A STUDY ON RELATIONSHIP BETWEEN ACCUMULATED RAINFALL AND FLOOD PEAK DISCHARGE USING LARGE ENSEMBLE EXPERIMENT DATA

2019 ◽  
Vol 75 (2) ◽  
pp. I_1075-I_1080
Author(s):  
Yuya KAGEYAMA ◽  
Masafumi YAMADA ◽  
Satoshi WATANABE ◽  
Koji IKEUCHI
Keyword(s):  
Peak Discharge ◽  
Experiment Data ◽  
Large Ensemble ◽  
Flood Peak ◽  
Accumulated Rainfall

scholarly journals Unmanned Aerial Systems-Aided Post-Flood Peak Discharge Estimation in Ephemeral Streams

2020 ◽  
Vol 12 (24) ◽  
pp. 4183
Author(s):  
Emmanouil Andreadakis ◽  
Michalis Diakakis ◽  
Emmanuel Vassilakis ◽  
Georgios Deligiannakis ◽  
Antonis Antoniadis ◽  
...  
Keyword(s):  
Flash Flood ◽  
Traditional Approach ◽  
Peak Discharge ◽  
Unmanned Aerial Systems ◽  
Monitoring Networks ◽  
Response Dynamics ◽  
Hydrologic Modelling ◽  
Flood Peak ◽  
Field Evidence ◽  
Aerial Systems

The spatial and temporal scale of flash flood occurrence provides limited opportunities for observations and measurements using conventional monitoring networks, turning the focus to event-based, post-disaster studies. Post-flood surveys exploit field evidence to make indirect discharge estimations, aiming to improve our understanding of hydrological response dynamics under extreme meteorological forcing. However, discharge estimations are associated with demanding fieldwork aiming to record in small timeframes delicate data and data prone-to-be-lost and achieve the desired accuracy in measurements to minimize various uncertainties of the process. In this work, we explore the potential of unmanned aerial systems (UAS) technology, in combination with the Structure for Motion (SfM) and optical granulometry techniques in peak discharge estimations. We compare the results of the UAS-aided discharge estimations to estimates derived from differential Global Navigation Satellite System (d-GNSS) surveys and hydrologic modelling. The application in the catchment of the Soures torrent in Greece, after a catastrophic flood, shows that the UAS-aided method determined peak discharge with accuracy, providing very similar values compared to the ones estimated by the established traditional approach. The technique proved to be particularly effective, providing flexibility in terms of resources and timing, although there are certain limitations to its applicability, related mostly to the optical granulometry as well as the condition of the channel. The application highlighted important advantages and certain weaknesses of these emerging tools in indirect discharge estimations, which we discuss in detail.

scholarly journals Reservoir Effects on Flood Peak Discharge at the Catchment Scale

2018 ◽  
Vol 54 (11) ◽  
pp. 9623-9636 ◽  
Author(s):  
E. Volpi ◽  
M. Di Lazzaro ◽  
M. Bertola ◽  
A. Viglione ◽  
A. Fiori
Keyword(s):  
Peak Discharge ◽  
Catchment Scale ◽  
Flood Peak

scholarly journals Benefits and limitations of data assimilation for discharge forecasting using an event-based rainfall–runoff model

2013 ◽  
Vol 13 (3) ◽  
pp. 583-596 ◽  
Author(s):  
M. Coustau ◽  
S. Ricci ◽  
V. Borrell-Estupina ◽  
C. Bouvier ◽  
O. Thual
Keyword(s):  
Data Assimilation ◽  
Hydrological Model ◽  
Peak Discharge ◽  
State Variables ◽  
Rainfall Runoff ◽  
Discharge Data ◽  
Southern France ◽  
Flood Peak ◽  
Event Based ◽  
The Impact

Abstract. Mediterranean catchments in southern France are threatened by potentially devastating fast floods which are difficult to anticipate. In order to improve the skill of rainfall-runoff models in predicting such flash floods, hydrologists use data assimilation techniques to provide real-time updates of the model using observational data. This approach seeks to reduce the uncertainties present in different components of the hydrological model (forcing, parameters or state variables) in order to minimize the error in simulated discharges. This article presents a data assimilation procedure, the best linear unbiased estimator (BLUE), used with the goal of improving the peak discharge predictions generated by an event-based hydrological model Soil Conservation Service lag and route (SCS-LR). For a given prediction date, selected model inputs are corrected by assimilating discharge data observed at the basin outlet. This study is conducted on the Lez Mediterranean basin in southern France. The key objectives of this article are (i) to select the parameter(s) which allow for the most efficient and reliable correction of the simulated discharges, (ii) to demonstrate the impact of the correction of the initial condition upon simulated discharges, and (iii) to identify and understand conditions in which this technique fails to improve the forecast skill. The correction of the initial moisture deficit of the soil reservoir proves to be the most efficient control parameter for adjusting the peak discharge. Using data assimilation, this correction leads to an average of 12% improvement in the flood peak magnitude forecast in 75% of cases. The investigation of the other 25% of cases points out a number of precautions for the appropriate use of this data assimilation procedure.

Effects of channel engineering on flood dynamics along the middle and lower Rhône over the last two centuries.

2021 ◽  
Author(s):  
Mathieu Lucas ◽  
Michel Lang ◽  
Jérôme Le Coz ◽  
Benjamin Renard ◽  
Hervé Piegay
Keyword(s):  
Peak Discharge ◽  
Anthropogenic Pressures ◽  
Flood Peak ◽  
Area Of Interest ◽  
Channel Engineering ◽  
Indirect Consequence ◽  
Channel Patterns ◽  
Flood Dynamics ◽  
The Impact ◽  
Flood Waves

<p>The Rhône River has undergone many anthropogenic transformations to improve his navigability and produce hydroelectricity since the mid-19th century. From the longitudinal dikes of the 1850’s to the hydroelectric diversion schemes of the 1950’s and 1960’s, these structures had a direct impact on the channel geometry along the 300km of river course between Lyon (France) and the Mediterranean Sea. An indirect consequence could be a change in the flood dynamics along the channel course, caused by the simplification of the channel patterns and the floodplain accretion. This communication aims to assess the potential changes in the flood propagation along the middle and lower Rhône valley throughout a century of anthropogenic reconfigurations of the channel. The possible impact of these human pressures on the inundation risk and the attenuation of the flood peak discharge is also discussed. Through the use of digitized hydrometric data recorded since 1840 on multiple stream gauges of the Rhône river, a variety of floods of the same type and magnitude are selected. The oceanic flood types (as described by Pardé, 1925) that take their origin from heavy rainfalls upstream of the area of interest are preferred. Thus, complex flood waves due to floods from the lower Rhône valley tributaries are avoided, to keep the analysis as simple as possible. The flood travel time and the peak discharge attenuation of the selected events are compared over the years of channel transformations, permitting us to estimate the impact of anthropogenic pressures on the flood dynamics.</p>

scholarly journals Deriving Design Flood Hydrograph Based on Conditional Distribution: A Case Study of Danjiangkou Reservoir in Hanjiang Basin

2016 ◽  
Vol 2016 ◽  
pp. 1-16 ◽  
Author(s):  
Changjiang Xu ◽  
Jiabo Yin ◽  
Shenglian Guo ◽  
Zhangjun Liu ◽  
Xingjun Hong
Keyword(s):  
Joint Probability ◽  
Flood Frequency ◽  
Peak Discharge ◽  
Flood Frequency Analysis ◽  
Design Flood ◽  
Copula Functions ◽  
Danjiangkou Reservoir ◽  
Flood Peak ◽  
Flood Hydrograph

Design flood hydrograph (DFH) for a dam is the flood of suitable probability and magnitude adopted to ensure safety of the dam in accordance with appropriate design standards. Estimated quantiles of peak discharge and flood volumes are necessary for deriving the DFH, which are mutually correlated and need to be described by multivariate analysis methods. The joint probability distributions of peak discharge and flood volumes were established using copula functions. Then the general formulae of conditional most likely composition (CMLC) and conditional expectation composition (CEC) methods that consider the inherent relationship between flood peak and volumes were derived for estimating DFH. The Danjiangkou reservoir in Hanjiang basin was selected as a case study. The design values of flood volumes and 90% confidence intervals with different peak discharges were estimated by the proposed methods. The performance of CMLC and CEC methods was also compared with conventional flood frequency analysis, and the results show that CMLC method performs best for both bivariate and trivariate distributions which has the smallest relative error and root mean square error. The proposed CMLC method has strong statistical basis with unique design flood composition scheme and provides an alternative way for deriving DFH.

The Annual Maximum Flood Peak Discharge Forecasting Using Hermite Projection Pursuit Regression with SSO and LS Method

2016 ◽  
Vol 31 (1) ◽  
pp. 461-477 ◽  
Author(s):  
Wen-chuan Wang ◽  
Kwok-wing Chau ◽  
Dong-mei Xu ◽  
Lin Qiu ◽  
Can-can Liu
Keyword(s):  
Projection Pursuit ◽  
Peak Discharge ◽  
Annual Maximum ◽  
Projection Pursuit Regression ◽  
Flood Peak ◽  
Annual Maximum Flood Peak

scholarly journals ANALISIS BANJIR DAN TINGGI MUKA AIR PADA RUAS SUNGAI CILIWUNG STA 7+646 s/d STA 15+049

2018 ◽  
Vol 7 (1) ◽  
pp. 43-49
Author(s):  
Redaksi Tim Jurnal
Keyword(s):  
Frequency Analysis ◽  
Return Period ◽  
Synthetic Data ◽  
Gumbel Distribution ◽  
Peak Discharge ◽  
Design Flood ◽  
Distribution Method ◽  
Flood Peak ◽  
Method Of Calculation ◽  
Flood Discharge

The problem of flooding in DKI Jakarta is considered normal because almost every year can hit the city of Jakarta especially during the rainy season. In DKI Jakarta itself there are several rivers, one of which is Ciliwung River which is the most influential river in DKI Jakarta which often cause flood every year. The purpose of this research is to know the location of flood / river flood that occurs in the segments along Ciliwung River STA 7 + 646 s / d STA 15 + 049. Data processing begins with the calculation of average rainfall, frequency analysis, and then hour-time rain distribution. Method of calculation of flood discharge using the synthetic unit of Nakayasu and Gama I synthetic data. Rainfall data using 2 observation stations for 3 years rain (2014-2016). In the frequency analysis used Gumbel distribution berdasrkan test results suitability data Smirnov- Kolmogorov and Chi-Square. The result of flood peak discharge design with HSS Nakayasu on return period Q5 = 687,80 m3 / dt, Q10 = 743,21 m3 / dt, Q20 = 796,36 m3 / s, Q50 = 865,15 m3 / dt, Q100 = 916,71 m3 / s, while flood peak discharge design with HSS Gama I on return period Q5 = 347,03 m3 / s, Q10 = 372,12 m3 / s, Q20 = 396,20 m3 / s, Q50 = 427, 36 m3 / s, Q100 = 450,71 m3 / s. The design flood discharge value approaching the measured debit value is HSS Nakayasu. Steps continued using HEC-RAS 4.1.0 software to determine the capacity of river catchment by using Nakayasu discharge. After analyzing using the software, most stationing of the Ciliwung River at STA 7 + 646 to STA 15 + 049 can not accommodate the planned discharge during the 20th anniversary period, hence the need for river improvements in the form of river normalization and elevation of dikes.

scholarly journals The effectiveness of polder systems on peak discharge capping of floods along the middle reaches of the Elbe River in Germany

2007 ◽  
Vol 4 (1) ◽  
pp. 211-241 ◽  
Author(s):  
S. Huang ◽  
J. Rauberg ◽  
H. Apel ◽  
K.-E. Lindenschmidt
Keyword(s):  
Spatial Differentiation ◽  
River System ◽  
Peak Discharge ◽  
Computational Time ◽  
Elbe River ◽  
Flood Peak ◽  
Monte Carlo Techniques ◽  
Main River ◽  
The Elbe River ◽  
Computational Resources

Abstract. In flood modelling, many one-dimensional (1-D) hydrodynamic models are too restricted in capturing the spatial differentiation of processes within a polder or system of polders and two-dimensional (2-D) models are very demanding in data requirements and computational resources. The latter is an important consideration when uncertainty analyses using the Monte Carlo techniques are to complement the modelling exercises. This paper describes the development of a quasi-2-D modeling approach, which still calculates the dynamic wave in 1-D but the discretisation of the computational units is in 2-D, allowing a better spatial representation of the flow in polders and avoiding large additional expenditure on data pre-processing and computational time. The model DYNHYD (1-D hydrodynamics) from the WASP5 modeling package was used as a basis for the simulations and extended to incorporate the quasi-2-D approach. A local sensitive analysis shows the sensitivity of parameters and boundary conditions on the filling volume of polders and capping of the peak discharge in the main river system. Two flood events on the Elbe River, Germany were used to calibrate and test the model. The results show a good capping effect on the flood peak by the proposed systems. The effect of capping reduces as the flood wave propagates downstream from the polders (up to 0.5 cm of capping is lost for each additional kilometer from the polders).

scholarly journals PERBANDINGAN BEBERAPA METODE DEBIT PUNCAK BANJIR RANCANGAN COMPARISON OF SOME PEAK DISCHARGE FLOOD DESIGN METHODS

GANEC SWARA ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 526
Author(s):  
HUMAIROH SAIDAH ◽  
ATAS PRACOYO ◽  
KHAIRUDIN KHAIRUDIN
Keyword(s):  
Design Method ◽  
Water Discharge ◽  
Peak Discharge ◽  
Design Flood ◽  
Flood Peak ◽  
Accuracy Test ◽  
Flood Discharge ◽  
Proper Design ◽  
Design Calculations ◽  
Selection Of

Peak discharge flood analysis is very crucial in waterworks design. The proper design flood discharge will produce effective construction dimensions as project requirement. Therefore, flood design calculations must be analyzed using appropriate methods. The problem in estimating design flood discharge is usually found in ungauged watersheds which do not have any water discharge measuring equipment.This study wants to test the flood design method using rain data input to be applied to the Babak River, so the result can be used as a guide in the selection of flood discharge calculation techniques in other ungauged watersheds.The accuracy test is carried out by comparing the results of these methods with the flood design resulted from a frequency analysis of the Annual Maximum Series. Based on the results of the calculation, the peak flood of the Harpers method has the smallest RE and RMSEP values are 8.960% and 88.546 respectively. Thus, it can be concluded that the calculation of the design of the flood peak Haspers method has the best accuracy of the analysis results when compared with the Melchior and Weduwen methods for Babak River.

Sign in / Sign up

Export Citation Format

Share Document