Luliconazole-Loaded Thermosensitive Hydrogel as Aqueous based Nail Lacquer for the Treatment of Onychomycosis

2019 ◽  
Vol 9 (4) ◽  
pp. 321-329
Author(s):  
Rupinder K. Dhamoon ◽  
Ramesh K. Goyal ◽  
Harvinder Popli ◽  
Madhu Gupta
Keyword(s):  
Release Kinetics ◽  
Pluronic F127 ◽  
Current Therapy ◽  
Thermosensitive Hydrogel ◽  
Drying Time ◽  
Nail Diseases ◽  
Nail Lacquer ◽  
In Situ Gelling

Background: Onychomycosis is a nail fungal infection which accounts for 50% of the nail diseases and is characterized by disfigurement and discoloration of nails. The current therapy includes oral and topical formulations both of which come with their own drawbacks. This has left a room for developing patient- compliant novel strategies which can facilitate drug delivery deeper into the nails effectively. Objective: The main objective of the present work was to develop and evaluate in situ gelling thermosensitive hydrogel as an aqueous nail lacquer for the treatment of onychomycosis. The idea was to enhance permeation of Luliconazole into the nail while simultaneously solubilizing it in a hydrophilic formulation. Methods: The sample of Luliconazole was authenticated using modern analytical techniques. The hydrogel- nail lacquer was prepared using poloxamer Pluronic F127. The formulation was evaluated in terms of drying time, viscosity, non- volatile content, pH, transition temperature, etc. In vitro study was done to check the drug release while determining release kinetics. In vitro transungual permeation study was done to check drug permeation through porcine hoof membrane. Stability studies were conducted to ensure formulation stability. Results: The results confirmed a stable formulation with enhanced permeation through porcine hoof membrane. Conclusion: The results support the potential use of in situ gelling thermo-sensitive hydrogels as a novel transungual formulation in the treatment of onychomycosis with a slight improvement in water resistance.

scholarly journals Formulation and Evaluation of Floating Oral In Situ Gelling System of Amoxicillin

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Dasharath M. Patel ◽  
Divyesh K. Patel ◽  
Chhagan N. Patel
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
Lag Time ◽  
Solution Viscosity ◽  
High Dose ◽  
In Situ Gelling

Purpose. Effective Helicobacter pylori eradication requires delivery of the antibiotic locally in the stomach. High dose of amoxicillin (750 to 1000 mg) is difficult to incorporate in floating tablets but can easily be given in liquid dosage form. Keeping the above facts in mind, we made an attempt to develop a new floating in situ gelling system of amoxicillin with increased residence time using sodium alginate as gelling polymer to eradicate H. pylori. Methods. Floating in situ gelling formulations were prepared using sodium alginate, calcium chloride, sodium citrate, hydroxypropyl methyl cellulose K100, and sodium bicarbonate. The prepared formulations were evaluated for solution viscosity, floating lag time, total floating time, and in vitro drug release. The formulation was optimized using a 32 full factorial design. Dissolution data were fitted to various models to ascertain kinetic of drug release. Regression analysis and analysis of variance were performed for dependent variables. Results. All formulations (F1–F9) showed floating within 30 s and had total floating time of more than 24 h. All the formulations showed good pourability. It was observed that concentration of sodium alginate and HPMC K100 had significant influence on floating lag time, cumulative percentage drug release in 6 h and 10 h. The batch F8 was considered optimum since it showed more similarity in drug release () to the theoretical release profile. Conclusion. Floating in situ gelling system of amoxicillin can be formulated using sodium alginate as a gelling polymer to sustain the drug release for 10 to 12 h with zero-order release kinetics.

scholarly journals Polishing the Therapy of Onychomycosis Induced by Candida spp.: Amphotericin B–Loaded Nail Lacquer

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 784
Author(s):  
Aleph M. S. Souza ◽  
Renato C. A. Ribeiro ◽  
Gleyse K. L. O. Pinheiro ◽  
Francisco I. Pinheiro ◽  
Wógenes N. Oliveira ◽  
...  
Keyword(s):  
Amphotericin B ◽  
Ex Vivo ◽  
Drug Loading ◽  
Drug Bioavailability ◽  
Candida Spp ◽  
Drying Time ◽  
Analytical Method Validation ◽  
Nail Lacquer ◽  
In Vitro Adhesion

Onychomycosis induced by Candida spp. has several limitations regarding its treatment. Nail lacquers display the potential to overcome these drawbacks by providing therapeutic compliance and increasing local drug bioavailability. Thus, this work aimed to produce a nail lacquer loaded with Amphotericin B (AmB) and evaluate its performance. The AmB-loaded nail lacquer was produced and preliminarily characterized. An AmB quantification method was developed. Stability, drug release, permeability and anti-Candida activity assays were conducted. The analytical method validation met the acceptance criteria. The drug loading efficiency was 100% (0.02 mg/g of total product), whereas the AmB stability was limited to ≅ 7 days (≅ 90% remaining). The nail lacquer displayed a drying time of 187 s, non-volatile content of around 20%w/w, water-resistance of approximately 2%w/w of weight loss and satisfactory in vitro adhesion. Moreover, the in vitro antifungal activity against different Candida spp. strains was confirmed. The AmB release and the ex vivo permeability studies revealed that AmB leaves the lacquer and permeates the nail matrix in 47.76 ± 0.07% over 24 h. In conclusion, AmB-loaded nail lacquer shows itself as a promising extemporaneous dosage form with remarkable anti-Candida activity related to onychomycosis.

DESIGN, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE NASAL IN SITU GELLING FORMULATIONS OF VENLAFAXINE HYDROCHLORIDE FOR BRAIN TARGETTING

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 25-31
Author(s):  
M Priyanka ◽  
◽  
F. S. Dasankoppa ◽  
H. N Sholapur ◽  
NGN Swamy ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Linear Regression Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Drug Content ◽  
Venlafaxine Hydrochloride ◽  
In Situ Gelling

The poor bioavailability and the therapeutic effectiveness exhibited by the anti-depressant venlafaxine hydrochloride on oral administration is overcome by the use of ion-activated gel forming systems that are instilled as drops; these undergo gelation in the nasal cavity. The present study describes the design, characterization and evaluation of mucoadhesive nasal in situ gelling drug delivery of venlafaxine hydrochloride using different polymers like sodium alginate, HPMC and pectin in various concentrations. DSC studies revealed compatibility of the drug and excipients used. The in situ gels were characterized for physicochemical parameters, gelling ability, rheological studies, drug content, drug entrapment efficiency, in vitro mucoadhesive strength, water holding capacity, gel expansion coefficient and in vitro drug release studies. The amount of polymer blends was optimized using 23 full factorial design. The influence of experimental factors on percentage cumulative drug release at the end of 2 and 8 hours were investigated to get optimized formulation. The responses were analyzed using ANOVA and polynomial equation was generated for each response using multiple linear regression analysis. Optimized formulation, F9, containing 1.98% w/V sodium alginate, 0.64% w/V hydroxylpropyl methylcellulose, 0.99% w/V pectin showed percentage cumulative drug release of 19.33 and 80.44 at the end of 2 and 8 hours, respectively, which were close to the predicted values. The optimized formulation was subjected to stability study for three months at 300C /75% RH. The stability study revealed no significant change in pH, drug content and viscosity. Thus, venlafaxine hydrochloride nasal mucoadhesive in situ gel could be successfully formulated to improve bioavailability and to target the brain.

scholarly journals Formulation and characterization of a novel pH-triggered in-situ gelling ocular system containing Gatifloxacin

1970 ◽  
Vol 1 (3) ◽  
pp. 43-49 ◽  
Author(s):  
Jovita Kanoujia ◽  
Kanchan Sonker ◽  
Manisha Pandey ◽  
Koshy M Kymonil ◽  
Shubhini A Saraf
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Gelling Agent ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Carbopol 940 ◽  
In Situ Gelling ◽  
Gel Transition

The present research work deals with the formulation and evaluation of in-situ gelling system based on sol-to-gel transition for ophthalmic delivery of an antibacterial agent gatifloxacin, to overcome the problems of poor bioavailability and therapeutic response exhibited by conventional formulations based a sol-to-gel transition in the cul-de-sac upon instillation. Carbopol 940 was used as the gelling agent in combination with HPMC and HPMC K15M which acted as a viscosity enhancing agent. The prepared formulations were evaluated for pH, clarity, drug content, gelling capacity, bioadhesive strength and in-vitro drug release. In-vitro drug release data of optimized formulation (F12) was treated according to Zero, First, Korsmeyer Peppas and Higuchi kinetics to access the mechanism of drug release. The clarity, pH, viscosity and drug content of the developed formulations were found in range 6.0-6.8, 10-570cps, 82-98% respectively. The gel provided sustained drug release over an 8 hour period. The developed formulation can be used as an in-situ gelling vehicle to enhance ocular bioavailability and the reduction in the frequency of instillation thereby resulting in better patient compliance. Key Words: In-situ gelation; Gatifloxacin; Carbopol 940; HPMC K15M. DOI: http://dx.doi.org/10.3329/icpj.v1i3.9661 International Current Pharmaceutical Journal 2012, 1(3): 43-49

Injectable in situ gelling delivery system for the treatment of jawbone infections

2021 ◽  
Author(s):  
Shreshtha Dash ◽  
Somnath Singh ◽  
Alekha K Dash
Keyword(s):  
Lactic Acid ◽  
Sustained Release ◽  
Cell Viability ◽  
Yield Stress ◽  
Delivery System ◽  
Pluronic F127 ◽  
Sustained Delivery ◽  
In Situ Gelling ◽  
Sustained Rate

Aim: A polymeric in situ gelling delivery system for localized and sustained delivery to jawbone infections was developed. Materials & methods: In situ gelling delivery systems were prepared using either poly-dl-lactic acid or chitosan and Pluronic F127/Pluronic F68. Metronidazole nanoparticles were prepared using poly (dl-lactide-co-glycolide) or chitosan. Poly (dl-lactide-co-glycolide) was used for microparticles. Particles were characterized for size, charge and morphology. Results: Viscosity and yield stress of the gels were 0.4 Pa.s and 2 Pa, respectively, with 70% cell viability over 72 h. Around 90% of loaded metronidazole was released at a sustained rate over 1 week. Conclusion: Use of appropriate amount of nano/microparticles in the gel resulted in a sustained release over a period of 1 week – needed for jawbone infection.

FORMULATION DEVELOPMENT AND EVALUATION OF AN IN SITU OPHTHALMIC GELLING SYSTEM OF BRIMONIDINE TARTRATE AND TIMOLOL MALEATE FOR THE TREATMENT OF GLAUCOMA

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (02) ◽  
pp. 76-78
Author(s):  
A Shirodker ◽  
◽  
S. Bhangle ◽  
R. Gude
Keyword(s):  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Content Uniformity ◽  
Formulation Development ◽  
Timolol Maleate ◽  
Release Studies ◽  
Brimonidine Tartrate ◽  
In Situ Gelling

The present study involved formulation of an in situ gelling system of brimonidine tartrate and timolol maleate for the treatment of glaucoma. Carbopol® 980 NF, xanthum gum and hydroxypropyl methylcellulose K4 M were used as polymers. The prepared in situ gelling systems were evaluated for clarity, appearance, texture analysis, pH, viscosity, rheological properties, in vitro gelation, isotonicity, drug content uniformity, in vitro release studies, microbiological evaluation, ex vivo release studies and stability testing. The results of the attenuated total reflectance spectroscopy and differential scanning calorimetry studies confirmed that there is no incompatibility between the drugs and the excipients. The formulations exhibited pseudoplastic rheology and formulation 3 showed the highest release of both the drugs from the formulation. The stability studies showed that the formulation was stable over the given period of time. Thus, it is evident that the in situ gelling system is a promising drug delivery system for the treatment of glaucoma.

DEVELOPMENT AND INVESTIGATION OF TIMOLOL MALEATE AND TRAVOPROST COMBINATION NIOSOMAL IN SITU GELLING SYSTEM FOR THE TREATMENT OF GLAUCOMA

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (07) ◽  
pp. 33-35
Author(s):  
A Dubey ◽  
◽  
P Prabhu ◽  
N Nair ◽  
K Beladiya ◽  
...  
Keyword(s):  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Timolol Maleate ◽  
In Situ Gel ◽  
Vesicle Size ◽  
Gelling Time ◽  
In Situ Gelling ◽  
Vitro Release

The aim of the present investigation was to develop a combination of timolol maleate and travoprost niosomal in situ gelling system for the treatment of glaucoma. Niosomes were prepared by thin film hydration technique using rotary flash evaporator. A 32 factorial design was utilized to study the effect of the molar ratio of Span 60 (X1) and cholesterol (X2) on vesicle size, drug entrapment efficiency and in vitro release study. On the basis of vesicle size, maximum entrapment efficiency and in vitro release of drug, best formulations were selected for the preparation of niosomal in situ gel (Drop). On the basis of gelling time and viscosity, optimized ratio of the polymers was selected for the desired preparation. Selected niosomal batches were dispersed in carbopol 940 and HPMC K4M polymer solution (combination IF6) to form in situ gel niosomal formulations (Drop). The gelling time of the niosomal in situ gel (NIF1) was found to be the best (+++) and the viscosity was found to be 1190 cP. Zeta potential, average size analysis, polydispersibility index value was found to be -45.1 mV, 256.5 nm, 0.228 respectively. In vitro drug release was found to be within the range of 50.23 ± 0.54 to 60.23 ± 0.33% over the period of 6 h. IOP lowering activity of best formulation (NIF1) showed more significant and sustained effect than the marketed eye drops. Best formulation (NIF1) was found to be stable, sterile, non irritant and isotonic. Hence niosomal in situ gelling combination system may have the potential of bringing better application than the conventional ocular therapy with improved ocular bioavailability and increased patient compliance.

Evaluation of in situ gelling chitosan-PEG copolymer for use in the spinal cord

2018 ◽  
Vol 33 (3) ◽  
pp. 435-446 ◽  
Author(s):  
Ashley E Mohrman ◽  
Mahmoud Farrag ◽  
Rachel K Grimm ◽  
Nic D Leipzig
Keyword(s):  
Spinal Cord ◽  
Polyethylene Glycol ◽  
Spinal Cord Injuries ◽  
Similar Response ◽  
Cellular Delivery ◽  
Thiolated Chitosan ◽  
Cord Injury ◽  
In Situ Gelling

The goal of the present work was to characterize a hydrogel material for localized spinal cord delivery. To address spinal cord injuries, an injectable in situ gelling system was tested utilizing a simple, effective, and rapid cross-linking method via Michael addition. Thiolated chitosan material and maleimide-terminated polyethylene glycol material were mixed to form a hydrogel and evaluated in vitro and in vivo. Three distinct thiolated chitosan precursors were made by varying reaction conditions; a modification of chitosan with Traut’s reagent (2-iminothiolane) displayed the most attractive hydrogel properties once mixed with polyethylene glycol. The final hydrogel chosen for animal testing had a swelling ratio (Q) of 57.5 ± 3.4 and elastic modulus of 378 ± 72 Pa. After confirming low cellular toxicity in vitro, the hydrogel was injected into the spinal cord of rats for 1 and 2 weeks to assess host reaction. The rats displayed no overt functional deficits due to injection following initial surgical recovery and throughout the 2-week period after for both the saline-injected sham group and hydrogel-injected group. The saline and hydrogel-injected animals both showed a similar response from ED1+ microglia and GFAP overexpression. No significant differences were found between saline-injected and hydrogel-injected groups for any of the measures studied, but there was a trend toward decreased affected area size from 1 to 2 weeks in both groups. Access to the central nervous system is limited by the blood–brain barrier for noninvasive therapies; further development of the current system for localized drug or cellular delivery has the potential to shape treatments of spinal cord injury.

Sign in / Sign up

Export Citation Format

Share Document