Plant Oil-Based Nanoemulsions: Preparation and Efficacy for Hair Treatment

2020 ◽  
Vol 04 ◽  
Author(s):  
Lívia Gonçalves Ferreira Rodrigues ◽  
Juliana Falcão Alves de Carvalho ◽  
Cristal dos Santos Cerqueira Pinto ◽  
Elisabete Pereira Santos ◽  
Claudia Regina Elias Mansur
Keyword(s):  
Human Hair ◽  
Mechanical Tests ◽  
Plant Oils ◽  
Plant Oil ◽  
Oil In Water ◽  
Hair Samples ◽  
Poly Ethylene Oxide ◽  
Treatment Objective ◽  
Poly Ethylene ◽  
Average Size

Background:: The use of polymers in hair care products is widespread, and silicones in particular are extensively used in cosmetic formulations. In addition, plant oils can also be used for hair treatment. Objective: In the present work, oil-in-water (O/W) nanoemulsions were prepared to repair chemical damage to human hair samples, to investigate the combined use of a silicone polyether copolymer (surfactant) that has a branch composed of poly(ethylene oxide) in its chains, and two types of plant oils: coconut and ojon oil. Materials and Methods:: Surfactant-oil-water formulations were obtained by ultrasonic processing. The nanoemulsions were then applied to human hair strands previously damaged with sodium hydroxide, to compare the treated strands with untreated ones. The efficacy of the formulations was investigated by scanning electron microscopy, thermogravimetric analysis and mechanical tests. Results and Discussion:: Stables nanoemulsions were obtained with average size of the dispersed droplets up to 400 nm. The micrographs suggest that the action mechanism of the nanoemulsions depends not only on the type of plant oil used and size of the droplets dispersed in the system, but also on the type of hair that receives the treatment. The thermal analysis showed that the use of nanoemulsion changed the temperature of keratin interconversion to higher values, which can make hair fibers more resistant to heat. Hair resistance was improved when comparing virgin samples to the damaged ones. Conclusion:: The nanoemulsions were efficient in the treatment of the hair samples, which showed a significant improvement of their mechanical properties.

The Fabrication of Poly(Σ-caprolactone)–Poly(ethylene oxide) Sandwich Type Nanofibers Containing Sericin-Capped Silver Nanoparticles as an Antibacterial Wound Dressing

2021 ◽  
Vol 21 (5) ◽  
pp. 3041-3049
Author(s):  
Murat İnal ◽  
Zehra Gün Gök ◽  
Name Perktaş ◽  
Gozde Elif Kartal ◽  
Naciye Banu Verim ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Antibacterial Activity ◽  
Ethylene Oxide ◽  
Wound Dressing ◽  
Gram Positive ◽  
Gram Negative ◽  
Layer Material ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Average Size

In this study, antibacterial, synthetic poly(Σ-caprolactone)–poly(ethylene oxide) (PCL–PEO) multilayer nanofibers were produced by an electrospinning method. The material was synthesized in 3 layers. The upper–lower protective layers were produced by PCL nanofibers and the intermediate layer was produced from PEO nanofiber containing sericin-capped silver nanoparticles (S-AgNPs). The electrospinning conditions in which nano-sized, smooth, bead-free fibers were obtained was determined to be an applied voltage of 20 kV, a flow rate of 8 μL/min and a distance between the collector and the needle tip of 22 cm for the PCL layer (dissolved at a 12% g/mL concentration in a chloroform:methanol (3:2) solvent mixture) layer. For the S-AgNPs doped PEO layer (dissolved at a 3.5% g/mL concentration in water), the corresponding conditions were determined to be 20 kV, 15 μL/min and 20 cm. To characterize the three-layer material that consisted of PCL and S-AgNPs doped PEO layers, FTIR and SEM analyses were performed, and the water retention capacity, in situ degradability and antibacterial activity of the material was investigated. According to SEM analysis, the fibers obtained were found to be nano-sized, smooth and bead-free and the average size of the nanofibers forming the PCL layer was 687 nm while the average size of the fibers forming the PEO layer was 98 nm. Antibacterial activity tests were performed using gram-positive (Staphylococcus aureus ATCC 6538) and gram-negative (Escherichia coli ATCC 25922) bacteria and the resulting biomaterial was found to have antimicrobial effect on both gram-negative and gram-positive bacteria. It was determined that the 3-layer material obtained in this study can be used as a wound dressing.

scholarly journals Extensional Viscosity and Stability of Oil-in-water Emulsions with Addition Poly(ethylene oxide)

2012 ◽  
Vol 42 ◽  
pp. 733-741 ◽  
Author(s):  
S.Różańska ◽  
L. Broniarz-Press ◽  
J. Różański ◽  
P. Mitkowski ◽  
M. Ochowiak ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Extensional Viscosity ◽  
Oil In Water ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene

The Structure of Radiation Cross-Linked Poly (ethylene oxide) Gels

1971 ◽  
Vol 29 ◽  
pp. 76-77
Author(s):  
C. E. Cluthe ◽  
G. G. Cocks
Keyword(s):  
Molecular Weight ◽  
Ethylene Oxide ◽  
Parallel Plate ◽  
Average Molecular Weight ◽  
Radical Reaction ◽  
Free Radical Reaction ◽  
Nitrogen Gas ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Initial Viscosity

Aqueous solutions of a 1 weight-per cent poly (ethylene oxide) (PEO) were degassed under vacuum, transferred to a parallel plate viscometer under a nitrogen gas blanket, and exposed to Co60 gamma radiation. The Co60 source was rated at 4000 curies, and the dose ratewas 3.8x105 rads/hr. The poly (ethylene oxide) employed in the irradiations had an initial viscosity average molecular weight of 2.1 x 106.The solutions were gelled by a free radical reaction with dosages ranging from 5x104 rads to 4.8x106 rads.

Human-hair analysis

1992 ◽  
Vol 50 (1) ◽  
pp. 886-887
Author(s):  
Brenda E. Lambert ◽  
Ernest C. Hammond
Keyword(s):  
Human Hair ◽  
Hair Analysis ◽  
Hair Shaft ◽  
White Female ◽  
Chemical Processing ◽  
X Ray ◽  
Hair Samples ◽  
Wave Technique ◽  
Permanent Wave ◽  
Scanning Electron

The purpose of this study was to examine the external structure of four human hair shaft samples with the scanning Electron Microscope (SEM) and to obtain information regarding the chemical composition of hair by using the attached x ray microanalysis unit.The hair samples were obtained from two female subjects. Sample A was taken from a black female and had not undergone any type of chemical processing. Sample B, C, D were taken from a white female, and were natural, processed, and unpigmented, i.e. “gray”, respectively. Sample C had been bleached, tinted, and chemically altered using a permanent wave technique.

On the Properties of an Ion Conductive System Incorporated in Hybrid Films

2000 ◽  
Vol 628 ◽  
Author(s):  
G. González ◽  
P. J. Retuert ◽  
S. Fuentes
Keyword(s):  
Electrochemical Impedance ◽  
Ternary Phase Diagram ◽  
Lithium Perchlorate ◽  
Molar Ratio ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
Poly Ethylene Oxide ◽  
Ion Conducting ◽  
Poly Ethylene ◽  
High Degree

ABSTRACTBlending the biopolymer chitosan (CHI) with poly (aminopropilsiloxane) oligomers (pAPS), and poly (ethylene oxide) (PEO) in the presence of lithium perchlorate lead to ion conducting products whose conductivity depends on the composition of the mixture. A ternary phase diagram for mixtures containing 0.2 M LiClO4 shows a zone in which the physical properties of the products - transparent, flexible, mechanically robust films - indicate a high degree of molecular compatibilization of the components. Comparison of these films with binary CHI-pAPS nanocomposites as well as the microscopic aspect, thermal behavior, and X-ray diffraction pattern of the product with the composition PEO/CHI/pAPS/LiClO4 1:0.5:0.6:0.2 molar ratio indicates that these films may be described as a layered nanocomposite. In this composite, lithium species coordinated by PEO and pAPS should be inserted into chitosan layers. Electrochemical impedance spectroscopy measurements indicate the films are pure ionic conductors with a maximal bulk conductivity of 1.7*10-5 Scm-1 at 40 °C and a sample-electrode interface capacitance of about 1.2*10-9 F.

Effect of High Salt Concentration on Ion Clustering and Transport in Polymer Solid Electrolytes: a Molecular Dynamics Study of PEO-LiTFSI

2018 ◽  
Author(s):  
Nicola Molinari ◽  
Jonathan P. Mailoa ◽  
Boris Kozinsky
Keyword(s):  
Polymer Electrolyte ◽  
Salt Concentration ◽  
Rational Design ◽  
Material System ◽  
Ion Dynamics ◽  
High Concentration ◽  
Anion Clusters ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene

<div> <div> <div> <p>The model and analysis methods developed in this work are generally applicable to any polymer electrolyte/cation-anion combination, but we focus on the currently most prominent polymer electrolyte material system: poly(ethylene) oxide/Li- bis(trifluoromethane) sulfonamide (PEO + LiTFSI). The obtained results are surprising and challenge the conventional understanding of ionic transport in polymer electrolytes: the investigation of a technologically relevant salt concentration range (1 - 4 M) revealed the central role of the anion in coordinating and hindering Li ion movement. Our results provide insights into correlated ion dynamics, at the same time enabling rational design of better PEO-based electrolytes. In particular, we report the following novel observations. 1. Strong binding of the Li cation with the polymer competes with significant correlation of the cation with the salt anion. 2. The appearance of cation-anion clusters, especially at high concentration. 3. The asymmetry in the composition (and therefore charge) of such clusters; specifically, we find the tendency for clusters to have a higher number of anions than cations.</p> </div> </div> </div>

Effect of High Salt Concentration on Ion Clustering and Transport in Polymer Solid Electrolytes: a Molecular Dynamics Study of PEO-LiTFSI

2018 ◽  
Author(s):  
Nicola Molinari ◽  
Jonathan P. Mailoa ◽  
Boris Kozinsky
Keyword(s):  
Polymer Electrolyte ◽  
Salt Concentration ◽  
Rational Design ◽  
Material System ◽  
Ion Dynamics ◽  
High Concentration ◽  
Anion Clusters ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene

<div> <div> <div> <p>The model and analysis methods developed in this work are generally applicable to any polymer electrolyte/cation-anion combination, but we focus on the currently most prominent polymer electrolyte material system: poly(ethylene) oxide/Li- bis(trifluoromethane) sulfonamide (PEO + LiTFSI). The obtained results are surprising and challenge the conventional understanding of ionic transport in polymer electrolytes: the investigation of a technologically relevant salt concentration range (1 - 4 M) revealed the central role of the anion in coordinating and hindering Li ion movement. Our results provide insights into correlated ion dynamics, at the same time enabling rational design of better PEO-based electrolytes. In particular, we report the following novel observations. 1. Strong binding of the Li cation with the polymer competes with significant correlation of the cation with the salt anion. 2. The appearance of cation-anion clusters, especially at high concentration. 3. The asymmetry in the composition (and therefore charge) of such clusters; specifically, we find the tendency for clusters to have a higher number of anions than cations.</p> </div> </div> </div>

Sign in / Sign up

Export Citation Format

Share Document