scholarly journals Flow measurements in sewers based on image analysis: automatic flow velocity algorithm

2011 ◽  
Vol 64 (5) ◽  
pp. 1108-1114 ◽  
Author(s):  
D. Jeanbourquin ◽  
D. Sage ◽  
L. Nguyen ◽  
B. Schaeli ◽  
S. Kayal ◽  
...  
Keyword(s):  
Image Processing ◽  
Flow Velocity ◽  
Combined Sewer Overflows ◽  
Flow Measurements ◽  
Web Based ◽  
Flow Monitoring ◽  
Tier System ◽  
On Line ◽  
Rain Events ◽  
Processing Techniques

Discharges of combined sewer overflows (CSOs) and stormwater are recognized as an important source of environmental contamination. However, the harsh sewer environment and particular hydraulic conditions during rain events reduce the reliability of traditional flow measurement probes. An in situ system for sewer water flow monitoring based on video images was evaluated. Algorithms to determine water velocities were developed based on image-processing techniques. The image-based water velocity algorithm identifies surface features and measures their positions with respect to real world coordinates. A web-based user interface and a three-tier system architecture enable remote configuration of the cameras and the image-processing algorithms in order to calculate automatically flow velocity on-line. Results of investigations conducted in a CSO are presented. The system was found to measure reliably water velocities, thereby providing the means to understand particular hydraulic behaviors.

scholarly journals Vision-based system for the control and measurement of wastewater flow rate in sewer systems

2009 ◽  
Vol 60 (9) ◽  
pp. 2281-2289 ◽  
Author(s):  
L. S. Nguyen ◽  
B. Schaeli ◽  
D. Sage ◽  
S. Kayal ◽  
D. Jeanbourquin ◽  
...  
Keyword(s):  
Image Processing ◽  
Water Level ◽  
Water Levels ◽  
Combined Sewer Overflows ◽  
Web Based ◽  
Tier System ◽  
Crucial Information ◽  
Rain Events ◽  
Processing Techniques

Combined sewer overflows and stormwater discharges represent an important source of contamination to the environment. However, the harsh environment inside sewers and particular hydraulic conditions during rain events reduce the reliability of traditional flow measurement probes. In the following, we present and evaluate an in situ system for the monitoring of water flow in sewers based on video images. This paper focuses on the measurement of the water level based on image-processing techniques. The developed image-based water level algorithms identify the wall/water interface from sewer images and measure its position with respect to real world coordinates. A web-based user interface and a 3-tier system architecture enable the remote configuration of the cameras and the image-processing algorithms. Images acquired and processed by our system were found to reliably measure water levels and thereby to provide crucial information leading to better understand particular hydraulic behaviors. In terms of robustness and accuracy, the water level algorithm provided equal or better results compared to traditional water level probes in three different in situ configurations.

An Overview of Digital Image Processing and Recognition (Invited Paper)

1982 ◽  
Vol 40 ◽  
pp. 700-702
Author(s):  
R. C. Gonzalez
Keyword(s):  
Image Processing ◽  
New York ◽  
Digital Image Processing ◽  
Digital Image ◽  
Practical Implementation ◽  
Submarine Cable ◽  
Vigorous Growth ◽  
Digitized Pictures ◽  
Processing Techniques ◽  
And Storage

Interest in digital image processing techniques dates back to the early 1920's, when digitized pictures of world news events were first transmitted by submarine cable between New York and London. Applications of digital image processing concepts, however, did not become widespread until the middle 1960's, when third-generation digital computers began to offer the speed and storage capabilities required for practical implementation of image processing algorithms. Since then, this area has experienced vigorous growth, having been a subject of interdisciplinary research in fields ranging from engineering and computer science to biology, chemistry, and medicine.

Specific Labeling of Protein Domains with Antibody Fragments

1981 ◽  
Vol 39 ◽  
pp. 416-417
Author(s):  
U. Aebi ◽  
L.E. Buhle ◽  
W.E. Fowler
Keyword(s):  
Image Processing ◽  
Specific Protein ◽  
Antibody Fragments ◽  
Supramolecular Organization ◽  
Two Dimensional ◽  
Ordered Structures ◽  
Virus Capsids ◽  
Processing Techniques

Many important supramolecular structures such as filaments, microtubules, virus capsids and certain membrane proteins and bacterial cell walls exist as ordered polymers or two-dimensional crystalline arrays in vivo. In several instances it has been possible to induce soluble proteins to form ordered polymers or two-dimensional crystalline arrays in vitro. In both cases a combination of electron microscopy of negatively stained specimens with analog or digital image processing techniques has proven extremely useful for elucidating the molecular and supramolecular organization of the constituent proteins. However from the reconstructed stain exclusion patterns it is often difficult to identify distinct stain excluding regions with specific protein subunits. To this end it has been demonstrated that in some cases this ambiguity can be resolved by a combination of stoichiometric labeling of the ordered structures with subunit-specific antibody fragments (e.g. Fab) and image processing of the electron micrographs recorded from labeled and unlabeled structures.

Software pattern recognition applied to nanodiffraction patterns from a STEM instrument

1986 ◽  
Vol 44 ◽  
pp. 694-695
Author(s):  
G.Y. Fan ◽  
J.M. Cowley
Keyword(s):  
Image Processing ◽  
Pattern Recognition ◽  
Computer Software ◽  
Processing System ◽  
Light Level ◽  
Host Computer ◽  
Low Light ◽  
Image Processing System ◽  
Recent Developments ◽  
On Line

In recent developments, the ASU HB5 has been modified so that the timing, positioning, and scanning of the finely focused electron probe can be entirely controlled by a host computer. This made the asynchronized handshake possible between the HB5 STEM and the image processing system which consists of host computer (PDP 11/34), DeAnza image processor (IP 5000) which is interfaced with a low-light level TV camera, array processor (AP 400) and various peripheral devices. This greatly facilitates the pattern recognition technique initiated by Monosmith and Cowley. Software called NANHB5 is under development which, instead of employing a set of photo-diodes to detect strong spots on a TV screen, uses various software techniques including on-line fast Fourier transform (FFT) to recognize patterns of greater complexity, taking advantage of the sophistication of our image processing system and the flexibility of computer software.

Three-Dimensional Structure of Rotavirus-Fab Complex

1990 ◽  
Vol 48 (1) ◽  
pp. 238-239
Author(s):  
B.V.V. Prasad ◽  
E. Marietta ◽  
J.W. Burns ◽  
M.K. Estes ◽  
W. Chiu
Keyword(s):  
Image Processing ◽  
Smooth Surface ◽  
Three Dimensional ◽  
Outer Shell ◽  
Dimensional Structure ◽  
Structural Studies ◽  
Cell Penetration ◽  
Electron Cryomicroscopy ◽  
Image Processing Techniques ◽  
Processing Techniques

Rotaviruses are spherical, double-shelled particles. They have been identified as a major cause of infantile gastroenteritis worldwide. In our earlier studies we determined the three-dimensional structures of double-and single-shelled simian rotavirus embedded in vitreous ice using electron cryomicroscopy and image processing techniques to a resolution of 40Å. A distinctive feature of the rotavirus structure is the presence of 132 large channels spanning across both the shells at all 5- and 6-coordinated positions of a T=13ℓ icosahedral lattice. The outer shell has 60 spikes emanating from its relatively smooth surface. The inner shell, in contrast, exhibits a bristly surface made of 260 morphological units at all local and strict 3-fold axes (Fig.l).The outer shell of rotavirus is made up of two proteins, VP4 and VP7. VP7, a glycoprotein and a neutralization antigen, is the major component. VP4 has been implicated in several important functions such as cell penetration, hemagglutination, neutralization and virulence. From our earlier studies we had proposed that the spikes correspond to VP4 and the rest of the surface is composed of VP7. Our recent structural studies, using the same techniques, with monoclonal antibodies specific to VP4 have established that surface spikes are made up of VP4.

A Survey on Detection and Classification of Brain Tumor Using Image Processing Techniques

2020 ◽  
pp. 967-973
Author(s):  
V. Deepika ◽  
T. Rajasenbagam
Keyword(s):  
Image Processing ◽  
Brain Tumor ◽  
Soft Tissues ◽  
Tumor Detection ◽  
Tumor Classification ◽  
Normal Brain ◽  
Image Processing Techniques ◽  
Normal Brain Function ◽  
Processing Techniques ◽  
The Brain

A brain tumor is an uncontrolled growth of abnormal brain tissue that can interfere with normal brain function. Although various methods have been developed for brain tumor classification, tumor detection and multiclass classification remain challenging due to the complex characteristics of the brain tumor. Brain tumor detection and classification are one of the most challenging and time-consuming tasks in the processing of medical images. MRI (Magnetic Resonance Imaging) is a visual imaging technique, which provides a information about the soft tissues of the human body, which helps identify the brain tumor. Proper diagnosis can prevent a patient's health to some extent. This paper presents a review of various detection and classification methods for brain tumor classification using image processing techniques.

Investigation of the influence of the flow structure on the accuracy of flow measurement before a hydrometric structure in an open channel

2020 ◽  
pp. 41-44
Author(s):  
Anatoly Kusher
Keyword(s):  
Velocity Profile ◽  
Flow Velocity ◽  
Water Flow ◽  
Flow Measurement ◽  
Water Discharge ◽  
Critical Depth ◽  
Flow Measurements ◽  
Study Results ◽  
Flow Velocity Profile ◽  
Upstream Flow

The reliability of water flow measurement in irrigational canals depends on the measurement method and design features of the flow-measuring structure and the upstream flow velocity profile. The flow velocity profile is a function of the channel geometry and wall roughness. The article presents the study results of the influence of the upstream flow velocity profile on the discharge measurement accuracy. For this, the physical and numerical modeling of two structures was carried out: a critical depth flume and a hydrometric overfall in a rectangular channel. According to the data of numerical simulation of the critical depth flume with a uniform and parabolic (1/7) velocity profile in the upstream channel, the values of water discharge differ very little from the experimental values in the laboratory model with a similar geometry (δ < 2 %). In contrast to the critical depth flume, a change in the velocity profile only due to an increase in the height of the bottom roughness by 3 mm causes a decrease of the overfall discharge coefficient by 4…5 %. According to the results of the numerical and physical modeling, it was found that an increase of backwater by hydrometric structure reduces the influence of the upstream flow velocity profile and increases the reliability of water flow measurements.

Sign in / Sign up

Export Citation Format

Share Document