scholarly journals Tree crown size as a measure of tree biosocial position in 135-year-old oak (Quercus L.) stand

2016 ◽  
Vol 58 (1) ◽  
pp. 31-42 ◽  
Author(s):  
Katarzyna Kaźmierczak ◽  
Bogna Zawieja
Keyword(s):  
Principal Component ◽  
Tree Height ◽  
Projection Area ◽  
Tree Crown ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Crown Length ◽  
Pca Method ◽  
Crown Projection Area

AbstractThe paper presents an attempt to apply measurable traits of a tree – crown projection area, crown length, diameter at breast height and tree height for classification of 135-year-old oak (QuercusL.) trees into Kraft classes. Statistical multivariate analysis was applied to reach the aim. Empirical material was collected on sample plot area of 0.75 ha, located in 135-year-old oak stand. Analysis of dimensional traits of oaks from 135-year-old stand allows quite certain classification of trees into three groups: pre-dominant, dominant and co-dominant and dominated ones. This seems to be quite promising, providing a tool for the approximation of the biosocial position of tree with no need for assessment in forest. Applied analyses do not allow distinguishing trees belonging to II and III Kraft classes. Unless the eye-estimation-based classification is completed, principal component analysis (PCA) method provided simple, provisional solution for grouping trees from 135-year-old stand into three over-mentioned groups. Discriminant analysis gives more precise results compared with PCA. In the analysed stand, the most important traits for the evaluation of biosocial position were diameter at breast height, crown projection area and height.

scholarly journals The use of measurable traits of trunk and crown to assess the biosocial classes of oak trees (Quercus robur L.)

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
Krzysztof Turczański ◽  
Bogna Zawieja ◽  
Tomasz Najgrakowski ◽  
Katarzyna Kaźmierczak
Keyword(s):  
Principal Component Analysis ◽  
Quercus Robur ◽  
Principal Component ◽  
Component Analysis ◽  
Projection Area ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Oak Trees ◽  
Crown Projection Area ◽  
Forestry Practice

The crown class assessment is a key element in forestry practice. It is a traditional method that finds application in thinning plans, assessment of site index, tree competition, or crown condition. Assigning trees into a given class is done during field surveys and requires precision and experience to avoid inaccuracy. Therefore, Kraft’s system has often been criticized and modified. Thus, in our study, we aimed to analyse whether the directly measured traits of trunk and crown of oak trees (Quercus robur L.) can be applied to crown class assessment. For this purpose, we used the principal component analysis (PCA) and nonlinear kernel principal component analysis (KPCA) based on measurable traits of trunk and crown, i.e., the height of the tree, the diameter at breast height, the length of the crown, and the field crown projection area. In total, we measured 286 mature trees in three oak stands located in western Poland. Results indicate that all chosen traits of trunk and crown allowed, though not always perfect, to assign the trees into given crown classes. The greatest contribution to crown class distinction had the diameter at breast height and the parameters of crown, i.e., and the field crown projection area. Furthermore, results show that the best method of assigning the trees into biosocial classes is the KPCA Gauss, considering the percentage explanation of the total variability, and KPCA Laplace, considering the visual division. In the latter, the multivariate analysis resulted in a similar crown class assignment as the field-assigned method. However, its application requires measurements that make it neither cheaper nor faster than a traditional crown class assessment. It indicates that a traditional field-assigned method, despite its subjectivity, should continue to be of great importance in forestry practice. Moreover, the alternative traits of trunk and crown can be a potentially useful statistical substitute for crown class assessment. Keywords: crown class, oak stand, trunk and crown traits, multivariate methods

Genetic parameters in diallel-crossed Scots pine favor heartwood formation breeding objectives

1998 ◽  
Vol 28 (6) ◽  
pp. 937-941 ◽  
Author(s):  
Anders Fries ◽  
Tore Ericsson
Keyword(s):  
Genetic Correlation ◽  
Scots Pine ◽  
Heritability Estimate ◽  
Tree Height ◽  
Heartwood Formation ◽  
Environmental Correlations ◽  
Branch Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Crown Length

After 25 years, full-sibs of Scots pine (Pinus sylvestris L.) in a north Swedish progeny test showed an estimated heritability of 0.30 for heartwood diameter at 80 cm above ground. This was equal to the heritability estimate for tree height, although accompanied by a much larger additive genetic coefficient of variation (0.20 compared with 0.06). The heritability estimate for diameter at breast height was about half that for tree height. Strong and positive phenotypic and environmental correlations were assessed between heartwood and the following traits: diameter at breast height, tree height, and branch diameter. The genetic correlation was low and positive at 0.02 between heartwood and diameter at breast height in contrast with 0.27 between heartwood and tree height. The assessed genetic correlations between heartwood and branch diameter and between heartwood and crown length were very weak compared with the phenotypic and, particularly, environmental correlations. This indicates that the association between crown length and heartwood is significant with regard to environmental factors, no matter to what extent they are independently modified by genes. However, crown limit was the trait that showed the strongest genetic correlation with heartwood (0.49). Since no correlations with production traits were unfavorable, we conclude that including heartwood formation capacity in a breeding programmay be done without drawbacks and with good prospects for success.

scholarly journals Slenderness of pedunculate oak (Quercus robur L.) according to biosocial position

2018 ◽  
Vol 73 (3) ◽  
pp. 37-43
Author(s):  
ZDZISŁAW KACZMARSKI ◽  
KATARZYNA MASTERNAK ◽  
MATEUSZ JARMUŁ
Keyword(s):  
Basal Area ◽  
Tree Height ◽  
Projection Area ◽  
Pedunculate Oak ◽  
Single Tree ◽  
Crown Length ◽  
Crown Width ◽  
Growth Space ◽  
Oak Tree ◽  
Crown Projection Area

The paper presents results of an analysis of pedunculate oak slenderness. The dependence between slenderness of the oak tree and dimensions of the trunk and the crown dimensions of a single tree were examined. The biosocial position of each tree was determined based on the Kraft’s classification criteria. Following dimensions were measured for each tree: height, height of base of live crown, crown radius, diameter at breast height. The following crown parameters related to the growth space of a single tree were determined: crown length, crown width, crown projection area, space of a single tree, Seebach’s growth space number, crown projection area to basal area ratio, crown spread. Based on the obtained results, the following was found: biosocial position of the oak tree in vertical structure of the stand has significant impact on the size of the tree slenderness; the slenderness increases with deterioration of the biosocial position of the tree, but it decreases with the increase in the value of the tree’s measurement characteristics and the measures of its crown. 

scholarly journals Estimation of Genetic Parameters and Wood Yield Selection Index in a Clonal Trial of Korean Pine (Pinus koraiensis) in Northeastern China

2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao
Keyword(s):  
Selection Index ◽  
Tree Height ◽  
Stem Volume ◽  
Korean Pine ◽  
Branch Number ◽  
Basal Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Straightness ◽  
Clonal Trial

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.

scholarly journals Seemingly Unrelated Mixed-Effects Biomass Models for Black Locust in West Poland

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 380
Author(s):  
Karol Bronisz ◽  
Szymon Bijak ◽  
Rafał Wojtan ◽  
Robert Tomusiak ◽  
Agnieszka Bronisz ◽  
...  
Keyword(s):  
Black Locust ◽  
Random Effect ◽  
Tree Height ◽  
Cross Model ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Dependent Variables ◽  
Dry Biomass ◽  
Biomass Components ◽  
Independent Variable

Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.

TRIPLOID APPLE VARIETIES OF SUMMER RIPENING SELECTION VNIISPK ON CLONAL ROOTSTOCK 54-118

1970 ◽  
pp. 34-36
Author(s):  
А. M. Galasheva ◽  
Е. N. Sedov
Keyword(s):  
Tree Height ◽  
Projection Area ◽  
Cross Sectional ◽  
Crown Width ◽  
Crown Volume ◽  
The World ◽  
Apple Cultivars ◽  
Crown Projection Area ◽  
Academy Of Sciences ◽  
First Time

For the first time in the world and in Russia, Academician of the Russian Academy of Sciences, breeder Evgeny Nikolaevich Sedov created a series of triploid apple cultivars from intervalent crosses 2х × 4х. Triploid apple cultivars bear fruit more regularly, have higher self-fruitfulness and have fruits of high marketability. The article presents data on the study of triploid apple cultivars of the summer ripening period of the VNIISPK breeding - Augusta, Daryona, Maslovskoye, Osipovskoye, Zhilinskoye, Spasskoye and Yablochny Spas as well as the control Canadian cultivar Melba on a semi-dwarf clone rootstock 54-118. Maslovskoye, Zhilinskoye, Spasskoye and Yablochny Spas have immunity to scab. The orchard was planted in 2014, the garden planting scheme was 5 x 2 m. The indicators of the growth force (tree height, crown width and stem diameter) and the yield of trees were studied. At the age of six, the trees of triploid cultivars reached a height of 2.2 m (Maslovskoye) to 3.0 m (Yablochny Spas) on a semi-dwarf rootstock 54-118. The highest indicators of crown volume (3.3-5.3 m3), crown projection area (4.2-5.3 m2) and the cross-sectional area of the stem (46.5-52.8 cm2) were in Osipovskoye, Yablochny Spas, Zhilinskoye and Spasskoye. The highest yield in an average of three years was given by triploid scab-immune apple cultivars on a semi-dwarf rootstock 54-118: Maslovskoye, Zhilinskoye, Spasskoye and Yablochny Spas.

scholarly journals Field Evaluation of Populus deltoides Bartr. ex Marsh. at Two Sites in Indo-gangetic Plains of India

2010 ◽  
Vol 59 (1-6) ◽  
pp. 1-7 ◽  
Author(s):  
G. P. S. Dhillon ◽  
Avtar Singh ◽  
Pritpal Singh ◽  
D. S. Sidhu
Keyword(s):  
Populus Deltoides ◽  
Growth Traits ◽  
Tree Height ◽  
Field Evaluation ◽  
Site Conditions ◽  
Genetic Advance ◽  
Gangetic Plains ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Northwestern India

Abstract Results from clonal trials of Populus deltoides conducted in two distinct agroclimatic regions of Punjab in northwestern India are reported and discussed. Sixteen clones were evaluated at Hambran and Bathinda where commonly grown clone ‘G-48’ was considered as control. Significant differences among clones (P < 0.001) were observed for diameter at breast height (DBH), tree height and volume at the age of four and six years under both the site conditions. Clone ‘L-48’ ranked first for volume at six year age at both sites and was followed by clone ‘Ranikhet’. The respective superiority for volume of these clones over control was 44.8 and 23.2 per cent at Hambran and 72.5 and 30.7 per cent at Bathinda. All growth traits registered significantly higher values at Hambran in comparison to those at Bathinda. Clone x site interaction was also significant (P < 0.001). The clones ‘L-168’, ‘154/86’, ‘Solan-z’ and ‘170/88’ experienced huge fluctuation in ranking between sites for volume at 6-year age. The DBH and height showed significant and positive correlation with each other and with tree volume at all the age combinations. The clonal mean heritability was quite high both at Hambran (0.73-0.86) and Bathinda (0.80-0.95). The genetic advance were the highest for volume (33.34-64.26%) and the lowest (10.65-22.79%) in case of height.

scholarly journals Evaluation of the Relative Stem Taper Curves Estimated Only from Tree Height and Diameter at Breast Height:

2012 ◽  
Vol 94 (4) ◽  
pp. 188-191 ◽  
Author(s):  
Megumi Ishida ◽  
Satoshi Naoi ◽  
Yasumasa Watanabe ◽  
Akinori Tsuzuku ◽  
Masaya Aoki
Keyword(s):  
Tree Height ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Taper

scholarly journals Crown structure of Picea omorika trees in the plantation

2012 ◽  
Vol 64 (2) ◽  
pp. 605-611 ◽  
Author(s):  
M. Krstic ◽  
N. Stavretovic ◽  
V. Isajev ◽  
I. Bjelanovic
Keyword(s):  
Tree Height ◽  
Tree Crown ◽  
Crown Length ◽  
Crown Structure ◽  
Parabolic Function ◽  
Picea Omorika ◽  
Serbian Spruce ◽  
The Relationship ◽  
Total Tree ◽  
Stand Conditions

The study was carried out in Serbian spruce (Picea omorika Panc/Purkyn?) plantations in the western Serbia. The paper presents results of the analysis of crown development. The following elements were analyzed: total tree height, height of the crown base, absolute and relative crown length, maximal crown diameter, coefficient of crown spreading and degree of crown girth. We discuss approaches to the modeling of tree crown growth and development, growing under favorable environmental and stand conditions, without anomalies in development. In order to establish the relationship between analyzed factors, regression analyses were applied. Data fitting was by the analytic method, by the implementation of Prodan?s functions of growth, linear and parabolic function. Received models can be used for the simulation of various growth and developing processes in forest.

scholarly journals Deteksi Formalin Pada Buah Tomat (Lycopersicum esculentum Mill) Dengan Teknologi Hidung Elektronik (Electronic Nose)

2019 ◽  
Vol 4 (2) ◽  
pp. 359-366
Author(s):  
Irfan Maibriadi ◽  
Ratna Ratna ◽  
Agus Arip Munawar
Keyword(s):  
Principal Component Analysis ◽  
Electronic Nose ◽  
Principal Component ◽  
Component Analysis ◽  
Lycopersicum Esculentum ◽  
Olfactory Ability ◽  
Pca Method ◽  
The Difference ◽  
Electronic Nose Technology

Abstrak,  Tujuan dari penelitian ini adalah mendeteksi kandungan dan kadar formalin pada buah tomat dengan menggunakan instrument berbasis teknologi Electronic nose. Penelitian ini menggunakan buah tomat yang telah direndam dengan formalin dengan kadar 0.5%, 1%, 2%, 3%, 4%, dan buah tomat tanpa perendaman dengan formalin (0%). Jumlah sampel yang digunakan pada penelitian ini adalah sebanyak 18 sampel. Pengukuran spektrum beras menggunakan sensor Piezoelectric Tranducer. Klasifikasi data spektrum buah tomat menggunakan metode Principal Component Analysis (PCA) dengan pretreatment nya adalah Gap Reduction. Hasil penelitian ini diperoleh yaitu: Hidung elektronik mulai merespon aroma formalin pada buah tomat pada detik ke-8.14, dan dapat mengklasifikasikan kandungan dan kadar formalin pada buah tomat pada detik ke 25.77. Hidung elektronik yang dikombinasikan dengan metode principal component analysis (PCA) telah berhasil mendeteksikandungan dan kadar formalin pada buah tomat dengan tingkat keberhasilan sebesar 99% (PC-1 sebesar 93% dan PC-2 sebesar 6%). Perbedaan kadar formalin menjadi faktor utama yang menyebabkan Elektronik nose mampu membedakan sampel buah tomat yang diuji, karena semakin tinggi kadar formalin pada buah tomat maka aroma khas dari buah tomat pun semakin menghilang, sehingga Electronic nose yang berbasis kemampuan penciuman dapat membedakannya.Detect Formaldehyde on Tomato (Lycopersicum esculentum Mill) With Electronic Nose TechnologyAbstract, The purpose of this study is to detect the contents and levels of formalin in tomatoes by using instruments based on Electronic nose technology. This study used tomatoes that have been soaked in formalin with a concentration of 0.5%, 1%, 2%, 3%, 4%, 5% and tomatoes without soaking with formalin (0%). The samples in this study were 18 samples. The measurements of the intensity on tomatoes aroma were using Piezoelectric Transducer sensors. The classification of tomato spectrum data was using the Principal Component Analysis (PCA) method with Gap Reduction pretreatment. The results of this study were obtained: the Electronic nose began to respond the smell of formalin on tomatoes at 8.14 seconds, and it could classify the content and formalin levels in tomatoes at 25.77 seconds. Electronic nose combined with the principal component analysis (PCA) method have successfully detected the content and levels of formalin in tomatoes with a success rate at 99% (PC-1 of 93% and PC-2 of 6%). The difference of grade formalin levels is the main factor that causes Electronic nose to be able to distinguish the tomato samples tested, because the higher of formalin content in tomatoes, the distinctive of tomatoes aroma is increasingly disappearing. Thereby, the Electronic nose based on  the olfactory ability can distinguish them. 

Sign in / Sign up

Export Citation Format

Share Document