PEMANFAATAN PERALATAN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PRAKTIKUM PROSES PRODUKSI

Abstrak: Tujuan penelitian ini adalah untuk mendeskripsikan penggunaan peralatan Kesehatan dan Keselamatan Kerja (K3) pada Mata Kuliah Praktikum Proses Produksi mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya. Jenis penelitian ini adalah deskriptif. Teknik pengumpulan data menggunakan teknik angket dan dokumentasi. Objek penelitian adalah seluruh mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya yang memprogramkan Mata Kuliah Praktikum Proses Produksi. Hasil penelitian ini menunjukkan bahwa 43% mahasiswa menyatakan sangat baik dan 57% mahasiswa menyatakan baik penggunaan peralatan K3 pada Mata Kuliah Praktikum Proses Produksi. Sehingga, disimpulkan bahwa penerapan K3 dapat mendukung pelaksanaan praktikum proses produksi. Abstract: The purpose of this study was to describe the use of Occupational Health and Safety (OHS) equipment in the Production Process Practicum Subject of Mechanical Engineering Education students, Palangka Raya University. This type of research was descriptive. Data collection techniques used questionnaires and documentation. The object of research was all students of Mechanical Engineering Education, Palangkaraya University who programed Production Process Practicum Subjects. The results of this study indicate that 43% of students stated very well and 57% of students stated good use of OHS equipment in the Production Process Practicum Course. Thus, it was concluded that the application of OHS can support the implementation of practicum in the production process.

Download Full-text

Analisis Kesehatan Dan Keselamatan Kerja Menggunakan Failure Mode And Effect Analysis Di PT. XYZ

Jurnal Sistem Teknik Industri ◽

10.32734/jsti.v23i1.4959 ◽

2021 ◽

Vol 23 (1) ◽

pp. 46-58

Author(s):

Muhammad Ramadan ◽

Sukanta Sukanta ◽

Risma Fitriani

Keyword(s):

Occupational Health ◽

Production Process ◽

Health And Safety ◽

Occupational Health And Safety ◽

Risk Priority Number ◽

Effect Analysis ◽

Fmea Method ◽

Prime Condition ◽

A Company

Occupational Health and Safety (OHS) is important to maintain and improve so that the quality of human resources in the company is always in prime condition. Every company has a different level or level of Occupational Health and Safety (OHS). PT. XYZ is a company that uses corrosive materials, therefore Occupational Health and Safety (OHS) analyst at PT XYZ is needed. The Occupational Health and Safety (OHS) analysis carried out in this study used the FMEA method to determine which part of the production process had Occupational Health and Safety (OHS) that needed repair the most. From the research results, it was found that the highest Risk Priority Number (RPN) value was the pickling and degreasing production process.

Download Full-text

Overview of The Implementation of Occupational Health and Safety (OHS) in Preventing The Transmission of Covid 19 in PT PKUA Bogor West Java 2021

Muhammadiyah International Public Health and Medicine Proceeding ◽

10.53947/miphmp.v1i1.94 ◽

2021 ◽

Vol 1 (1) ◽

pp. 491-498

Author(s):

Wiwin Wiwin Listyowati

Keyword(s):

Data Collection ◽

Occupational Health ◽

Preventive Measures ◽

Health And Safety ◽

Secondary Data ◽

Occupational Health And Safety ◽

Industrial Workers ◽

Literature Study ◽

West Java ◽

Safety And Health

Since the pandemic that began in 2020, the industry in Indonesia has experienced enormous obstacles and has an impact on the industrial workers themselves, the Covid 19 infection rate in workers has reached 2 percent of the total number of infections in Indonesia and industrial areas. The purpose of this study was to see an overview of the application of occupational health and safety (OHS) in preventing the transmission of covid 19 at PT PKUA Bogor, West Java. The method used in this research is descriptive qualitative with data collection techniques through observation, literature study with secondary data, and interviews with employees of PT PKUA. The results obtained from this study are based on data from the company's OHS division and interviews with the Factory Manager, it is known that the number of workers infected with Covid 19 as of April 2021 was 8 people and those who were not infected were 119 people out of a total of 127 employees. The transmission that occurred within the company was not significant and there was no spread within the factory because the workers who were infected while on duty were out of town and did not form a factory cluster. In the company, from the HSE division report, it was found that employees were infected while on duty from out of town and came into contact with many people on their way to and from them. This research concludes that PT PKUA has done quite well to prevent the occurrence of factory clusters, the preventive measures taken have been in favor of the safety and health of industrial workers, especially in PT PKUA.

Download Full-text

OCCUPATIONAL HEALTH AND SAFETY TRAINING: KNOWLEDGE, ATTITUDE AND PRACTICE AMONG TECHNICAL EDUCATION STUDENTS

Egyptian Journal of Occupational Medicine ◽

10.21608/ejom.2014.795 ◽

2014 ◽

Vol 38 (2) ◽

pp. 153-165 ◽

Cited By ~ 4

Author(s):

Mostafa NS ◽

Momen M

Keyword(s):

Occupational Health ◽

Technical Education ◽

Health And Safety ◽

Occupational Health And Safety ◽

Safety Training ◽

Education Students ◽

Attitude And Practice ◽

Knowledge Attitude And Practice

Download Full-text

The pandemic and its impact on occupational health and safety among mechanical engineering industries in India

The Journal of Community Health Management ◽

10.18231/j.jchm.2021.043 ◽

2022 ◽

Vol 8 (4) ◽

pp. 202-204

Author(s):

Donald S Christian ◽

Anjela D Christian

Keyword(s):

Occupational Health ◽

Mechanical Engineering ◽

Close Contact ◽

Health And Safety ◽

Occupational Health And Safety ◽

Workplace Health ◽

New Normal ◽

Mechanical Field ◽

Workplace Health And Safety ◽

Engineering Industries

Workplace health and safety has been of paramount importance for any nation and the stakeholders- authorities, employers and workers – must have reasonable sensitization for the same. During the COVID 19 pandemic, lots of policy formulations and regulations had to incorporate within the industries for the health and welfare of the workers. The “new normal” will take some time for adjustments, challenges and implications to be implemented effectively and consistently. Certain processes in the workplace, especially in the mechanical engineering companies, are likely for high close contact incidences. Special situations pertaining to workers’’ health, like crowded accommodations, travel risks as well common canteens, all need to be reconsidered for providing safer environment to the workers, as far as the current pandemic is concerned. This requires coordinated efforts from all the stakeholders within the mechanical field through subconscious acceptance of the norms of safety and hygiene at all levels.

Download Full-text

A Community Intervention In Covid-19 Pandemic: Occupational Health And Safety For Moslem Online Transportation

Psikis Jurnal Psikologi Islami ◽

10.19109/psikis.v7i2.10138 ◽

2021 ◽

Vol 7 (2) ◽

pp. 161-168

Author(s):

Yanwar Arief ◽

Muhammad Rizki Fauji ◽

Robby Fernanda Arifin ◽

Bahril Hidayat

Keyword(s):

Data Collection ◽

Occupational Health ◽

Community Intervention ◽

Health And Safety ◽

Occupational Health And Safety ◽

Digital Videos ◽

Person Questionnaire

This study was conducted to see the implementation of community intervention the Gojek Online Occupational Health and Safety (OHS) online bike during the coronavirus disease (Covid-19) pandemic in Pekanbaru City, and to provide online bike drivers with psychoeducation interventions. Main data collection by observation to see the introduction of occupational health and safety (OHS) of the Gojek online bike and questionnaires to take a look at the results of the interventions. Results from the observations made by 15 drivers indicate that the application of occupational health and safety (OHS) was 59%. The results of the 15-person questionnaire on the benefits of the intervention given are 81%. Therefore, psychoeducation interventions in the form of posters and digital videos are successful and provide advantages in the implementation of online bike occupational health and safety (OHS) Gojek during the pandemic in Pekanbaru City.

Download Full-text