OCCUPATIONAL HEALTH AND SAFETY TRAINING: KNOWLEDGE, ATTITUDE AND PRACTICE AMONG TECHNICAL EDUCATION STUDENTS

2014 ◽  
Vol 38 (2) ◽  
pp. 153-165 ◽  
Author(s):  
Mostafa NS ◽  
Momen M
2020 ◽  
Vol 1 (2) ◽  
pp. 64-70
Author(s):  
Rezky Fajar Ramadhan

Abstrak: Tujuan penelitian ini adalah untuk mendeskripsikan penggunaan peralatan Kesehatan dan Keselamatan Kerja (K3) pada Mata Kuliah Praktikum Proses Produksi mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya. Jenis penelitian ini adalah deskriptif. Teknik pengumpulan data menggunakan teknik angket dan dokumentasi. Objek penelitian adalah seluruh mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya yang memprogramkan Mata Kuliah Praktikum Proses Produksi. Hasil penelitian ini menunjukkan bahwa 43% mahasiswa menyatakan sangat baik dan 57% mahasiswa menyatakan baik penggunaan peralatan K3 pada Mata Kuliah Praktikum Proses Produksi. Sehingga, disimpulkan bahwa penerapan K3 dapat mendukung pelaksanaan praktikum proses produksi.   Abstract: The purpose of this study was to describe the use of Occupational Health and Safety (OHS) equipment in the Production Process Practicum Subject of Mechanical Engineering Education students, Palangka Raya University. This type of research was descriptive. Data collection techniques used questionnaires and documentation. The object of research was all students of Mechanical Engineering Education, Palangkaraya University who programed Production Process Practicum Subjects. The results of this study indicate that 43% of students stated very well and 57% of students stated good use of OHS equipment in the Production Process Practicum Course. Thus, it was concluded that the application of OHS can support the implementation of practicum in the production process.


2019 ◽  
Vol 67 (9) ◽  
pp. 452-460
Author(s):  
Müberra Devrim Güner ◽  
Perihan Elif Ekmekci

Health literacy (HL) is a stronger predictor of an individual’s health status than income, employment status, education level, and race or ethnicity. Lower levels of HL may contribute to low uptake or less adherence to occupational health and safety (OHS) training. This study was conducted among casting factory workers who received OHS training routinely. Data on sociodemographic characteristics, OHS training, and scores of the Health Literacy Survey–European Union (HLS-EU) were collected. Of the 282 of the 600 (47%) workers surveyed, 13.5% had inadequate, 47.5% problematic, 30.9% sufficient, and 8.2% excellent HL scores. There were no statistically significant differences between workers with limited and proficient HL with respect to age group or educational level. Workers with limited HL were less satisfied with OHS training content and were less likely to identify one-on-one health and safety training sessions as training. Limited HL is a universal problem both in the general and working populations, and it may be restricting the workers understanding of OHS training. Occupational health nurses should be aware of the detrimental effects of limited HL and modify their OHS training where needed for purposes of increasing the successful adoption of safe work practices.


2014 ◽  
Vol 48 (3) ◽  
pp. 605-611 ◽  
Author(s):  
Clayton Sinyai ◽  
Pete Stafford ◽  
Chris Trahan

Many labour organizations that sponsor occupational health and safety training champion “peer training,” preferring instructors drawn from the shopfloor over academically credentialed experts. But peer training is hardly new: in the skilled trades, master craftsmen have instructed apprentices since the Middle Ages. Building on the apprenticeship model of education, the U.S.-based construction unions have created a network of more than 4,000 peer trainers who provide occupational health and safety training to up to 100,000 men and women in the building trades each year.


Author(s):  
Joanna Bartnicka ◽  
Patrycja Kabiesz ◽  
Dorota Palka ◽  
Paulina Gajewska ◽  
Ejaz Ul Islam ◽  
...  

With the advent of the COVID-19 pandemic, companies had to adapt quickly to survive in the market. During this time, employers played a key role, along with employees involved in Occupational Health and Safety (OHS) activities, as they were responsible for implementing the recommendations of the European Commission. There is no unambiguous definition of OHS in Polish legislation. It is assumed that it is a set of rules defining the manner of performing work, and above all, a method of providing employees with working conditions so that their performance is safe and hygienic. Responsibility for the health and safety in the workplace is imposed on the employer by the legislature. Thus, effective health and safety training is an essential element of the success of any properly operating company. In the literature, no studies have been identified that evaluate the effectiveness of actions during the COVID-19 outbreak. The aim of the article is to present the actions of Polish employers along with their effectiveness assessment related to the protection of employees during the COVID-19 outbreak. The article presents a proposal for conducting remote OHS (Occupational Health and Safety) training using the platform Moodle. The created course was implemented during OHS training conducted in a selected manufacturing company. At its end, an evaluation of the course was carried out, and the collected opinions of training participants allowed the formulation of interesting conclusions, which became the contribution of this paper. The authors pay special attention to three main points of the work. The first is the form of training, which gives the possibility to conduct training at a distance while maintaining its effectiveness. The second important point is the mandatory feedback of the trainees, ensuring the possibility of continuous improvement and quality enhancement of both the program and the form of training. The evaluation was developed on the basis of the extended Kirkpatrick model, which is a completely new approach to OHS training evaluation. The third point emphasized by the authors is the possibility of precise adaptation of the training to other plants and even industries. Therefore, it can be concluded that the course developed by the authors is a very interesting and practical didactic tool with great implementation potential.


Author(s):  
Sebastian Felix Rauh ◽  
Marius Koller ◽  
Philip Schäfer ◽  
Gerrit Meixner ◽  
Cristian Bogdan ◽  
...  

The current generation of dedicated Mixed Reality (MR) devices can be considered as the first generation, which is truly mobile while also being capable of sufficient tracking and rendering. These improvements offer new opportunities for the on-set use of MR devices enabling new ways of using MR. However, these new use cases raise challenges for the design and orchestration of MR applications as well as how these new technologies influence their field of application. In this paper, we present MR On-SeT, a MR occupational health and safety training application, which is based on the experiences of an operational division of a world-wide operating German company. The intended purpose of MR On-SeT is to increase employees’ awareness of potential hazards at industrial workplaces by using it in occupational health and safety training sessions. Since the application is used at various locations throughout the company’s world-wide subsidiaries, we were able to evaluate it through an expert survey with the occupational health and safety managers of seven plants in France, Germany, Japan, and Romania. They reported the condensed experience of around 540 training sessions collected within three months. The purpose of the evaluation was twofold: 1. to understand their perceived attitudes towards the application-in-use, and 2. to collect feedback they received from respondents in training sessions. The results suggest that MR On-SeT can be used to extend current, predominantly theoretical, methods of teaching occupational health and safety at work, which also motivates existing employees to actively engage in the training sessions. Based on the findings, several further design implications are proposed.


2016 ◽  
Vol 1 (2) ◽  
pp. 80
Author(s):  
Rini Riestiany ◽  
Ratih Maria Dhewi ◽  
Sjafri Mangkuprawira

<p><em>Employee is an important resource to have production process in a big factory. Factory couldn’t operate without employee. To protect their employees, the leader makes a policy like occupational health and safety. This policy for protect their employee from risk of bad accident and illness that causes of work. Bad accident can strike employee anywhere and anytime so this cases must to have a special attention. So, the leader, government, and management must pay attention to this risk.  Work accident leaning influence to manpower productivity because quality of work life and guarantee of occupational health and safety influence manpower productivity. PT Indocement Tunggal Prakarsa, Tbk is one of the biggest cement factories in Indonesia. This factory has applicated occupational health and safety assessment base on Permenaker No. 05/MEN/1996 and OHSAS 18001. Occupational health and safety effectiveness can describe by six aspect based on Miner Theory. That theory are safety training,</em><em> </em><em>safety publication, control to work</em><em> </em><em>environment, inspection and discipline, improvement awareness of occupational health and safety, report and statistic of occupational health and safety. Five aspect of Theory Miner, can describe by employee perspective, even report and statistic of occupational health and safety can describe by secondary data from Safety Department and Management Representative of PT ITP.</em></p>


Sign in / Sign up

Export Citation Format

Share Document