scholarly journals Weed Control in Processing Tomato (Lycopersicon esculentum) with Rimsulfuron and Thifensulfuron Applied Alone or with Chlorothalonil or Copper Pesticides

HortScience ◽  
2006 ◽  
Vol 41 (5) ◽  
pp. 1295-1297 ◽  
Author(s):  
Darren E. Robinson ◽  
Nader Soltani ◽  
Allan S. Hamill ◽  
Peter H. Sikkema
Keyword(s):  
Weed Control ◽  
Production Efficiency ◽  
Field Trials ◽  
Copper Hydroxide ◽  
Crop Response ◽  
Marketable Yield ◽  
Tomato Crop ◽  
Processing Tomato ◽  
Low Rate ◽  
Improve Production Efficiency

Combining herbicides and fungicides can improve production efficiency; however, there is little information on the effect of these mixtures on weed control and processing tomato crop response. Six field trials were conducted from 2002 to 2004 in Ontario to study the effect of rimsulfuron and thifensulfuron applied alone or in combination with metribuzin and with or without chlorothalonil or copper fungicides on processing tomato. There was no visual injury or reduction in marketable yield of processing tomato with rimsulfuron or thifensulfuron alone or when tank-mixed with chlorothalonil or copper hydroxide. Rimsulfuron, thifensulfuron, rimsulfuron plus metribuzin, and thifensulfuron plus metribuzin could be tank-mixed with chlorothalonil without a reduction in weed control. However, efficacy of rimsulfuron and thifensulfuron were reduced when tank-mixed with copper hydroxide. The reduction in weed control incited by adding copper hydroxide was overcome with a low rate (150 g·ha–1 a.i.) of metribuzin for thifensulfuron but not rimsulfuron. Application of rimsulfuron and thifensulfuron alone or with low rates of metribuzin and chlorothalonil could provide tomato growers with a single-pass treatment for the control of troublesome weeds and diseases.

scholarly journals Optimizing N Fertilization to Improve Yield, Technological and Nutritional Quality of Tomato Grown in High Fertility Soil Conditions

Plants ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 575 ◽  
Author(s):  
Domenico Ronga ◽  
Alfonso Pentangelo ◽  
Mario Parisi
Keyword(s):  
N Fertilization ◽  
Fruit Yield ◽  
Soil Conditions ◽  
High Fertility ◽  
Marketable Yield ◽  
Tomato Crop ◽  
Processing Tomato ◽  
Yield And Quality ◽  
N Rates

Processing tomato is the second most important worldwide cash crop, generally produced in high-input systems. However, fruit yield and quality are affected by agronomic management, particularly nitrogen (N) fertilization, whose application to indeterminate growth genotypes for canning has yet to be investigated in depth. Hence, the objective of this work was to assess the effects of different N rates (0, 50, 125, 200, 275, and 350 kg ha−1) on fruit yield and quality characteristics of processing tomato ‘San Marzano’ landrace. The results of our study showed that 125 and 200 kg of N ha−1 are the most appropriate rates in soil with high fertility, ensuring the highest values of marketable yield and brix yield. However, plants fertilized with 125 kg of N ha−1 attained higher values of N efficiency and fruit K and P concentrations than plants fertilized with 200 kg of N ha−1. Our results suggest that overdoses of N supplies negatively affected fruit yield and quality of San Marzano landrace grown in high soil fertility conditions, also reducing the agricultural sustainability. Hence, specific agronomic protocol and extension services are required to optimally manage tomato crop systems.

Weed Control and Potato (Solanum Tuberosum) Crop Response With Low Rates of Sulfentrazone Applied Postemergence With Metribuzin

2006 ◽  
Vol 20 (4) ◽  
pp. 1023-1029 ◽  
Author(s):  
Pamela J.S. Hutchinson ◽  
Brent R. Beutler ◽  
Daniel M. Hancock
Keyword(s):  
Solanum Tuberosum ◽  
Weed Control ◽  
Potato Crop ◽  
Field Trials ◽  
Russet Burbank ◽  
Crop Response ◽  
Common Lambsquarters ◽  
Hairy Nightshade ◽  
Redroot Pigweed ◽  
Crop Injury

Sulfentrazone was applied POST at 13, 26, or 53 g ai/ha alone or in combination with metribuzin at 280 or 420 g ai/ha in field trials conducted with ‘Russet Burbank’ potatoes in 2002 to 2004. Sulfentrazone alone provided less than 84% redroot pigweed, common lambsquarters, and kochia control, although control usually improved to 90% or greater when metribuzin was included. Hairy nightshade control reached 90% only when the highest rates of both herbicides were applied in combination. Sulfentrazone alone did not provide any volunteer oat control, whereas control was 85% when the highest metribuzin rate was included. Potato crop injury, consisting of chlorosis, interveinal blackening of the leaves, eventual necrosis, leaf malformation, and plant stunting, increased as the sulfentrazone rate increased. In contrast, injury decreased as metribuzin rate increased from 0 to 420 g/ha, when averaged across sulfentrazone rates. Reduction in injury levels and increased weed control translated to improved tuber yields as metribuzin rate increased. However, when sulfentrazone was combined with the highest metribuzin rate, potato injury was still relatively high at 26 and 18% at 1 and 4 wk after treatment, and acceptance of sulfentrazone applied POST with metribuzin by potato growers is unlikely.

scholarly journals Use of Olive-Mill Wastewater for the Containment of Phelipanche ramosa in Open Field of Processing Tomato Crop

2021 ◽  
Vol 12 (10) ◽  
pp. 304-310
Author(s):  
Francesco Lops ◽  
◽  
Antonia Carlucci ◽  
Laura Frabboni ◽  
Annalisa Tarantino ◽  
...  
Keyword(s):  
Open Field ◽  
Untreated Control ◽  
Olive Mill Wastewater ◽  
Marketable Yield ◽  
Tomato Crop ◽  
Tomato Seedling ◽  
Processing Tomato ◽  
Growing Seasons ◽  
Phelipanche Ramosa ◽  
Olive Mill

Phelipanche ramosa (L.) Pomel is a root holoparasitic weed that infested many crops, particularly the processing tomato. In semi-arid regions of the world, this problem is increasing, both in intensity and in acreages. In the last few years, researches for the control of this parasite has increased its effort to use suitable methods, as well as the utilization of natural compounds. In this regard, four experimental trials were carried out over three growing seasons (2014, 2016 and 2017), at Foggia (Apulia Region, Southern Italy), in the open field, on processing tomato (cv. “Dres”) crop, infested by P. ramosa, where the olive-mill wastewater (OMW) was incorporated into the soil at the dose of 80 m3 ha-1 40 days prior to tomato seedling transplant in comparison with the untreated control. The numbers of P. ramosa emerged shoots (branched plants) were significantly lower in the OMW treatment than in the untreated control. The tomato marketable yield showed a significantly higher value in the OMW treatment than the untreated control. No significant differences for the fruit qualitative characteristics were observed.

The Potential Use of Vinegar and a Clove Oil Herbicide for Weed Control in Sweet Corn, Potato, and Onion

2009 ◽  
Vol 23 (1) ◽  
pp. 120-128 ◽  
Author(s):  
G. J. Evans ◽  
R. R. Bellinder
Keyword(s):  
Weed Control ◽  
Sweet Corn ◽  
Field Trials ◽  
Clove Oil ◽  
Weed Species ◽  
Marketable Yield ◽  
Yield Data ◽  
Application Timing ◽  
Time Of Application ◽  
Potential Use

Natural products might provide an organic means of weed control. Our objective was to evaluate the potential use of vinegar and a clove-oil product with regard to how volume, concentration, and application timing affect weed control and crop response. Treatments included broadcast applications of 200- and 300-grain vinegar at 318 liters per hectare (L/ha), 150- and 200-grain vinegar at 636 L/ha, a 3.4% v/v clove oil mixture in water (318 L/ha), and a 1.7% clove oil mixture in 200-grain vinegar (318 L/ha). Field trials were conducted in sweet corn, onion, and potato. Weed control, weed biomass, crop injury, and yield data were collected. Corn treated at 15 and at 30 to 45 cm was initially burned and stunted by these products. By 4 wk after application much of the initial injury was outgrown. Late applications significantly reduced yields of early-maturing sweet corn ‘Trinity’. With the exception of the 200-grain vinegar (318 L/ha) treatment, early applications to sweet corn ‘Avalon’ did not reduce marketable yield. Two hundred-grain vinegar (636 L/ha) applied to pre-emergence–flag stage onion reduced the duration of the first handweeding by 59 to 67%. All treatments reduced onion yields when treated at the 2-leaf stage. Potato treated early (2 to 10 cm) and late (30 cm) were injured by all vinegar treatments 59 to 83%, 1 d after treatment (DAT). Potato yield losses were insignificant with applications of 3.4% clove oil and with some low-volume (318 L/ha) vinegar treatments. Product efficacy was dependent on the weed species and their size at the time of application. Weed control was greatest (83%, 1 DAT) with 200-grain vinegar (636 L/ha). Broadcast applications of vinegar and clove oil have potential for use on young, actively growing sweet corn, onion, and potato.

Effective mechanical weed control in processing tomato: Seven years of results

2013 ◽  
Vol 30 (3) ◽  
pp. 223-232 ◽  
Author(s):  
A. Cirujeda ◽  
J. Aibar ◽  
M.M. Moreno ◽  
C. Zaragoza
Keyword(s):  
Weed Control ◽  
Field Trials ◽  
Biodegradable Plastic ◽  
Effective Control ◽  
Soil Conditions ◽  
Control Methods ◽  
Plastic Mulch ◽  
Processing Tomato ◽  
Physical Weed Control ◽  
Mechanical Weed Control

AbstractOpen-air crops are important in Spanish horticulture. The limited number of herbicide active ingredients in minor crops, the waste problem of polyethylene (PE) plastic mulch and the high prices of biodegradable plastics leave hand-weeding and mechanical weed control as the most viable weed control methods. Different tools have been tested in northern European countries but their performance remains unknown in the edaphoclimatic situation of southern Europe. The objective of this work was to test novel physical weed control methods on processing tomato in northeastern Spain compared with other effective control methods, i.e., plastic and paper mulches. A first sequence of field trials was established from 2005 to 2008 at Zaragoza (Spain) to select the best physical control methods out of flamer, torsion weeder, finger weeder, flex-tine harrow and brush hoe used alone or in combination. The best method was the brush hoe which was then compared from 2009 to 2011 with PE mulch, biodegradable plastic mulch and paper mulch. Flamer, flex-tine harrow, torsion weeder and finger weeder performed quite irregularly due to crusty soil conditions and needed additional tools or repeated treatments to increase weed control efficacy. The brush hoe performed best in this soil situation working at about 5 cm depth. Weed biomass reduction was higher than 80% in 6 out of 7 years and similar yield was obtained in the brushed plots compared to the yield obtained with PE, biodegradable plastic and paper mulch. The brush hoe is thus a suitable option for weed control in processing tomato while the other tools were too weak to control aggressive summer weeds in the tested conditions.

Allyl Isothiocyanate: A Methyl Bromide Replacement in Polyethylene-Mulched Bell Pepper

2011 ◽  
Vol 25 (1) ◽  
pp. 90-96 ◽  
Author(s):  
Sanjeev K. Bangarwa ◽  
Jason K. Norsworthy ◽  
Edward E. Gbur ◽  
Jingying Zhang ◽  
Tsehaye Habtom
Keyword(s):  
Weed Control ◽  
Methyl Bromide ◽  
Standard Treatment ◽  
Allyl Isothiocyanate ◽  
Field Trials ◽  
Bell Pepper ◽  
Marketable Yield ◽  
Control Efficacy ◽  
Yellow Nutsedge ◽  
Potential Alternative

Methyl bromide has been a key fumigant for broad-spectrum weed control in polyethylene-mulched bell pepper. However, the ozone-depleting nature of methyl bromide has led to its scheduled phaseout from U.S. agriculture. Thus, an effective alternative to methyl bromide is needed. Field trials were conducted in 2007 and 2009 to evaluate the crop response and weed control efficacy of allyl isothiocyanate (ITC) in polyethylene-mulched bell pepper. The experiment included various combinations of two mulch types (low density polyethylene [LDPE] and virtually impermeable film [VIF] mulch) and six rates of allyl isothiocyanate (0, 15, 75, 150, 750, 1,500 kg ha−1). Additionally, a standard treatment of methyl bromide/chloropicrin (67 : 33%) at 390 kg ha−1 under LDPE mulch was included for comparison. Bell pepper injury was < 3% in all treatments, except 11% injury at 1,500 kg ha−1 allyl isothiocyanate under VIF mulch at 2 wk after transplanting (WATP). VIF mulch did not provide additional weed control and marketable pepper yield over LDPE mulch. Allyl isothiocyanate at 932 (± 127) kg ha−1 controlled yellow nutsedge (90%), Palmer amaranth (97%), and large crabgrass (92%) through 6 WATP and maintained the marketable yield equivalent to methyl bromide treatment. This research demonstrates that allyl ITC under an LDPE mulch can serve as a potential alternative to methyl bromide for weed control in polyethylene-mulched bell pepper.

Weed Control with Reduced Rates of Chlorimuron Plus Metribuzin and Imazethapyr in No-Till Narrow-Row Soybean (Glycine max)

1998 ◽  
Vol 12 (1) ◽  
pp. 32-36 ◽  
Author(s):  
William G. Johnson ◽  
Jeffrey S. Dilbeck ◽  
Michael S. Defelice ◽  
J. Andrew Kendig
Keyword(s):  
Glycine Max ◽  
Weed Control ◽  
Field Studies ◽  
Weed Suppression ◽  
Crop Response ◽  
Soybean Production ◽  
No Till ◽  
Giant Foxtail ◽  
The Difference ◽  
Narrow Row

Field studies were conducted at three locations in 1993 and 1994 to evaluate weed control and crop response to combinations of glyphosate, metolachlor, 0.5 X and 1 X label rates of chlorimuron plus metribuzin applied prior to planting (PP), and 0.5 X and 1 X label rates of imazethapyr applied early postemergence (EPOST) or postemergence (POST) in no-till narrow-row soybean production. Giant foxtail densities were reduced with sequential PP followed by (fb) EPOST or POST treatments. Large crabgrass was reduced equivalently with all herbicide combinations involving chlorimuron plus metribuzin PP fb imazethapyr. Common cocklebur control was variable but was usually greater with treatments that included imazethapyr. Ivyleaf morningglory densities were not reduced with any herbicide combinations. Sequential PP fb EPOST or POST treatments tended to provide slightly better weed suppression than PP-only treatments, but the difference was rarely significant. Soybean yields with treatments utilizing 0.5 X rates were usually equal to 1 X rates.

Improving sheep production and welfare in extensive systems through precision sheep management

2012 ◽  
Vol 52 (7) ◽  
pp. 665 ◽  
Author(s):  
Jessica E. Morris ◽  
Greg M. Cronin ◽  
Russell D. Bush
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Production Efficiency ◽  
Sheep Industry ◽  
Monitoring Frequency ◽  
Frequency Identification ◽  
Australian Sheep ◽  
Sheep Production ◽  
The Cost ◽  
Improve Production Efficiency

This overview discusses how precision sheep management could be utilised in the Australian sheep industry to improve production efficiency and reduce animal welfare concerns due to low monitoring frequency by stockpeople. The concept of precision sheep management is described. This is a system in which sheep are managed as individuals or small groups rather than as a (whole) flock. Precision sheep management utilises the application of radio frequency identification technology, enabling producers to better monitor sheep in extensive situations, and contribute to improved efficiency of management and sheep welfare. Examples of combining radio frequency identification with other technologies such as walk-over-weighing and Pedigree Matchmaker are discussed. These technologies provide producers with tools to improve the cost effectiveness of, and labour efficiency associated with, collecting data on individual animals. The combined technologies should also improve consistency and reliability of information, enhancing decision-making by producers, for example, from regular monitoring of biometric variables such as liveweight, or calculating breeding values to enable superior genetic comparisons over time.

scholarly journals Effects of different methods to control the parasitic weed Phelipanche ramosa (L.) Pomel in processing tomato crops

2016 ◽  
Vol 10 (1s) ◽  
pp. 39 ◽  
Author(s):  
Grazia Disciglio ◽  
Francesco Lops ◽  
Antonia Carlucci ◽  
Giuseppe Gatta ◽  
Annalisa Tarantino ◽  
...  
Keyword(s):  
Control Strategies ◽  
Block Design ◽  
Soluble Solids ◽  
Marketable Yield ◽  
Department Of Agriculture ◽  
Parasitic Weed ◽  
Complete Control ◽  
Tomato Plants ◽  
Processing Tomato ◽  
Phelipanche Ramosa

The root-parasitic weed <em>Phelipanche ramosa</em> (L.) Pomel represents a major problem for processing tomato crops. The control of this holoparasitic plant is difficult, and better understanding of treatment methods is needed to develop new and specific control strategies. This study investigated 12 agronomic, chemical, biological and biotechnological strategies for the control of this parasitic weed, in comparison with the untreated situation. The trial was carried out in 2014 at the Department of Agriculture, Food and the Environment of the University of Foggia (southern Italy), using processing tomato plants grown in pots filled with soil from a field that was heavily infested with <em>P. ramosa</em>. After transplantation, top dressing was performed with 70 kg ha<sup>–1</sup> nitrogen. A randomised block design with 3 replicates (pots) was adopted. During the growing cycle of the tomato, at 70, 75, 81 and 88 days after transplantation, the number of parasitic shoots (branched plants) that had emerged in each pot was determined, and the leaf chlorophyll of the plants was measured using a soil-plantanalysis- development meter. At harvesting on 8 August 2014, the major quanti-qualitative yield parameters were determined, including marketable yield, mean weight, dry matter, soluble solids, and fruit colour. The results show lower chlorophyll levels in the parasitised tomato plants, compared to healthy plants. None of the treatments provided complete control against P. ramosa. However, among the methods tested, Radicon® biostimulant (Radicon, Inc., Elk Grove Village, IL, USA), compost activated with <em>Fusarium oxysporum</em>, nitrogen and sulphur mineral fertilisers, Enzone<sup>TM</sup> soil fumigant (Elliott Chemicals Ltd., Auckland, New Zealand), and a resistant tomato genotype mitigated the virulence of the attacks of this parasite. These effects should be improved by combining some of these treatments, especially for gradual and continued reduction in the <em>seed bank</em> of the parasite in the soil. For the tomato yields across the different treatments, there were no significant differences seen; however, the yields showed an improving trend for treatments with lower presence of the <em>P. ramosa</em> weed.

Sign in / Sign up

Export Citation Format

Share Document