tree species. However, the replacement of the total tree height by the bole height (merchantable height) improves both the level of parameter significance and the coefficient of determination. The results also reveal that inclusion of diameter at grown level to the original two variables (DBH, Ht) and the replacement of the original model total height with the bale height results in quite significant improvement of the Ra2 values. In general, the study concluded that taper and volume models can provide precise and accurate estimation of tree growth variables for the studied species with reasonable cost and time, but care should be taken when dealing with same model for the same species across varying growth and management condition, or when dealing with different species. country.


2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.


Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 380
Author(s):  
Karol Bronisz ◽  
Szymon Bijak ◽  
Rafał Wojtan ◽  
Robert Tomusiak ◽  
Agnieszka Bronisz ◽  
...  

Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.


2010 ◽  
Vol 59 (1-6) ◽  
pp. 1-7 ◽  
Author(s):  
G. P. S. Dhillon ◽  
Avtar Singh ◽  
Pritpal Singh ◽  
D. S. Sidhu

Abstract Results from clonal trials of Populus deltoides conducted in two distinct agroclimatic regions of Punjab in northwestern India are reported and discussed. Sixteen clones were evaluated at Hambran and Bathinda where commonly grown clone ‘G-48’ was considered as control. Significant differences among clones (P < 0.001) were observed for diameter at breast height (DBH), tree height and volume at the age of four and six years under both the site conditions. Clone ‘L-48’ ranked first for volume at six year age at both sites and was followed by clone ‘Ranikhet’. The respective superiority for volume of these clones over control was 44.8 and 23.2 per cent at Hambran and 72.5 and 30.7 per cent at Bathinda. All growth traits registered significantly higher values at Hambran in comparison to those at Bathinda. Clone x site interaction was also significant (P < 0.001). The clones ‘L-168’, ‘154/86’, ‘Solan-z’ and ‘170/88’ experienced huge fluctuation in ranking between sites for volume at 6-year age. The DBH and height showed significant and positive correlation with each other and with tree volume at all the age combinations. The clonal mean heritability was quite high both at Hambran (0.73-0.86) and Bathinda (0.80-0.95). The genetic advance were the highest for volume (33.34-64.26%) and the lowest (10.65-22.79%) in case of height.


2012 ◽  
Vol 94 (4) ◽  
pp. 188-191 ◽  
Author(s):  
Megumi Ishida ◽  
Satoshi Naoi ◽  
Yasumasa Watanabe ◽  
Akinori Tsuzuku ◽  
Masaya Aoki

2016 ◽  
Vol 58 (1) ◽  
pp. 31-42 ◽  
Author(s):  
Katarzyna Kaźmierczak ◽  
Bogna Zawieja

AbstractThe paper presents an attempt to apply measurable traits of a tree – crown projection area, crown length, diameter at breast height and tree height for classification of 135-year-old oak (QuercusL.) trees into Kraft classes. Statistical multivariate analysis was applied to reach the aim. Empirical material was collected on sample plot area of 0.75 ha, located in 135-year-old oak stand. Analysis of dimensional traits of oaks from 135-year-old stand allows quite certain classification of trees into three groups: pre-dominant, dominant and co-dominant and dominated ones. This seems to be quite promising, providing a tool for the approximation of the biosocial position of tree with no need for assessment in forest. Applied analyses do not allow distinguishing trees belonging to II and III Kraft classes. Unless the eye-estimation-based classification is completed, principal component analysis (PCA) method provided simple, provisional solution for grouping trees from 135-year-old stand into three over-mentioned groups. Discriminant analysis gives more precise results compared with PCA. In the analysed stand, the most important traits for the evaluation of biosocial position were diameter at breast height, crown projection area and height.


2018 ◽  
Vol 39 (3) ◽  
pp. 1327
Author(s):  
Cleber Franklin Santos de Oliveira ◽  
João Marcos Novais Tavares ◽  
Gerusa Da Silva Salles Corrêa ◽  
Bruno Serpa Vieira ◽  
Silvana Alves Pedrozo Vitalino Barbosa ◽  
...  

The aim of this study was to compare mathematical models describing growth curves of white-egg layers at different population densities. To fit the models, 4,000 growing white-egg layers were utilized. The experimental design was completely randomized, with population densities of 71, 68, 65, 62, and 59 birds per cage in the starter phase and 19, 17, 15, 13, and 11 birds per cage in the grower phase, with 10 replicates each. Birds were weighed weekly to determine the average body weight and the weight gain. Gompertz and Logistic models were utilized to estimate their growth. The data analysis was carried out using the PROC NLMIXED procedure of the SAS® statistical computer software to estimate the parameters of the equation because mixed models were employed. The mean squared error, the coefficient of determination, and Akaike’s information criterion were used to evaluate the quality of fit of the models. The studied models converged for the description of the growth of the birds at the different densities studied, showing that they were appropriate for estimating the growth of white-egg layers housed at different population densities. The Gompertz model showed a better fit than the Logistic model.


2007 ◽  
Vol 16 (5) ◽  
pp. 642 ◽  
Author(s):  
I. D. Mitsopoulos ◽  
A. P. Dimitrakopoulos

Allometric equations for the estimation of crown fuel weight of Aleppo pine (Pinus halepensis Mill.) trees in the Mediterranean Basin were developed. Forty trees were destructively sampled and their crown fuels were weighed separately for each fuel category. Crown fuel components, both living and dead, were separated into size classes and regression equations that estimate crown fuel load by diameter class were derived. The allometric equation y = axb with diameter at breast height as the single predictor was chosen, because the addition of other parameters did not decrease the residual sum of squares significantly. The adjusted coefficient of determination (R2adj) values were high (R2adj = 0.82–0.88) in all cases. Diameter at breast height was the most significant determinant of crown fuel biomass. The aerial fuels that are consumed during crown fires (i.e. needles and twigs with diameter less than 0.63 cm) comprised 29.3% of the total crown weight. Live fuels constituted ~96.3% of total crown biomass, distributed as follows: needles 16.7% (average load 12.07 kg), branches with 0.0–0.63-cm diameter 12.6% (average load 9.18 kg), 0.64–2.5-cm diameter 37.3% (27.99 kg), 2.51–7.5-cm diameter 25.4% (18.59 kg), and >7.5-cm diameter 3.7% (2.65 kg). The equations provide quantitative fuel biomass attributes for use in crown fire behaviour models, fire management and carbon assessment in Aleppo pine stands.


Sign in / Sign up

Export Citation Format

Share Document