scholarly journals Random Small Sample Prediction Model on Displacement of Extensive Deep Soil Excavation

2015 ◽  
Vol 9 (1) ◽  
pp. 53-60
Author(s):  
Zhou Shengquan ◽  
Zhao Xiaolong ◽  
Yao Zhaoming
Keyword(s):  
Prediction Model ◽  
Kernel Function ◽  
Cross Validation ◽  
Small Sample ◽  
Support Vector ◽  
Cauchy Kernel ◽  
Deep Soil ◽  
Deep Foundation ◽  
Validation Method ◽  
The Cross

In order to forecast the displacement of deep foundation pit support, this document proposes a new method which combines the cross validation method and supports vector machine (SVM) based on random small samples.Because the random small monitoring data are difficult to fit and forecast, the cross validation method and different kernel function of support vector machine algorithm arerepeatedly used to establish and optimize the displacement prediction model of underground continuous wall, and then uses validation samples to test the accuracy of the models. The results show that this method can meet the requirements of precision relatively well, and Cauchy kernel function is better than the other. In the aspect of accuracy of model fitting and prediction, this method has great advantages, which can be applied to practical engineering.

scholarly journals Random Small Sample Prediction Model on Displacement of Extensive Deep Soil Excavation

2015 ◽  
Vol 9 (1) ◽  
pp. 107-114
Author(s):  
Zhou Shengquan ◽  
Zhao Xiaolong ◽  
Yao Zhaoming
Keyword(s):  
Prediction Model ◽  
Kernel Function ◽  
Cross Validation ◽  
Small Sample ◽  
Support Vector ◽  
Cauchy Kernel ◽  
Deep Soil ◽  
Deep Foundation ◽  
Validation Method ◽  
The Cross

In order to forecast the displacement of deep foundation pit support, this document proposes a new method which combines the cross validation method and supports vector machine (SVM) based on random small samples. Because the random small monitoring data are difficult to fit and forecast, the cross validation method and different kernel function of support vector machine algorithm arerepeatedly used to establish and optimize the displacement prediction model of underground continuous wall, and then uses validation samples to test the accuracy of the models. The results show that this method can meet the requirements of precision relatively well, and Cauchy kernel function is better than the other. In the aspect of accuracy of model fitting and prediction, this method has great advantages, which can be applied to practical engineering.

Identifying protein subcellular location with embedding features learned from networks

2020 ◽  
Vol 17 ◽  
Author(s):  
Hongwei Liu ◽  
Bin Hu ◽  
Lei Chen ◽  
Lin Lu
Keyword(s):  
Computational Methods ◽  
Protein Function ◽  
Cross Validation ◽  
Learning Algorithm ◽  
Subcellular Location ◽  
Support Vector ◽  
Network Embedding ◽  
Validation Method ◽  
Protein Subcellular Location ◽  
The Cross

Background: Identification of protein subcellular location is an important problem because the subcellular location is highly related to protein function. It is fundamental to determine the locations with biology experiments. However, these experiments are of high costs and time-consuming. The alternative way to address such problem is to design effective computational methods. Objective: To date, several computational methods have been proposed in this regard. However, these methods mainly adopted the features derived from proteins themselves. On the other hand, with the development of network technique, several embedding algorithms have been proposed, which can encode nodes in the network into feature vectors. Such algorithms connected the network and traditional classification algorithms. Thus, they provided a new way to construct models for the prediction of protein subcellular location. Method: In this study, we analyzed features produced by three network embedding algorithms (DeepWalk, Node2vec and Mashup) that were applied on one or multiple protein networks. Obtained features were learned by one machine learning algorithm (support vector machine or random forest) to construct the model. The cross-validation method was adopted to evaluate all constructed models. Results: After evaluating models with the cross-validation method, embedding features yielded by Mashup on multiple networks were quite informative for predicting protein subcellular location. The model based on these features were superior to some classic models. Conclusion: Embedding features yielded by a proper and powerful network embedding algorithm were effective for building the model for prediction of protein subcellular location, providing new pipelines to build more efficient models.

scholarly journals Pressure Prediction of Coal Slurry Transportation Pipeline Based on Particle Swarm Optimization Kernel Function Extreme Learning Machine

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Xue-cun Yang ◽  
Xiao-ru Yan ◽  
Chun-feng Song
Keyword(s):  
Support Vector Machine ◽  
Prediction Model ◽  
Extreme Learning Machine ◽  
Kernel Function ◽  
Particle Swarm ◽  
Support Vector ◽  
Particle Swarm Algorithm ◽  
Coal Slurry ◽  
Swarm Optimization ◽  
Learning Machine

For coal slurry pipeline blockage prediction problem, through the analysis of actual scene, it is determined that the pressure prediction from each measuring point is the premise of pipeline blockage prediction. Kernel function of support vector machine is introduced into extreme learning machine, the parameters are optimized by particle swarm algorithm, and blockage prediction method based on particle swarm optimization kernel function extreme learning machine (PSOKELM) is put forward. The actual test data from HuangLing coal gangue power plant are used for simulation experiments and compared with support vector machine prediction model optimized by particle swarm algorithm (PSOSVM) and kernel function extreme learning machine prediction model (KELM). The results prove that mean square error (MSE) for the prediction model based on PSOKELM is 0.0038 and the correlation coefficient is 0.9955, which is superior to prediction model based on PSOSVM in speed and accuracy and superior to KELM prediction model in accuracy.

Arch Dam Deformation Prediction Model Based on PSO-SVM

2013 ◽  
Vol 351-352 ◽  
pp. 1306-1311 ◽  
Author(s):  
Jing Yang Liu ◽  
He Zhi Liu
Keyword(s):  
Prediction Model ◽  
Large Scale ◽  
Small Sample ◽  
Arch Dam ◽  
Support Vector ◽  
Model Parameters ◽  
Deformation Prediction ◽  
Dam Foundation ◽  
Model Based ◽  
Dam Deformation

Arch dam has gradually evolved as one of dam type as main large-scale hydraulic project, dam deformation prediction is an important part of dam safety monitoring, and it is difficult to forecast because of the complicated nonlinear characteristics of the monitoring data. Support Vector Machine (SVM) could solve the small sample, nonlinear high dimension problem due to the excellent generalization ability, and hence it has been widely used in the forecast of arch dam deformation. However, the forecast results considerably depend on the choice of SVM model parameters. In this paper, Particle Swarm Optimization (PSO), which has the characteristic of fast global optimization, was applied to optimize the parameters in SVM, and then the dam deformation prediction model based on PSO-SVM could be established. The model is applied to a certain arch dam foundation prediction. The accuracy of this employed approach was examined by comparing it with multiple regression method. In a word, the experimental results indicate that the proposed method based on PSO-SVM can be used in arch dam deformation prediction.

Modeling and Simulation of the GA_LSSVM-Based Soft Measurement for Torque

2010 ◽  
Vol 44-47 ◽  
pp. 733-737
Author(s):  
Zhen Chen ◽  
An Yi Huang
Keyword(s):  
Support Vector Machine ◽  
Genetic Algorithms ◽  
Modeling And Simulation ◽  
Traditional Method ◽  
Measurement Accuracy ◽  
Cross Validation ◽  
Measurement Methods ◽  
Small Sample ◽  
Support Vector ◽  
Soft Measurement

Given the traditional method of direct measurement which is of high cost, difficult installation and poor reliability,this paper is presented a new model of the torque soft measure method based on least squares support vector machine using genetic algorithms optimization:genetic algorithms replaces the previous cross-validation method for model parameter’s optimization, in order to avoid the blindness of the parameter choices.Verified by simulation, the model can effectively address the deficiencies of traditional measurement methods and obtain better measurement accuracy and speed , possessing benefits of an outstanding ability for small sample study and being easy to compute.

Small Sample Competing Failure Model of Cylinder Liners in Diesel Engines

2013 ◽  
Vol 427-429 ◽  
pp. 124-128
Author(s):  
Qu Li Ma ◽  
Jian Jun Yang ◽  
Yi Liu
Keyword(s):  
Diesel Engine ◽  
Prediction Model ◽  
Cylinder Liner ◽  
Small Sample ◽  
Likelihood Method ◽  
Support Vector ◽  
Failure Model ◽  
Engine Cylinder ◽  
Quasi Maximum Likelihood ◽  
Engine Cylinder Liner

In order to deal with the small sample problem in practical reliability analysis of the diesel engine cylinder liner, the method and the steps of using support vector machine to build a regression prediction model to eventually develop the competing failure model of diesel engine cylinder liner are proposed. As proposed, more samples are generated by use of the regression prediction model and the quasi maximum likelihood method is used to separately estimate the occurring patterns of two failure models, including abrasion deterioration and pyrolysis. The scientificity and effectiveness of this method was demonstrated through calculation of examples and comparison of results.

scholarly journals Estimation of Heat-Attributable Mortality Using the Cross-Validated Best Temperature Metric in Switzerland and South Korea

2021 ◽  
Vol 18 (12) ◽  
pp. 6413
Author(s):  
Jae Young Lee ◽  
Martin Röösli ◽  
Martina S. Ragettli
Keyword(s):  
South Korea ◽  
Minimum Temperature ◽  
Cross Validation ◽  
Specific Model ◽  
Apparent Temperature ◽  
Maximum Temperature ◽  
Attributable Mortality ◽  
Validation Method ◽  
Attributable Fractions ◽  
The Cross

This study presents a novel method for estimating the heat-attributable fractions (HAF) based on the cross-validated best temperature metric. We analyzed the association of eight temperature metrics (mean, maximum, minimum temperature, maximum temperature during daytime, minimum temperature during nighttime, and mean, maximum, and minimum apparent temperature) with mortality and performed the cross-validation method to select the best model in selected cities of Switzerland and South Korea from May to September of 1995–2015. It was observed that HAF estimated using different metrics varied by 2.69–4.09% in eight cities of Switzerland and by 0.61–0.90% in six cities of South Korea. Based on the cross-validation method, mean temperature was estimated to be the best metric, and it revealed that the HAF of Switzerland and South Korea were 3.29% and 0.72%, respectively. Furthermore, estimates of HAF were improved by selecting the best city-specific model for each city, that is, 3.34% for Switzerland and 0.78% for South Korea. To the best of our knowledge, this study is the first to observe the uncertainty of HAF estimation originated from the selection of temperature metric and to present the HAF estimation based on the cross-validation method.

scholarly journals Hybrid Support Vector Regression Model and K-Fold Cross Validation for Water Quality Index Prediction in Langat River, Malaysia

2021 ◽  
Author(s):  
Naeimah Mamat ◽  
Firdaus Mohamad Hamzah ◽  
Othman Jaafar
Keyword(s):  
Water Quality ◽  
Prediction Model ◽  
Support Vector Regression ◽  
Water Quality Index ◽  
Quality Index ◽  
Cross Validation ◽  
Oxygen Demand ◽  
Support Vector ◽  
Langat River ◽  
Fold Cross Validation

AbstractWater quality analysis is an important step in water resources management and needs to be managed efficiently to control any pollution that may affect the ecosystem and to ensure the environmental standards are being met. The development of water quality prediction model is an important step towards better water quality management of rivers. The objective of this work is to utilize a hybrid of Support Vector Regression (SVR) modelling and K-fold cross-validation as a tool for WQI prediction. According to Department of Environment (DOE) Malaysia, a standard Water Quality Index (WQI) is a function of six water quality parameters, namely Ammoniacal Nitrogen (AN), Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Dissolved Oxygen (DO), pH, and Suspended Solids (SS). In this research, Support Vector Regression (SVR) model is combined with K-fold Cross Validation (CV) method to predict WQI in Langat River, Kajang. Two monitoring stations i.e., L15 and L04 have been monitored monthly for ten years as a case study. A series of results were produced to select the final model namely Kernel Function performance, Hyperparameter Kernel value, K-fold CV value and sets of prediction model value, considering all of them undergone training and testing phases. It is found that SVR model i.e., Nu-RBF combined with K-fold CV i.e., 5-fold has successfully predicted WQI with efficient cost and timely manner. As a conclusion, SVR model and K-fold CV method are very powerful tools in statistical analysis and can be used not limited in water quality application only but in any engineering application.

Sign in / Sign up

Export Citation Format

Share Document