scholarly journals Preliminary EDS Liquid Sample Adapter Design Assurance Testing.

2021 ◽  
Author(s):  
Robert Crocker ◽  
Thomas Raber
Keyword(s):  
Liquid Sample

SEM evaluation of the TEM cold-stage double-film specimen

1984 ◽  
Vol 42 ◽  
pp. 272-273
Author(s):  
Jayesh Bellare
Keyword(s):  
Spatial Distribution ◽  
Sample Preparation ◽  
Sample Thickness ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Liquid Sample ◽  
Thin Specimen ◽  
Sample Preparation Technique ◽  
Cold Stage ◽  
Film Specimen

Seeing is believing, but only after the sample preparation technique has received a systematic study and a full record is made of the treatment the sample gets.For microstructured liquids and suspensions, fast-freeze thermal fixation and cold-stage microscopy is perhaps the least artifact-laden technique. In the double-film specimen preparation technique, a layer of liquid sample is trapped between 100- and 400-mesh polymer (polyimide, PI) coated grids. Blotting against filter paper drains excess liquid and provides a thin specimen, which is fast-frozen by plunging into liquid nitrogen. This frozen sandwich (Fig. 1) is mounted in a cooling holder and viewed in TEM.Though extremely promising for visualization of liquid microstructures, this double-film technique suffers from a) ireproducibility and nonuniformity of sample thickness, b) low yield of imageable grid squares and c) nonuniform spatial distribution of particulates, which results in fewer being imaged.

Thermal bursting ionization for ambient mass spectrometry

RSC Advances ◽  
2016 ◽  
Vol 6 (3) ◽  
pp. 2496-2499 ◽  
Author(s):  
Jiying Pei ◽  
Kefu Yu ◽  
Yinghui Wang
Keyword(s):  
Mass Spectrometry ◽  
Ambient Ionization ◽  
Ambient Mass Spectrometry ◽  
Sample Analysis ◽  
Liquid Sample ◽  
Ionization Source ◽  
Complex Liquid

Ambient ionization source, thermal bursting ionization (TBI), was characterized for complex liquid sample analysis with mass spectrometry.

scholarly journals Biosensing Near the Exceptional Point Based on Resonant Optical Tunneling Effect

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 426
Author(s):  
Yang Liu ◽  
Pengyun Yan ◽  
Feng Liu ◽  
Aoqun Jian ◽  
Shengbo Sang
Keyword(s):  
Exceptional Point ◽  
Tunneling Effect ◽  
Coupled Mode Theory ◽  
Environment Protection ◽  
Label Free ◽  
Liquid Sample ◽  
Water Safety ◽  
Coupled Mode ◽  
Drinking Water Safety ◽  
Optical Tunneling

Inspired by exceptional point (EP) sensing in non-Hermitian systems, in this work, a label-free biosensor for detecting low-concentration analytes is proposed, via a special multilayer structure: a resonant optical tunneling resonator. Due to the square root topology near the exceptional point, a recognized target analyte perturbs the system deviated from the exceptional point, leading to resolvable modes splitting in the transmission spectrum. The performance of the designed sensor is analyzed by the coupled-mode theory and transfer matrix method, separately. Here, the simulation results demonstrate that the obtained sensitivity is 17,120 nm/imaginary part unit of refractive index (IP) and the theoretical detection limit is 4.2 × 10−8 IP (regarding carcinoembryonic antigen (CEA), the minimum detection value is 1.78 ng). Instead of the typical diffusion manner, the liquid sample is loaded by convection, which can considerably improve the efficiency of sample capture and shorten the response time of the sensor. The sketched sensor may find potential application in the fields of biomedical detection, environment protection, and drinking water safety.

scholarly journals Nanomechanical Molecular Mass Sensing Using Suspended Microchannel Resonators

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3337
Author(s):  
Alberto Martín-Pérez ◽  
Daniel Ramos ◽  
Javier Tamayo ◽  
Montserrat Calleja
Keyword(s):  
Molecular Mass ◽  
Mass Density ◽  
Applied Pressure ◽  
Atomic Mass ◽  
Liquid Sample ◽  
Mass Sensing ◽  
Average Molecular Mass ◽  
Fluid Properties ◽  
Molecular Masses ◽  
Microchannel Resonators

In this work we study the different phenomena taking place when a hydrostatic pressure is applied in the inner fluid of a suspended microchannel resonator. Additionally to pressure-induced stiffness terms, we have theoretically predicted and experimentally demonstrated that the pressure also induces mass effects which depend on both the applied pressure and the fluid properties. We have used these phenomena to characterize the frequency response of the device as a function of the fluid compressibility and molecular masses of different fluids ranging from liquids to gases. The proposed device in this work can measure the mass density of an unknown liquid sample with a resolution of 0.7 µg/mL and perform gas mixtures characterization by measuring its average molecular mass with a resolution of 0.01 atomic mass units.

Liquid Sample Concentrator

Science ◽  
1975 ◽  
Vol 189 (4208) ◽  
pp. 1110-1110
Keyword(s):  
Liquid Sample

Liquid sample plasma desorption mass spectrometry

1987 ◽  
Vol 77 (2-3) ◽  
pp. 173-186 ◽  
Author(s):  
M. Salehpour ◽  
P. Håkansson ◽  
B.U.R. Sundqvist ◽  
A.G. Craig
Keyword(s):  
Mass Spectrometry ◽  
Liquid Sample ◽  
Desorption Mass Spectrometry ◽  
Plasma Desorption Mass Spectrometry ◽  
Plasma Desorption

scholarly journals Capillary Pumping Independent of Liquid Sample Viscosity

Langmuir ◽  
2016 ◽  
Vol 32 (48) ◽  
pp. 12650-12655 ◽  
Author(s):  
Weijin Guo ◽  
Jonas Hansson ◽  
Wouter van der Wijngaart
Keyword(s):  
Liquid Sample

A method of long-time-irradiation of a voluminous liquid sample in a reactor neutron flux for activation analysis of water

1980 ◽  
Vol 177 (2-3) ◽  
pp. 557-561 ◽  
Author(s):  
J.I. Kim ◽  
H. Stärk ◽  
I. Fiedler
Keyword(s):  
Activation Analysis ◽  
Neutron Flux ◽  
Reactor Neutron ◽  
Liquid Sample ◽  
Long Time
Sign in / Sign up

Export Citation Format

Share Document