scholarly journals Experimental Investigation of Ternary Alloys for Fusion Breeding Blankets

2015 ◽  
Author(s):  
B. William Choi ◽  
Ing L. Chiu
2006 ◽  
Vol 508 ◽  
pp. 361-366 ◽  
Author(s):  
A. Addad ◽  
C. Bourgraff ◽  
H. Combeau ◽  
Gérard Lesoult

The aim of this study is to investigate the effect of the chemical composition, the nature of the primary solidification and peritectic reaction on microsegregation in cast steels. For this purpose, binary and ternary alloys in the Fe-Ni-C system have been selected. This study was carried out in parallel with a modelling work [1] in order to improve the prediction of macrosegregation of cast steels products.


Author(s):  
T. S. Kuan

Recent electron diffraction studies have found ordered phases in AlxGa1-xAs, GaAsxSb1-x, and InxGa1-xAs alloy systems, and these ordered phases are likely to be found in many other III-V ternary alloys as well. The presence of ordered phases in these alloys was detected in the diffraction patterns through the appearance of superstructure reflections between the Bragg peaks (Fig. 1). The ordered phase observed in the AlxGa1-xAs and InxGa1-xAs systems is of the CuAu-I type, whereas in GaAsxSb1-x this phase and a chalcopyrite type ordered phase can be present simultaneously. The degree of order in these alloys is strongly dependent on the growth conditions, and during the growth of these alloys, high surface mobility of the depositing species is essential for the onset of ordering. Thus, the growth on atomically flat (110) surfaces usually produces much stronger ordering than the growth on (100) surfaces. The degree of order is also affected by the presence of antiphase boundaries (APBs) in the ordered phase. As shown in Fig. 2(a), a perfectly ordered In0.5Ga0.5As structure grown along the <110> direction consists of alternating InAs and GaAs monolayers, but due to local growth fluctuations, two types of APBs can occur: one involves two consecutive InAs monolayers and the other involves two consecutive GaAs monolayers.


Author(s):  
S. Hagège ◽  
U. Dahmen ◽  
E. Johnson ◽  
A. Johansen ◽  
V.S. Tuboltsev

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.


Author(s):  
R. Haswell ◽  
U. Bangert ◽  
P. Charsley

A knowledge of the behaviour of dislocations in semiconducting materials is essential to the understanding of devices which use them . This work is concerned with dislocations in alloys related to the semiconductor GaAs . Previous work on GaAs has shown that microtwinning occurs on one of the <110> rosette arms after indentation in preference to the other . We have shown that the effect of replacing some of the Ga atoms by Al results in microtwinning in both of the rosette arms.In the work to be reported dislocations in specimens of different compositions of Gax Al(1-x) As and Gax In(1-x) As have been studied by using micro indentation on a (001) face at room temperature . A range of electron microscope techniques have been used to investigate the type of dislocations and stacking faults/microtwins in the rosette arms , which are parallel to the [110] and [10] , as a function of composition for both alloys . Under certain conditions microtwinning occurs in both directions . This will be discussed in terms of the dislocation mobility.


2014 ◽  
Author(s):  
Shane Close ◽  
Victoria Adkins ◽  
Kandice Perry ◽  
Katheryn Eckles ◽  
Jill Brown ◽  
...  

2004 ◽  
Author(s):  
Mustapha Mouloua ◽  
Janan Smither ◽  
Robert C. Kennedy ◽  
Robert S. Kenned ◽  
Dan Compton ◽  
...  

2013 ◽  
Author(s):  
Sarah Edwards ◽  
Lindsey Brinker ◽  
Kathryn A. Bradshaw ◽  
Jennifer A. Munch ◽  
Rachel E. Brenner

Sign in / Sign up

Export Citation Format

Share Document