Five years operation of a decentralized membrane bioreactor package plant treating domestic wastewater

2014 ◽  
Vol 9 (2) ◽  
pp. 206-214 ◽  
Author(s):  
C. S. Tai ◽  
J. Snider-Nevin ◽  
J. Dragasevich ◽  
J. Kempson
Keyword(s):  
Wastewater Treatment ◽  
Membrane Bioreactor ◽  
Water Discharge ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Surface Discharge ◽  
Small Community ◽  
Effluent Quality ◽  
Decentralized Wastewater Treatment

Membrane bioreactor (MBR) package systems are providing affordable and simple-to-use decentralized wastewater treatment solutions for small to medium sized communities that face the challenge of balancing environmental and regulatory responsibilities with budgetary limitations. With a greater confidence and understanding of MBR technology, there is an increasing incentive in using MBR technology for these types of applications. Furthermore, valued qualities such as compact footprint, quick installation and start-up, process reliability, ease of operation, and superior effluent quality suitable for direct surface discharge and water reclamation have made MBR package system a preferred solution for decentralized wastewater treatment applications. This paper presents a retrofit solution for the Whitehouse Terrace Wastewater Treatment Plant. The existing extended aeration activated sludge package plant was retrofitted with a pre-engineered newterra MicroClearTM MBR package system for a small community along St Lawrence River in Brockville, Ontario. Five years full scale operation data of the MBR package system is presented and it is evident that the MBR package system consistently delivered high quality effluent that is far better than the required limit for direct surface water discharge to the St. Lawrence's river, with average effluent quality of 2.4, 2.6, 0.5, 0.05 mg/L, 1.7 counts/100 mL and 7.4 for biochemical oxygen demand, TSS, TP, TAN, Escherichia coli and pH, respectively.

scholarly journals Woven-Fiber Microfiltration (WFMF) and Ultraviolet Light Emitting Diodes (UV LEDs) for Treating Wastewater and Septic Tank Effluent

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1564
Author(s):  
Sara Beck ◽  
Poonyanooch Suwan ◽  
Thusitha Rathnayeke ◽  
Thi Nguyen ◽  
Victor Huanambal-Sovero ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Light Emitting Diodes ◽  
Domestic Wastewater ◽  
Septic Tank ◽  
Uv Disinfection ◽  
Small Community ◽  
Photochemical Process ◽  
Light Emitting ◽  
Decentralized Wastewater Treatment ◽  
Septic Tank Effluent

Decentralized wastewater treatment systems enable wastewater to be treated at the source for cleaner discharge into the environment, protecting public health while allowing for reuse for agricultural and other purposes. This study, conducted in Thailand, investigated a decentralized wastewater treatment system incorporating a physical and photochemical process. Domestic wastewater from a university campus and conventional septic tank effluent from a small community were filtered through a woven-fiber microfiltration (WFMF) membrane as pretreatment for ultraviolet (UV) disinfection. In domestic wastewater, WFMF reduced TSS (by 79.8%), turbidity (76.5%), COD (38.5%), and NO3 (41.4%), meeting Thailand irrigation standards for every parameter except BOD. In septic tank effluent, it did not meet Thailand irrigation standards, but reduced TSS (by 77.9%), COD (37.6%), and TKN (13.5%). Bacteria (total coliform and Escherichia coli) and viruses (MS2 bacteriophage) passing through the membrane were disinfected by flow-through UV reactors containing either a low-pressure mercury lamp or light-emitting diodes (LEDs) emitting an average peak wavelength of 276 nm. Despite challenging and variable water quality conditions (2% < UVT < 88%), disinfection was predictable across water types and flow rates for both UV sources using combined variable modeling, which enabled us to estimate log inactivation of other microorganisms. Following UV disinfection, wastewater quality met the WHO standards for unrestricted irrigation.

scholarly journals Use of a duckweed pond for the domestic wastewater polishing in Ilha Solteira, SP, Brazil

2017 ◽  
Vol 28 (4) ◽  
pp. 477-489 ◽  
Author(s):  
Daiane Cristina de Oliveira Garcia ◽  
Liliane Lazzari Albertin ◽  
Tsunao Matsumoto
Keyword(s):  
Wastewater Treatment ◽  
Biomass Production ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Treatment System ◽  
Content Type ◽  
Stabilization Pond ◽  
Domestic Effluent ◽  
Duckweed Pond

Purpose The purpose of this paper is to evaluate the efficiency of a duckweed pond in the polishing of a stabilization pond effluent, as well as quantify its biomass production. Once an adequate destination is given to the produced biomass, the wastewater treatment plant can work in a sustainable and integrated way. Design/methodology/approach The duckweed pond consisted of a tank with volume 0.44 m3, operating in continuous flow with an outflow of 0.12 m3/day and hydraulic retention time of 3.8 days. Effluent samples were collected before and after the treatment, with analyzes made: daily-pH, dissolved oxygen and temperature; twice a week – total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD); and weekly – total solids (TS) and Biochemical Oxygen Demand (BOD5). The duckweeds were collected each for seven days for its production quantification. Findings The highest efficiency of TN, TP, COD, BOD5 and TS removal were of 74.67, 66.18, 88.12, 91.14 and 48.9 percent, respectively. The highest biomass production rate was 10.33 g/m2/day in dry mass. Research limitations/implications There was great variation in biomass production, which may be related to the stabilization pond effluent conditions. The evaluation of the effluent composition, which will be treated with duckweeds, is recommended. Practical implications The evaluated treatment system obtained positive results for the reduction in the analyzed variables concentration, being an efficient technology and with operational simplicity for the domestic effluent polishing. Originality/value The motivation of this work was to bring a simple system of treatment and to give value to a domestic wastewater treatment system in a way that, at the same time the effluent polluter level is reduced and it is also possible to produce biomass during the treatment process.

scholarly journals Efficiency of Multi Soil Layering (MSL) System in A Household Scale of Wastewater Treatment Using Environmental Friendly Materials

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Badrus Zaman ◽  
Wiharyanto Oktiawan
Keyword(s):  
Wastewater Treatment ◽  
Treatment Plant ◽  
Domestic Wastewater ◽  
Quality Standards ◽  
Environmental Damage ◽  
Effluent Quality ◽  
Soil Layering ◽  
The First Variation ◽  
The Second Variation ◽  
Required Quality

Most community settlements in Indonesia do not have a household scale of a wastewater treatment plant. Fatal impacts on the environment and human health can occur at any time, including (a) causing environmental damage (disaster), (b) damaging beauty/aesthetics for the scenery will be unpleasant and foul-smelling, (c) polluting water bodies, and (d ) endangering health. The purpose of this study is to optimize the Multi Soil Layering (MSL) System to treat domestic wastewater (greywater) using environmentally friendly materials that are available in Indonesia. The research method used the MSL system with the first variation using a batch system with Hydraulic retention time (HRT) for 24 hours and the second variation using an intermittent system with 3, 6, 9 hours HRT. The results showed that the MSL system was able to eliminate COD well. The highest COD removal efficiency was 93.44% at 9 hours HRT, but the effluent quality did not meet the required quality standards. The development of MSL systems that produces an effluent quality that meets the quality standards needs to be studied further.

Domestic wastewater treatment by real-scale electrocoagulation process

2020 ◽  
Vol 81 (4) ◽  
pp. 656-667 ◽  
Author(s):  
Serdar Koyuncu ◽  
Sema Arıman
Keyword(s):  
Wastewater Treatment ◽  
Operating Cost ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Urban Wastewater ◽  
Electrocoagulation Process ◽  
Removal Efficiencies ◽  
Urban Wastewater Treatment ◽  
Real Scale

Abstract In this study, domestic wastewaters originating from a settlement with a population of 17,500 were treated by electrocoagulation process in a real-scale EC plant and the economic applicability of the process was investigated. The removal efficiencies of control parameters in the influent and effluent of the real-scale treatment plant such as suspended solids (SS), biological oxygen demand (BOD), chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP) and changes of pH and conductivity parameters were monitored for 12 months. The obtained data were evaluated according to European Urban Wastewater Treatment Directive, Turkish Water Pollution Control Regulation and Turkish Urban Wastewater Treatment Regulation. According to the results obtained, the removal efficiencies of the pollutant parameters were achieved in the range of 72–83% for SS, 67–80% for COD, 69–81% for BOD, 21–47% for TN and 27–46% for TP. Considering the Turkish wastewater discharge regulations, it can be concluded that the discharge standards for SS, COD and BOD parameters were achieved while they were not achieved in certain periods for TN and TP. In addition, the energy consumption and the operating cost of this real-scale plant were determined to be 0.49–0.54 kWh/m3 and 0.24–0.28 EUR/m3, respectively.

Comparative study of membrane bioreactor (MBR) and activated sludge processes in the treatment of Moroccan domestic wastewater

2018 ◽  
Vol 78 (5) ◽  
pp. 1129-1136 ◽  
Author(s):  
S. Kitanou ◽  
M. Tahri ◽  
B. Bachiri ◽  
M. Mahi ◽  
M. Hafsi ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Membrane Bioreactor ◽  
Ceramic Membrane ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Pilot Scale ◽  
Quality Parameters ◽  
Effluent Quality ◽  
Conventional Activated Sludge ◽  
Activated Sludge Processes

Abstract The study was based on an external pilot-scale membrane bioreactor (MBR) with a ceramic membrane compared to a conventional activated sludge process (ASP) plant. Both systems received their influent from domestic wastewater. The MBR produced an effluent of much better quality than the ASP in terms of total suspended solids (TSS), 5-day biological oxygen demand (BOD5) and chemical oxygen demand (COD), total phosphorus (TP) and total nitrogen (TN). Other effluent quality parameters also indicated substantial differences between the ASP and the MBR. This study leads to the conclusion that in the case of domestic wastewater, MBR treatment leads to excellent effluent quality. Hence, the replacement of ASP by MBR may be justified on the basis of the improved removal of solids, nutrients, and micropollutants. Furthermore, in terms of reuse the high quality of the treated water allows it to be reused for irrigation.

ANFIS Modelling of Carbon and Nitrogen Removal in Domestic Wastewater Treatment Plant

2014 ◽  
Vol 67 (5) ◽  
Author(s):  
Muhammad Sani Gaya ◽  
N. Abdul Wahab ◽  
Y. M. Sam ◽  
Sahratul Izah Samsudin
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Feed Forward Neural Network ◽  
Anfis Model ◽  
Efficient Operation ◽  
Carbon And Nitrogen

Wastewater treatment plant involves highly complex and uncertain processes, which are quite difficult to forecast. However, smooth and efficient operation of the treatment plant depends on an appropriate model capable of describing accurately the dynamic nature of the system. Most of the existing models were applied to industrial wastewater treatment plants. Therefore, this paper proposed an ANFIS model for carbon and nitrogen removal in the Bunus regional sewage wastewater treatment plant, Kuala Lumpur, Malaysia. For comparison, feed-forward neural network is used. Simulation results revealed that the ANFIS model demonstrated slightly better prediction capability in all the considered variables, chemical oxygen demand (COD), suspended solids (SS) and ammonium nitrogen (NH4-N) as compared to the FFNN model, thus proving that the proposed ANFIS model is reliable and useful to the wastewater treatment plant. 

Engineered ecosystem for on-site wastewater treatment in tropical areas

2012 ◽  
Vol 66 (10) ◽  
pp. 2131-2137 ◽  
Author(s):  
André Luis de Sá Salomão ◽  
Marcia Marques ◽  
Raul Gonçalves Severo ◽  
Odir Clécio da Cruz Roque
Keyword(s):  
Wastewater Treatment ◽  
Aquatic Macrophytes ◽  
Suspended Solids ◽  
Treatment Options ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Septic Tank ◽  
Decentralized Wastewater Treatment ◽  
Tropical Areas ◽  
Aerated Filter

There is a worldwide demand for decentralized wastewater treatment options. An on-site engineered ecosystem (EE) treatment plant was designed with a multistage approach for small wastewater generators in tropical areas. The array of treatment units included a septic tank, a submersed aerated filter, and a secondary decanter followed by three vegetated tanks containing aquatic macrophytes intercalated with one tank of algae. During 11 months of operation with a flow rate of 52 L h−1, the system removed on average 93.2% and 92.9% of the chemical oxygen demand (COD) and volatile suspended solids (VSS) reaching final concentrations of 36.3 ± 12.7 and 13.7 ± 4.2 mg L−1, respectively. Regarding ammonia-N (NH4-N) and total phosphorus (TP), the system removed on average 69.8% and 54.5% with final concentrations of 18.8 ± 9.3 and 14.0 ± 2.5 mg L−1, respectively. The tanks with algae and macrophytes together contributed to the overall nutrient removal with 33.6% for NH4-N and 26.4% for TP. The final concentrations for all parameters except TP met the discharge threshold limits established by Brazilian and EU legislation. The EE was considered appropriate for the purpose for which it was created.

High strength domestic wastewater treatment with submerged forward osmosis membrane bioreactor

2015 ◽  
Vol 72 (1) ◽  
pp. 141-149 ◽  
Author(s):  
Bilal Aftab ◽  
Sher Jamal Khan ◽  
Tahir Maqbool ◽  
Nicholas P. Hankins
Keyword(s):  
Wastewater Treatment ◽  
Membrane Bioreactor ◽  
Forward Osmosis ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
High Strength ◽  
Feed Solution ◽  
Cellulose Triacetate ◽  
Organic Content ◽  
Operational Conditions

Abstract Forward osmosis membranes are less prone to fouling with high rejection of salts, and the osmotic membrane bioreactor (OMBR) can be considered as an innovative membrane technology for wastewater treatment. In this study, a submerged OMBR having a cellulose triacetate membrane, with the active layer facing the feed solution configuration, was operated at different organic loading rates (OLRs), i.e., 0.4, 1.2 and 2.0 kg-COD/(m3·d) with chemical oxygen demand (COD) concentrations of 200 mg/L, 600 mg/L and 1,000 mg/L, respectively, to evaluate the performance on varying wastewater strengths. High organic content with sufficient amount of nutrients enhanced the biomass growth. High OLR caused more extrapolymeric substances production and less dewaterability. However, no significant differences in fouling trends and flux rates were observed among different OLR operational conditions.

scholarly journals Domestic Wastewater Treatment: A Comparison between an Integrated Hybrid UASB-IFAS System and a Conventional UASB-AS System

2021 ◽  
Vol 13 (4) ◽  
pp. 1853
Author(s):  
Ayman M. Dohdoh ◽  
Ibrahim Hendy ◽  
Martina Zelenakova ◽  
Ahmed Abdo
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
High Efficiency ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Pilot Scale ◽  
Climatic Conditions ◽  
Upflow Anaerobic Sludge Blanket ◽  
Anaerobic Sludge

The current study presents a detailed evaluation and comparison between two integrated anaerobic–aerobic systems for biological wastewater treatment under equal conditions in all aspects (wastewater characteristics, climatic conditions, reactor sizing, and even the measurement methods). The two examined systems are (i) a hybrid upflow anaerobic sludge blanket (hybrid UASB) coupled with integrated fixed-film activated sludge (IFAS) and (ii) a conventional UASB coupled with activated sludge (AS). The present comparative study aims to evaluate and assess the effect of adding carrier-filling media on the performance of the classical integrated UASB-AS. The two parallel pilot-scale systems, hybrid UASB-IFAS and UASB-AS, were installed and operated at a wastewater treatment plant. Three sets of experiments were conducted to examine the influence of the hydraulic retention time (HRT) on the consequent organic and hydraulic loads, temperature, and recirculation rate of the proposed systems. The main results showed that the two investigated systems had a comparably high efficiency for the removal of organic matters and ammonia. Moreover, a paired sample t-test indicated there was a statistically significant effect of the filling media, and the performance of the hybrid UASB-IFAS increased significantly compared with that of the UASB-AS system. An additional benefit of the filling media on the hybrid system was its high stability when changing the organic and hydraulic loads. The optimum HRT was 6 h, with a total chemical oxygen demand (TCOD) percentage removal of approximately 95% in both examined systems. Treatment of sewage under high and low temperatures indicated that increasing the temperature improved the efficiency of the overall process for both systems significantly.

Sign in / Sign up

Export Citation Format

Share Document