scholarly journals Synthesis of Chalcone and Flavanone Compound Using Raw Material of Acetophenone and Benzaldehyde Derivative

2010 ◽  
Vol 1 (2) ◽  
pp. 81-89
Author(s):  
Ismiyarto Ismiyarto ◽  
Sabirin Matsjeh ◽  
Chairil Anwar

Synthesis of flavanoid compounds of chalcone and flavanone groups have been conducted. Flavanoid Is one of the group natural products which is mostly found in plants and have been proved to have physiological activity as drug. In this research, chalcone proup compounds that being synthesized are: chalcone, 3,4-dimethoxychalcone, 2'-hidroxy-3,4-dimethoxychalcone where as compound of flavanone group that being synthesized is 3',4'-dimethoxyflavanone. The synthesis of chalcone group are carried out based on Claisen-Schmidt reaction by using raw material of aromatic aldehydes and aromatic ketones. The synthesis in carried out by stirring at the room temperature using alkali solution as catalyst and ethanol as solvent. The synthesis of 3',4'-dimethoxyflanone is made based on the nucleophilic 1,4 addition of the unsaturated α,β ketone. The synthesis is made by refluxing 2'-hydroxy-3,4-dimethoxychalcone in alkali condition for 12 hours. The identification of flavanoid compound is carried out by using spectroscopic IR, GC-MS and 1H-NMR methods. The result of each synthesis chalcone group are follows: chalcone as yellowish solid with m.p= 50 °C and the yield is 83.39%; 3,4-dimethoxychalcone as yellow solid with m.p= 57°C and the yield is 76.00% ; 2'-hydroxy-3,4-dimethoxychalcone as orange solid with m.p= 90 °C and the yield is 74.29%, for 3',4'-dimethoxyflavanone as pale yellow solid with m.p= 80 °C and the yield is 72.00%.

Author(s):  
Pan Xie ◽  
Cheng Xue ◽  
Cancan Wang ◽  
Dongdong Du ◽  
Sanshan Shi

A CF3SO2Na/Pd(OAc)2 co-catalyzed strategy is developed to produce aryl ketones via visible-light-induced decarboxylative cross-coupling of α-oxocarboxylic acids and aryl boronic acids. This process was perfomed under air at room temperature,...


Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 581
Author(s):  
Max Van Hoof ◽  
Santhini Pulikkal Veettil ◽  
Wim Dehaen

4-Sulfonyl-1,2,3-triazole scaffolds possess promising bioactivities and applications as anion binders. However, these structures remain relatively unexplored and efficient synthetic procedures for their synthesis remain desirable. A practical room-temperature, aerobic copper-catalyzed three-component reaction of aromatic ketones, sodium sulfinates, and azides is reported. This procedure allows for facile access to 4-sulfonyl-1,5-disubstituted-1,2,3-triazoles in yields ranging from 34 to 89%. The reaction proceeds via a sequential aerobic copper(II)chloride-catalyzed oxidative sulfonylation and the Dimroth azide–enolate cycloaddition.


Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1091
Author(s):  
Eva Gerold ◽  
Stefan Luidold ◽  
Helmut Antrekowitsch

The consumption of lithium has increased dramatically in recent years. This can be primarily attributed to its use in lithium-ion batteries for the operation of hybrid and electric vehicles. Due to its specific properties, lithium will also continue to be an indispensable key component for rechargeable batteries in the next decades. An average lithium-ion battery contains 5–7% of lithium. These values indicate that used rechargeable batteries are a high-quality raw material for lithium recovery. Currently, the feasibility and reasonability of the hydrometallurgical recycling of lithium from spent lithium-ion batteries is still a field of research. This work is intended to compare the classic method of the precipitation of lithium from synthetic and real pregnant leaching liquors gained from spent lithium-ion batteries with sodium carbonate (state of the art) with alternative precipitation agents such as sodium phosphate and potassium phosphate. Furthermore, the correlation of the obtained product to the used type of phosphate is comprised. In addition, the influence of the process temperature (room temperature to boiling point), as well as the stoichiometric factor of the precipitant, is investigated in order to finally enable a statement about an efficient process, its parameter and the main dependencies.


RSC Advances ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 5080-5085
Author(s):  
Lei Zheng ◽  
Chen Sun ◽  
Wenhao Xu ◽  
Alexandr V. Dushkin ◽  
Nikolay Polyakov ◽  
...  

We have developed I2/KH2PO2 and KI/P(OEt)3 strategy syntheses of esters from carboxylic acids and alcohols through different reaction mechanisms. The advantages of present protocol: mild conditions and late-stage diversification of natural products.


2005 ◽  
Vol 2005 (3) ◽  
pp. 171-172 ◽  
Author(s):  
Min Zhang ◽  
Yi-Qun Li

Aromatic aldehydes can be converted into the corresponding 1,1-diacetates rapidly in the presence of catalytic amounts of Ce(SO4)2·4H2O at room temperature in excellent yield under solvent-free conditions. The catalyst can easily be recovered and reused at least 4 times.


RSC Advances ◽  
2015 ◽  
Vol 5 (121) ◽  
pp. 100401-100407 ◽  
Author(s):  
Rajamani Rajmohan ◽  
Subramaniyan Gayathri ◽  
Pothiappan Vairaprakash

In a simple and conceptually designed method for the dehydration of fructose on a solid support, 5-hydroxymethylfurfural (HMF) was synthesized in more than 95% isolated yield from fructose under very mild conditions at room temperature.


2012 ◽  
Vol 174-177 ◽  
pp. 135-139
Author(s):  
Qing Bo Tian ◽  
Li Zong Chen ◽  
Li Na Xu ◽  
Yong Guang Fang

A brick material was prepared with marble wastes as main raw material by pressure forming and water-curing at room temperature. With the increases of the amounts of water additions, the compressive strength increased gradually and obtained a highest value of 34.8MPa in the sample of the ratio of cement: wastes=20:100 at 17.0% water addition, above which the strength had an adverse change and decreased. The addition of glass fiber had small effects on the strength, water absorbing rate and density comparing with that of wood flour. The strengths of sample had changed obviously with the increment of the forming pressures. However, the strength would fall because of the lamination caused by the recovering effects of the wood flour in the sample with replacement of the wood flour to marble wastes, as the forming pressures were higher than 5.0 MPa.


Sign in / Sign up

Export Citation Format

Share Document