scholarly journals Formulation and characterization of a novel pH-triggered in-situ gelling ocular system containing Gatifloxacin

1970 ◽  
Vol 1 (3) ◽  
pp. 43-49 ◽  
Author(s):  
Jovita Kanoujia ◽  
Kanchan Sonker ◽  
Manisha Pandey ◽  
Koshy M Kymonil ◽  
Shubhini A Saraf
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Gelling Agent ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Carbopol 940 ◽  
In Situ Gelling ◽  
Gel Transition

The present research work deals with the formulation and evaluation of in-situ gelling system based on sol-to-gel transition for ophthalmic delivery of an antibacterial agent gatifloxacin, to overcome the problems of poor bioavailability and therapeutic response exhibited by conventional formulations based a sol-to-gel transition in the cul-de-sac upon instillation. Carbopol 940 was used as the gelling agent in combination with HPMC and HPMC K15M which acted as a viscosity enhancing agent. The prepared formulations were evaluated for pH, clarity, drug content, gelling capacity, bioadhesive strength and in-vitro drug release. In-vitro drug release data of optimized formulation (F12) was treated according to Zero, First, Korsmeyer Peppas and Higuchi kinetics to access the mechanism of drug release. The clarity, pH, viscosity and drug content of the developed formulations were found in range 6.0-6.8, 10-570cps, 82-98% respectively. The gel provided sustained drug release over an 8 hour period. The developed formulation can be used as an in-situ gelling vehicle to enhance ocular bioavailability and the reduction in the frequency of instillation thereby resulting in better patient compliance. Key Words: In-situ gelation; Gatifloxacin; Carbopol 940; HPMC K15M. DOI: http://dx.doi.org/10.3329/icpj.v1i3.9661 International Current Pharmaceutical Journal 2012, 1(3): 43-49

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF DICLOFENAC SODIUM LOADED EUDRAGIT RS100 POLYMERIC MICROSPONGE INCORPORATED INTO IN SITU GEL FOR OPHTHALMIC DRUG DELIVERY SYSTEM

2021 ◽  
pp. 63-69
Author(s):  
RAJASHRI B. AMBIKAR ◽  
ASHOK V. BHOSALE
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Diclofenac Sodium ◽  
Entrapment Efficiency ◽  
Gelling Agent ◽  
In Vitro Drug Release ◽  
In Situ Gel ◽  
Drug Content

Objective: Purpose of the study to design and formulate Diclofenac sodium (DIC) microsponges. Methods: With varied polymer: drug ratio DIC loaded microsponges were prepared with Eudragit RS100 polymer by quasi solvent diffusion method. Microsponges evaluated for particle size, entrapment efficiency, drug content, in vitro drug release, Fourier Transform Infrared Spectroscopy (FTIR), Differential scanning calorimetry (DSC) and Scanning electron microscopy (SEM). DIC loaded microsponges incorporated into ocular in situ gel to attained controlled release by microsponge and improved residence time by gelling system. Ocular in situ gel evaluated for pH, drug content determination, gelling capacity, in vitro drug release and sterility study. Results: DSER4 microsponge formulation having polymer to drug ratio 1:7 showed satisfactory production yield (68.13%), entrapment efficiency (62.86%), drug content (80.73%), requisite particle size (less than 10 µm) (7.52 µm) and in vitro release 87.94% after 6 h. Selected DSER4 formulation was incorporate into in situ gel. Carbopol 940 forms stiff gel at higher pH so used as a gelling agent, whereas Hydroxypropyl Methylcellulose E4M was used as a viscosity-enhancing agent for the formulation of in situ gel in varied compositions. In situ gel formulation IG4 showed sustained release of 76.92% till the end of 8 h and satisfactory gelling capacity so IG4 further evaluated for sterility test. Rheological studies reveal the sol-gel transition of in situ gel occur at the physiological condition to form stiff gel. Conclusion: Prepared in situ gel formulations showed sustained drug release for a period of 8 h, which is satisfactory for management of ocular pain.

DESIGN, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE NASAL IN SITU GELLING FORMULATIONS OF VENLAFAXINE HYDROCHLORIDE FOR BRAIN TARGETTING

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 25-31
Author(s):  
M Priyanka ◽  
◽  
F. S. Dasankoppa ◽  
H. N Sholapur ◽  
NGN Swamy ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Linear Regression Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Drug Content ◽  
Venlafaxine Hydrochloride ◽  
In Situ Gelling

The poor bioavailability and the therapeutic effectiveness exhibited by the anti-depressant venlafaxine hydrochloride on oral administration is overcome by the use of ion-activated gel forming systems that are instilled as drops; these undergo gelation in the nasal cavity. The present study describes the design, characterization and evaluation of mucoadhesive nasal in situ gelling drug delivery of venlafaxine hydrochloride using different polymers like sodium alginate, HPMC and pectin in various concentrations. DSC studies revealed compatibility of the drug and excipients used. The in situ gels were characterized for physicochemical parameters, gelling ability, rheological studies, drug content, drug entrapment efficiency, in vitro mucoadhesive strength, water holding capacity, gel expansion coefficient and in vitro drug release studies. The amount of polymer blends was optimized using 23 full factorial design. The influence of experimental factors on percentage cumulative drug release at the end of 2 and 8 hours were investigated to get optimized formulation. The responses were analyzed using ANOVA and polynomial equation was generated for each response using multiple linear regression analysis. Optimized formulation, F9, containing 1.98% w/V sodium alginate, 0.64% w/V hydroxylpropyl methylcellulose, 0.99% w/V pectin showed percentage cumulative drug release of 19.33 and 80.44 at the end of 2 and 8 hours, respectively, which were close to the predicted values. The optimized formulation was subjected to stability study for three months at 300C /75% RH. The stability study revealed no significant change in pH, drug content and viscosity. Thus, venlafaxine hydrochloride nasal mucoadhesive in situ gel could be successfully formulated to improve bioavailability and to target the brain.

Fabrication and Characterization of Ocular Phase Transition Systems for Blepharitis: A Novel Approach

2020 ◽  
Vol 10 (1) ◽  
pp. 24-37
Author(s):  
Deepali Verma ◽  
Shreya Kaul ◽  
Neha Jain ◽  
Upendra Nagaich
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Eye Drops ◽  
Stability Studies ◽  
In Vitro Drug Release ◽  
In Situ Gel ◽  
Drug Content ◽  
Erythromycin Estolate

Introduction: In the present research, erythromycin estolate loaded in-situ gel was formulated and evaluated for blepharitis in order to improve its therapeutic efficacy, precorneal residence time of the system and to enhance the ocular bioavailability. Material and Methods: The developed formulation was characterized by several parameters viz. FTIR, clarity, pH, gelation temperature, rheological studies, drug content, in vitro drug release studies, transcorneal permeation studies, bioadhesion studies, isotonicity and stability studies. Results: The optimized formulation exhibited non-fickian release diffusion with a sustained release of drug 82.76 ± 0.94% up to 8h and drug content 93.64%. Isotonicity revealed that the formulation was isotonic in nature and there was no shrinkage and busting of cells. Bioadhesion study was performed to check the adherence of the prepared in situ gel to the corneal surface for 4h. Ex vivo transcorneal permeation was observed to be significantly higher when compared with market eye drops. Histopathological studies were conducted to confirm the presence of normal ocular surface tissues by maintaining their morphological structures without causing damage to the tissues. The formulation was nonirritant as confirmed by the HET-CAM test. Stability studies and accelerated stability studies were conducted for 13 weeks and 26 weeks respectively and formulations were analyzed for the visual appearance, pH, viscosity, gelling capacity, drug content and in vitro drug release and results showed no change in the formulations. Conclusion: The formulation was therapeutically efficacious, sterile, stable and provided controlled release over a period of time. The developed system could be a viable alternative to conventional eye drops for treatment of various ocular diseases.

In vitro and In vivo Characterization of Pectin Based In situ Gelling System of Famotidine

2013 ◽  
Vol 5 (4) ◽  
pp. 1885-1894
Author(s):  
Mohmadmoin K. Modasiya ◽  
A K Patel ◽  
V.M Patel ◽  
G.C Patel
Keyword(s):  
Drug Release ◽  
Calcium Chloride ◽  
Fickian Diffusion ◽  
Similarity Factor ◽  
Drug Content ◽  
Model Drug ◽  
In Situ Gelling

In this study famotidine was used as a model drug to formulate and evaluate pH-induced in situ gelling system for oral sustained release drug delivery in stomach which has shorter biological half-life. To study the effect of independent variables 32 full factorial design was employed, concentration of pectin as pH dependant polymer and concentration of calcium chloride on dependent variables like viscosity, drug content, 50% and 80% drug release and similarity factor. It was found that both the concentration of pectin and concentration of calcium chloride had significant effect on viscosity, drug content, 50% and 80% drug release and similarity factor of the system. In vitro drug release study showed that drug released from the in situ gel followed non-Fickian diffusion. Mathematical modeling was employed for quantitative evaluation of the effect of formulation variables. Rat pylorus legation model was used for in vivo study of the selected formulation. Results shows gel formation in gastric juice and reduction in ulcer index. There were few or no major changes in the formulation during three months stability testing. The in situ gelling systems are useful for delivery of famotidine.

scholarly journals DEVELOPMENT AND PHYSICAL CHARACTERIZATION OF A PERIODONTAL BIOADHESIVE GEL OF GATIFLOXACIN

2017 ◽  
Vol 9 (3) ◽  
pp. 31
Author(s):  
Hanan Jalal Kassab ◽  
Lena Murad Thomas ◽  
Saba Abdulhadi Jabir
Keyword(s):  
Drug Release ◽  
Ph Value ◽  
Hydrophilic Polymers ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Carbopol 940 ◽  
Evaluation Parameters

Objective: The aim of this study was to develop a bioadhesive gel of gatifloxacin for the treatment of periodontal diseases.Methods: Periodontal gels of gatifloxacin were prepared using different hydrophilic polymers such as carbopol 940 (CP 940), carboxymethyl cellulose (CMC) and hydroxypropylmethyl cellulose (HPMC) in varied concentrations, either alone or as a combination. The prepared gels were evaluated for their physical appearance, pH, drug content, viscosity, bioadhesiveness and in vitro drug release profile. The influence of the type and the concentration of polymer on the drug release as well as on viscosity and mucoadhesiveness of prepared gels were investigated.Results: The prepared gels showed acceptable physical properties concerning color, homogeneity, consistency, spreadability, and pH value. Using different polymer types at different concentrations, as well as different polymer combinations, play a significant role in the variation of overall characteristics of formulations. Increasing the concentration of polymer increased the viscosity as well as mucoadhesion, and reduced drug release rate. Formulation F 11 (1 % CP 940 and 5 % CMC) was selected as the formula of choice based on the data of various evaluation parameters such as pH, drug content, viscosity, spreadability and bioadhesion as well as its ability to show a prolonged drug release pattern.Conclusion: The obtained results show that a bioadhesive periodontal gel of gatifloxacin can be prepared using hydrophilic polymers, and by using a combination of polymers the viscosity, mucoadhesiveness, spreadability and release behavior can be optimized.

scholarly journals FORMULATION AND EVALUATION OF NOVEL IN SITU GEL OF LAFUTIDINE FOR GASTRO RETENTIVE DRUG DELIVERY

2018 ◽  
Vol 11 (8) ◽  
pp. 88
Author(s):  
Sindhoor S M ◽  
Sneh Priya ◽  
Amala Maxwell
Keyword(s):  
Drug Release ◽  
Imaging Study ◽  
Lag Time ◽  
In Vivo Studies ◽  
In Vitro Drug Release ◽  
In Situ Gel ◽  
Drug Content

Objective: The aim of the present study was to formulate and evaluate the novel in situ gel of lafutidine for gastroretentive drug deliveryMethods: A gastroretentive in situ gel of lafutidine was formulated by pH-triggered ionic gelation method using different concentrations of gelling polymer such as sodium alginate, gellan gum, and xanthum gum. Prepared formulations were evaluated for viscosity, density, buoyancy lag time and buoyancy duration, and drug content. In vitro drug release studies of all formulations were also performed. In vivo fluorescence imaging study was conducted for optimized formulation and compared with control.Results: The concentration of gelling agents and release retardant polymers significantly affected viscosity, floating behavior, and in vitro drug release of the formulations. The pH and drug content were found in the range of 6.72–7.20 and 88.74–95.33%, respectively. Floating lag time was <2 min; duration of floating was more than 12 h. Minimum and maximum in vitro drug release were found to be for formulation F9 (51.74%) and F1 (82.76%), respectively, at the end of 12 h. The drug was released from the all the formulations in a sustained manner. In vivo studies confirmed the gastroretention of the formulation in mice stomach for 8 h. Stability studies indicated that the there was no significant change in the visual appearance, floating behavior, and drug content.Conclusion: The gastroretentive in situ gel system, prolonged the gastric residence time, thereby targeting site-specific drug release in the upper gastrointestinal tract.

scholarly journals FORMULATION AND EVALUATION OF FAMOTIDINE FAST DISSOLVING TABLETS USING SYNTHETIC SUPERDISINTEGRANTS

2019 ◽  
pp. 17-25
Author(s):  
SARIPILLI RAJESWARI ◽  
M. YERNI KUMARI
Keyword(s):  
Drug Release ◽  
Microcrystalline Cellulose ◽  
Research Work ◽  
Content Uniformity ◽  
Short Term ◽  
In Vitro Drug Release ◽  
Term Stability ◽  
Drug Content ◽  
Release Studies

Objective: The main aim of the present research work was to formulate fast dissolving tablets of famotidine by direct compression method and to evaluate the effect of synthetic super disintegrating agent on drug release pattern. Methods: The fast dissolving tablets were prepared by using crospovidone, croscarmellose sodium, sodium starch glycolate as superdisintegrants (2, 4 and 6 %w/w), mannitol 20 % and microcrystalline cellulose (44, 46 and 48 % w/w) as a directly compressible vehicle. All the prepared tablets were evaluated for hardness, friability, drug content uniformity, weight variation, disintegrating time, wetting time and in vitro drug release studies. Results: All the prepared fast dissolving tablets formulations were within the Pharmacopoeial standards limits. Based on in vitro drug release studies (>90 % within 30 min), the optimised formulations were optimised tested for the short term stability (at 40 ˚C/75% RH for 3 mo) and drug excipient interaction (fourier transform infrared spectroscopy). Conclusion: Hence, formulation prepared with 6 % w/w of crosspovidine and 44 % w/w of microcrystalline cellulose as emerged as the overall best formulation (>90 % within 30 min) compared to marketed product (>70 % within 30 min). Short-term stability studies on the formulations indicated that there are no significant changes in drug content and in vitro drug release (p<0.05).

scholarly journals Evaluation of in situ gel forming system loaded with etoricoxib and herbal adjuvant nanoparticles against human colon cancer cell lines (HT-29)

2020 ◽  
Vol 9 (1) ◽  
pp. 789-795
Keyword(s):  
Drug Release ◽  
Human Colon ◽  
Human Colon Cancer ◽  
In Vitro Drug Release ◽  
In Situ Gel ◽  
Drug Content ◽  
Tamarind Seed ◽  
Ht 29

The aim of the research work was to fabricate the nanosuspension of etoricoxib with polyherbal components (extract of ginger root and basil leaf) to enhance the solubility of API; furthermorein situ gel forming system for stomach specific drug delivery was prepared utilizing formulated nanosuspension as base. The objective of the present research is to enhance the solubility of poorly aqueous soluble drug by fabricating nanoparticles and improve their residence time within stomach by formulating in situ gel forming system. Tamarind seed polysaccharide as polymer, etoricoxib as drug, ethanolic extract of ginger (GE) and basil (BE), was used for preparation of nanoparticles.Solvent antisolvent precipitation method was used to prepare nanoparticles. The fabricated nanoparticles were evaluated for various parameters such as physical appearance, Scanning electron microscope, drug content, in-vitro drug release. For preparation of in-situ gel containing nanoparticles, tamarind seed polysaccharides, calcium carbonate and sodium alginate were used. The prepared formulations were evaluated for different characterization parameters such as,- pH, viscosity, floating behaviour, drug content, in-vitro drug release and in-vitro cytotoxic study. The in-situ gel containing nanoparticles were successfully prepared and evaluated. Firstly, the nanoparticles were evaluated for physical appearance, Scanning electron microscope, drug content, in-vitro drug release and found that the formulations were clear as well as homogenous, size of nanoparticles was evaluated in the range of 498nm to 587nm, the drug content of etoricoxib was found in the range of 71.38±0.01 (F5) to 79.45±0.01 (F6), the drug content of GE was found in the range of 69.25±0.05 (F4) to 74.25±0.02 (F1) and the drug content of BE was 69.48±0.09 (F1) to 75.59±0.08 (F6). The drug release was taken up to 12 h and found to be 99%. In-situ gel containing nanoparticles were also evaluated for different parameters such as pH, viscosity, floating behaviour, drug content, and in-vitro drug release. The pH of the prepared formulation was found to be in the range of 7.1±0.04 to 7.5±0.02. The viscosity of the prepared formulation was found in the range of 11.25±0.023 to 12.78 ±0.025. The lag time was found in the range of 11 to 20 sec and floating time was upto 24 h. The drug release was taken up to 8 h and found to be 99±0.2%. It can be concluded that etoricoxib with phytoconstituents (GE and BE) improved its potential to control the growth of human colon cancer cell line (HT-29) in in-vitro conditions. It was concluded from the findings that the in-situ gel containing nanoparticles of etoricoxib from solvent antisolvent method was successfully prepared and found that it has improved the solubility of the poorly soluble drug etoricoxib and dissolution rates.

scholarly journals FORMULATION OPTIMIZATION AND EVALUATION OF FLURBIPROFEN EMULGEL

2020 ◽  
pp. 49-54
Author(s):  
DIKSHA S. CHODANKAR ◽  
SACHI S. KUDCHADKAR ◽  
RAJASHREE S. GUDE ◽  
PRERANA D. NAVTI ◽  
SANAM M. SAWANT
Keyword(s):  
Side Effects ◽  
Drug Release ◽  
Stability Study ◽  
Water Soluble ◽  
Gelling Agent ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Dermal Delivery

Objective: The objective of the present study was to formulate flurbiprofen (FLB) emulgel, evaluation of the formulations and the selection of an optimized formulation through in vitro drug release and drug content studies. Flurbiprofen is a non-steroidal anti-inflammatory drug (NSAID) requiring frequent administration and its chronic intake can lead to systemic side effects like gastric irritation and GI bleeding. The development of a dermal drug delivery system can overcome these side effects. Methods: The emulgel formulations were produced using different combinations of oil and emulsifying agents. Carbopol 940 was used as a gelling agent. The prepared emulgels were evaluated for general appearance, pH, spreadability, extrudability, drug content, in vitro drug release, average globule size and viscosity. Results: Optimized formulation F7 showed a better in vitro drug release compared to the marketed gel preparation. The stability study for the optimized formulation was carried out at 25 °C/60 % RH for 3 mo and the emulgel was found to be stable concerning the physical appearance, pH and drug content. Conclusion: The study revolved around the formulation of emulgel containing Flurbiprofen for dermal delivery of the drug. Emulgel was formulated with the purpose to enhance the permeation of poorly water-soluble drug FLB. The study concluded that the optimized emulgel containing FLB exhibited better in vitro drug release profile compared to the marketed formulation.

scholarly journals FORMULATION AND EVALUATION OF FLOATING IN SITU GEL OF CIPROFLOXACIN

2019 ◽  
Vol 11 (1) ◽  
pp. 198
Author(s):  
Shailaja Pashikanti ◽  
Jyothsna B.
Keyword(s):  
Calcium Carbonate ◽  
Drug Release ◽  
Sodium Alginate ◽  
Gelling Agent ◽  
In Vitro Drug Release ◽  
In Situ Gel ◽  
Degradable Polymer ◽  
Gel Formulations

Objective: The objective of the study was to develop floating in situ gel formulations of Ciprofloxacin that has a narrow absorption window and mainly absorbed in the proximal areas of GIT. These formulations increases the targeted action on bacteria for a longer time that can be used in the treatment of Helicobacter pylori (H. pylori) infections and urinary tract infections.Methods: In situ gel formulations were prepared by varying concentrations of sodium alginate as in situ gel forming bio-degradable polymer and calcium carbonate as a cross-linking agent. The formulations were evaluated for Physical appearance, pH, in vitro drug release, viscosity, in vitro floating behaviour, in vitro gelling capacity and drug content. FTIR was conducted for Ciprofloxacin, excipients used and optimized formulation.Results: All the formulations showed an optimum viscosity that will allow ease of administration and swallowing. Floating lag time of all formulations was between 32-70 seconds and floated for>12 h. The in vitro gelling capacity increased with increasing the polymer and gelling agent concentrations. Increase in polymer concentration decreased the rate and extent of the drug release. Among all the formulations, F4 containing 4% w/v of sodium alginate and 4% w/v of calcium carbonate showed sustained in vitro drug release (95.6%) over an extended period of 12 h. FTIR studies revealed no interaction between drug and excipients used. Drug release from the formulations followed First order kinetics with Fickian diffusion.Conclusion: Ciprofloxacin was successfully formulated as a pH-triggered floating in situ gelling system using sodium alginate.

Sign in / Sign up

Export Citation Format

Share Document