scholarly journals Conversion of lignocellulosic agricultural wastes into adsorbents for pharmaceutical drugs

2019 ◽  
pp. 24-31
Author(s):  
Anca Cruceanu ◽  
Monica Alexandra Vaideanu ◽  
Rodica Zavoianu ◽  
Elena Bacalum ◽  
Octavian Dumitru Pavel
Keyword(s):  
Thermal Treatment ◽  
Carbon Content ◽  
Chemical Activation ◽  
Agricultural Wastes ◽  
Pharmaceutical Drugs ◽  
Adsorption Efficiency ◽  
Boehm Titration ◽  
The One ◽  
Amoxicillin Removal

Lignocellulosic agricultural wastes e.g. corn cobs, straws and corn stalks were converted into carbonaceous adsorbents using a sequence of thermal and chemical activation processes. The derived solids obtained after each type of activation were characterized by determination of fix carbon content, iodine number, Boehm titration and DRIFT spectrometry. The results obtained at the adsorption tests were well correlated to those of the characterization, showing that the most promising adsorbents for amoxicillin removal were those submitted to a thermal treatment followed by a chemical alkaline activation, followed by washing and a secondary thermal treatment. The most promising bio-based adsorbent was the one derived from corn stalks (90.6% adsorption efficiency).

scholarly journals Activated carbons from golden shower upon different chemical activation methods: Synthesis and characterizations

2017 ◽  
Vol 36 (1-2) ◽  
pp. 95-113 ◽  
Author(s):  
Hai Nguyen Tran ◽  
Huan-Ping Chao ◽  
Sheng-Jie You
Keyword(s):  
Thermal Stability ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Two Stage ◽  
One Stage ◽  
Crystal Properties ◽  
Boehm Titration ◽  
Stage Process ◽  
The One ◽  
Subsequent Chemical

Activated carbons (ACs) were synthesized from golden shower (GS) through chemical activation. Two synthesis processes were used: one-stage and two-stage processes. In the one-stage process, GS that was impregnated with K2CO3 was directly pyrolyzed (GSAC), and the two-stage process consisted of (1) pyrolytic or hydrolytic carbonization to produce biochar or hydrochar and (2) subsequent chemical activation was defined as GSBAC and GSHAC, respectively. The activated carbon’s characteristics—thermal stability and textural, physicochemical, structural, and crystal properties—were thoroughly investigated. Results demonstrated that the characteristics of activated carbons strongly depend on the method used for their synthesis. The Brunauer–Emmett–Teller surface area followed the order GSAC (1413 m2/g) > GSHAC (1238 m2/g) > GSBAC (812 m2/g). The existence of acidic groups was determined through Fourier transform infrared spectroscopy and Boehm titration. The excellent adsorptive capacities of the activated carbons were confirmed from the iodine number (1568–2695 mg/g) and methylene number (143–233 mg/g).

Two-Stage Procedure for the Quantitative Determination of Autoprothrombin III Concentration and Some Applications

1967 ◽  
Vol 18 (01/02) ◽  
pp. 198-210 ◽  
Author(s):  
Ronald S Reno ◽  
Walter H Seegers
Keyword(s):  
Prothrombin Time ◽  
Factor Vii ◽  
Two Stage ◽  
Pronounced Increase ◽  
One Stage ◽  
Assay Procedure ◽  
Bovine Plasma ◽  
The One ◽  
Autoprothrombin C

SummaryA two-stage assay procedure was developed for the determination of the autoprothrombin C titre which can be developed from prothrombin or autoprothrombin III containing solutions. The proenzyme is activated by Russell’s viper venom and the autoprothrombin C activity that appears is measured by its ability to shorten the partial thromboplastin time of bovine plasma.Using the assay, the autoprothrombin C titre was determined in the plasma of several species, as well as the percentage of it remaining in the serum from blood clotted in glass test tubes. Much autoprothrombin III remains in human serum. With sufficient thromboplastin it was completely utilized. Plasma from selected patients with coagulation disorders was assayed and only Stuart plasma was abnormal. In so-called factor VII, IX, and P.T.A. deficiency the autoprothrombin C titre and thrombin titre that could be developed was normal. In one case (prethrombin irregularity) practically no thrombin titre developed but the amount of autoprothrombin C which generated was in the normal range.Dogs were treated with Dicumarol and the autoprothrombin C titre that could be developed from their plasmas decreased until only traces could be detected. This coincided with a lowering of the thrombin titre that could be developed and a prolongation of the one-stage prothrombin time. While the Dicumarol was acting, the dogs were given an infusion of purified bovine prothrombin and the levels of autoprothrombin C, thrombin and one-stage prothrombin time were followed for several hours. The tests became normal immediately after the infusion and then went back to preinfusion levels over a period of 24 hrs.In other dogs the effect of Dicumarol was reversed by giving vitamin K1 intravenously. The effect of the vitamin was noticed as early as 20 min after administration.In response to vitamin K the most pronounced increase was with that portion of the prothrombin molecule which yields thrombin. The proportion of that protein with respect to the precursor of autoprothrombin C increased during the first hour and then started to go down and after 3 hrs was equal to the proportion normally found in plasma.

SIMPLIFIED DEXAMETHASONE SUPPRESSION TEST

1969 ◽  
Vol 61 (2) ◽  
pp. 219-231 ◽  
Author(s):  
V. H. Asfeldt
Keyword(s):  
Cushing’S Syndrome ◽  
Normal Subjects ◽  
Cushing's Syndrome ◽  
Dexamethasone Suppression Test ◽  
Clinical Value ◽  
Suppression Test ◽  
The One ◽  
Steroid Excretion ◽  
Dexamethasone Suppression

ABSTRACT This is an investigation of the practical clinical value of the one mg dexamethasone suppression test of Nugent et al. (1963). The results, evaluated from the decrease in fluorimetrically determined plasma corticosteroids in normal subjects, as well as in cases of exogenous obesity, hirsutism and in Cushing's syndrome, confirm the findings reported in previous studies. Plasma corticosteroid reduction after one mg of dexamethasone in cases of stable diabetes was not significantly different from that observed in control subjects, but in one third of the insulin-treated diabetics only a partial response was observed, indicating a slight hypercorticism in these patients. An insufficient decrease in plasma corticosteroids was observed in certain other conditions (anorexia nervosa, pituitary adenoma, patients receiving contraceptive or anticonvulsive treatment) with no hypercorticism. The physiological significance of these findings is discussed. It is concluded that the test, together with a determination of the basal urinary 17-ketogenic steroid excretion, is suitable as the first diagnostic test in patients in whom Cushing's syndrome is suspected. In cases of insufficient suppression of plasma corticosteroids, further studies, including the suppression test of Liddle (1960), must be carried out.

A Validated 2D-LC-UV Method for Simultaneous Determination of Imatinib and N-demethylimatinib in Plasma and Its Clinical Application for Therapeutic Drug Monitoring with GIST Patients

2020 ◽  
Vol 17 ◽  
Author(s):  
Houli Li ◽  
Di Zhang ◽  
Xiaoliang Cheng ◽  
Qiaowei Zheng ◽  
Kai Cheng ◽  
...  
Keyword(s):  
Therapeutic Drug Monitoring ◽  
One Dimension ◽  
Therapeutic Drug ◽  
Plasma Samples ◽  
Column Temperature ◽  
Injection Volume ◽  
Target Analytes ◽  
The One ◽  
Middle Column

Background: The trough concentration (Cmin) of Imatinib (IM) is closely related to the treatment outcomes and adverse reactions of patients with gastrointestinal stromal tumors (GIST). However, the drug plasma level has great interand intra-individual variability, and therapeutic drug monitoring (TDM) is highly recommended. Objective: To develop a novel, simple, and economical two-dimensional liquid chromatography method with ultraviolet detector (2D-LC-UV) for simultaneous determination of IM and its major active metabolite, N-demethyl imatinib (NDIM) in human plasma, and then apply the method for TDM of the drug. Method: Sample was processed by simple protein precipitation. Two target analytes were separated on the one-dimension column, captured on the middle column, and then transferred to the two-dimension column for further analysis. The detection was performed at 264 nm. The column temperature was maintained at 40˚C and the injection volume was 500 μL. Totally 32 plasma samples were obtained from patients with GIST who were receiving IM. Method: Sample was processed by simple protein precipitation. Two target analytes were separated on the one-dimension column, captured on the middle column, and then transferred to the two-dimension column for further analysis. The detection was performed at 264 nm. The column temperature was maintained at 40˚C and the injection volume was 500 μL. Totally 32 plasma samples were obtained from patients with GIST who were receiving IM. Conclusion: The novel 2D-LC-UV method is simple, stable, highly automated and independent of specialized technicians, which greatly increases the real-time capability of routine TDM for IM in hospital.

scholarly journals The Concept of Accuracy Analysis of the Vertical Displacements Gained from the Hydrostatic Levelling Systems’ Measurements

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4842
Author(s):  
Waldemar Kamiński
Keyword(s):  
Accuracy Assessment ◽  
Theoretical Models ◽  
Vertical Displacement ◽  
Serial Connection ◽  
Vertical Displacements ◽  
Comprehensive Determination ◽  
The One ◽  
The Individual ◽  
Reference Sensor

Nowadays, hydrostatic levelling is a widely used method for the vertical displacements’ determinations of objects such as bridges, viaducts, wharfs, tunnels, high buildings, historical buildings, special engineering objects (e.g., synchrotron), sports and entertainment halls. The measurements’ sensors implemented in the hydrostatic levelling systems (HLSs) consist of the reference sensor (RS) and sensors located on the controlled points (CPs). The reference sensor is the one that is placed at the point that (in theoretical assumptions) is not a subject to vertical displacements and the displacements of controlled points are determined according to its height. The hydrostatic levelling rule comes from the Bernoulli’s law. While using the Bernoulli’s principle in hydrostatic levelling, the following components have to be taken into account: atmospheric pressure, force of gravity, density of liquid used in sensors places at CPs. The parameters mentioned above are determined with some mean errors that influence on the accuracy assessment of vertical displacements. In the subject’s literature, there are some works describing the individual accuracy analyses of the components mentioned above. In this paper, the author proposes the concept of comprehensive determination of mean error of vertical displacement (of each CPs), calculated from the mean errors’ values of components dedicated for specific HLS. The formulas of covariances’ matrix were derived and they enable to make the accuracy assessment of the calculations’ results. The author also presented the subject of modelling of vertical displacements’ gained values. The dependences, enabling to conduct the statistic tests of received model’s parameters, were implemented. The conducted tests make it possible to verify the correctness of used theoretical models of the examined object treated as the rigid body. The practical analyses were conducted for two simulated variants of sensors’ connections in HLS. Variant no. I is the sensors’ serial connection. Variant no. II relies on the connection of each CPs with the reference sensor. The calculations’ results show that more detailed value estimations of the vertical displacements can be obtained using variant no. II.

Sign in / Sign up

Export Citation Format

Share Document