scholarly journals FABRICATION AND EVALUATION OF SOLID DISPERSION CONTAINING GLIBENCLAMIDE

2018 ◽  
Vol 11 (8) ◽  
pp. 158
Author(s):  
Nikita Sehgal ◽  
Vishal Gupta N ◽  
Gowda Dv ◽  
Sivadasu P
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Stability Studies ◽  
Scanning Calorimetry ◽  
Dsc Studies

 Objective: The aim of the present study was to increase the dissolution rate of glibenclamide (GLIB) by molecular dispersion of drug in the polymeric matrix of Pluronic F-127.Methods: GLIB-loaded solid dispersions were formulated by fusion method. The formulated solid dispersions were characterized for scanning electron microscopy (SEM), X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and evaluated for percentage yield, drug content, solubility, and in vitro dissolution profile, and stability studies were conducted as per International Conference on Harmonisation guidelines Q1A in stability chamber, both at intermediate and accelerated conditions.Results: Both XRD and DSC studies suggested that crystalline GLIB was converted to amorphous form after loading into carrier. SEM studies revealed that the prepared solid dispersions were in the form of irregular particles with the absence of crystalline material. Due to this conversion of crystalline to amorphous state, formulated solid dispersions had shown improved dissolution rate profile of GLIB and stability studies suggested that formulated solid dispersions showed no significant changes in appearance and also in drug content.Conclusion: Thus, from the obtained results, it can be concluded that dissolution profile of GLIB can be improved by formulating as solid dispersion.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

scholarly journals Enhancement of dissolution rate of Olmesartan medoxomil using urea as carrier by different solid dispersion techniques

2018 ◽  
Vol 1 (1) ◽  
pp. 36-42
Author(s):  
B Sangameswaran ◽  
M Gomathi
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Olmesartan Medoxomil ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Poor Solubility ◽  
Co Precipitation

The poor solubility of drug substances in water and their low dissolution rate in aqueous G.I.T fluid often leads to insufficient bioavailability. As per Biopharmaceutical Classification System (BCS), Olmesartan belongs to the class-II category having poor solubility and high permeability. Since only dissolved drug can pass the gastrointestinal membrane, the proper solubility of the drug is ultimately desired. Its oral bioavailability is 26%. Hence, an attempt was made to enhance its solubility by formulating solid dispersions using different techniques viz., Melting, Kneading, Co-precipitation, Solvent evaporation and Physical mixing etc., Drug and carrier (Urea) in different ratios like 1: 1, 1: 2, 1: 3 and 1:4 were used for formulating solid dispersions. The compatibility of the drug with the carrier was checked by FTIR studies, these results revealed that there was no interaction between them. The angle of repose, bulk density, tapped density; Carr’s index and Hausner ratio were calculated for the micrometric characterization of all the solid dispersions. The drug content was found to be high and uniform in all formulations. The prepared Solid dispersion SEM4 (1:4) showed minimal wetting time of 13 seconds compared with the other formulations. In vitro dissolution, release studies in Phosphate buffer pH of 6.8 revealed that the prepared solid dispersions showed faster drug release compared with the pure drug.  The in vitro dissolution profile showed ascendency on increasing the carrier concentration

DEVELOPMENT OF SOLID DISPERSION TABLET OF CARVEDILOL TO IMPROVE SOLUBILITY

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 54-59
Author(s):  
S. S Shelake ◽  
◽  
R. G Gaikwad ◽  
S Patil ◽  
F. I. Mevekari ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Media ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
Water Soluble Drugs ◽  
Ft Ir

Crystalline state compounds are typically dissolution rate limited and dissolution rate is directly proportional to the solubility for BCS class II or class IV compounds. Solid dispersions are one of the most promising strategies to improve the oral bioavailability poorly water soluble drugs. The purpose of this study was to increase solubility of carvedilol by solid dispersion (SDs) technique with Poloxamer (PXM) 407 in aqueous media. The carvedilol- PXM 407 solid dispersion was prepared by solvent evaporation, kneading and melting method. It was characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), Fourier transformation infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM) and in vitro dissolution studies. The prepared solid dispersion were found to have higher dissolution rates as compared to intact carvedilol. During formulation of solid dispersion crystalline to amorphous transition has been observed.

scholarly journals Solid Dispersion Preparation by Different Methods to Improve Solubility & Dissolution Simvastatin

2021 ◽  
pp. 241-253
Author(s):  
Kamalpreet Kaur ◽  
Taranjit Kaur ◽  
Ajeet Pal Singh ◽  
Amar Pal Singh
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Methyl Cellulose ◽  
Competitive Inhibitor ◽  
In Vitro Dissolution ◽  
Absolute Bioavailability ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Gum Acacia

The improvement of a pure drug's solubility and dissolution rate in the treatment of hyperlipidemia. Simvastatin is a 5-percent absolute bioavailability selective competitive inhibitor of HMG Co-A reductase. For the selection of the carrier, a preliminary solubility investigation of solid dispersion was performed, and solid dispersion was made using Hydroxy Propyl Methyl Cellulose (HPMC) and gum acacia. Solid dispersion of medication with polymer was created and studied for solubility and in-vitro dissolution profile. Solid dispersion of drug with polymer has shown an increase in solubility and improved dissolution rate. On the obtained formulations, further FTIR, X-Ray, Scanning electron microscopy, and Differential scanning calorimetry experiments were conducted. The existence of amorphous form in a solid dispersion made with polymer in a 1:5 ratio is verified by characterization research. The research also showed that using a solid dispersion approach with Polymer, the dissolving rate of a pure medication may be significantly increased.

scholarly journals Artemether-Soluplus Hot-Melt Extrudate Solid Dispersion Systems for Solubility and Dissolution Rate Enhancement with Amorphous State Characteristics

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Ritesh A. Fule ◽  
Tarique S. Meer ◽  
Ajay R. Sav ◽  
Purnima D. Amin
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Amorphous State ◽  
Polymer Melt ◽  
Aqueous Solubility ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Hot Melt

This work studied artemether (ARTM) solid dispersion (SD) formulation using mixture of polymer excipient Soluplus, PEG 400, Lutrol F127, and Lutrol F68 melts at temperatures lower than the melting point of ARTM using a laboratory-size, single-screw rotating batch extruder. The effects of three surfactants PEG 400, Lutrol F127, and Lutrol F68 and parameters like mixing temperature, screw rotating speed, and residence time were systematically studied. SEM, XRD, and FT-IR were employed to investigate the evolution of ARTM’s dissolution into the molten excipient. Differential scanning calorimetry (DSC) was used to quantitatively study the melting enthalpy evolution of the drug. The results showed that the dissolution rate increased with increasing the ratio of polymer and surfactant to that of drug. It was concluded that the dissolution of the drug in the polymer melt is a convective diffusion process and that laminar distributive mixing can significantly enhance the dissolution rate. The aqueous solubility and dissolution rate of prepared solid dispersion were significantly enhanced. In vitro antimalarial studies revealed marked improvement in IC50 values. Thus hot-melt extrusion (HME) is a promising technology for improving solubility and dissolution profile of ARTM.

scholarly journals DEVELOPMENT AND IN VITRO DISSOLUTION STUDY OF BINARY AND TERNARY SOLID DISPERSIONS OF ACECLOFENAC

2019 ◽  
Author(s):  
Md. Shahidul Islam ◽  
Rasheda Akter Lucky
Keyword(s):  
Polyethylene Glycol ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Drug Carrier ◽  
Solid Dispersions ◽  
Weight Ratio ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Peg 6000

The poor aqueous solubility of the drug exhibits in variable dissolution rate and hence poor bioavailability. Aceclofenac is poorly water soluble drug. The aim of the present study was to improve the water solubility and the dissolution rate of Aceclofenac by solid dispersion technique using different water soluble polymers. The term solid dispersions refer to the dispersions of one or more active ingredients in an inert carrier or matrix at solid state. In this study, binary solid dispersion of Aceclofenac were prepared by fusion method using Polyethylene glycol 6000 (PEG 6000), Polyethylene glycol 4000 (PEG 4000), Poloxamer as carrier. Different drug-carrier weight ratio was used for this study. The effect of the carrier on the solubility and in-vitro dissolution were studied. It was found the drug was released 26.86% after 5 minutes and only 40.19% within 60 mins from active Aceclofenac on the other hand the release pattern of Aceclofenac from the binary SD formulation containing PEG 6000 in 1:5 ratio (Formulation coding: A5) showed the best result in comparison of other binary and ternary SD formulations which was 62.29% after 5 min and 83.03% within 60 mins. The hydrophilic polymers used for the preparation of solid dispersion are showed significant increase in the solubility of Aceclofenac.

scholarly journals FORMULATION OF SOLID DISPERSIONS FOR ENHANCEMENT OF SOLUBILITY AND DISSOLUTION RATE OF SIMVASTATIN

2021 ◽  
pp. 94-100
Author(s):  
PAYAL D. BORAWAKE ◽  
KAUSLYA ARUMUGAM ◽  
JITENDRA V. SHINDE
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Fourier Transforms ◽  
Drug Carrier ◽  
Solid Dispersions ◽  
Solvent Evaporation ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
Drug Content ◽  
Pvp K30

Objective: The objective of the present work was to formulate the solid dispersions of simvastatin for enhancement of its aqueous solubility and dissolution rate. Methods: In the present study, solid dispersions of simvastatin were prepared by Kneading and Solvent evaporation methods. The polymeric carriers like Polyethylene glycol (PEG) 6000 and Polyvinyl Pyrrolidone (PVP) K30 were used in different ratios (ratio of drug: carrier was 1:1, 1:2) to formulate solid dispersions. The prepared solid dispersions were characterized by differential scanning calorimetry (DSC), Fourier transforms infrared spectroscopy (FTIR), and evaluated for drug content, percentage yield, saturation solubility, in vitro dissolution studies. The best formula of the solid dispersion was selected according to the solubility and dissolution data. Results: The F7 formulation was found to be an optimized formulation containing PVP K30 in the ratio 1:1 prepared by solvent evaporation technique. The Drug content was found to be higher i.e. 94.89 in the F7 batch. The FT-IR spectra revealed that there was no interaction between drugs and carriers. DSC thermogram indicated entrapment of simvastatin in PVP K30 and the conversion of crystalline simvastatin into an amorphous form. The F7 formulation showed maximum drug release i.e. 98.60% in 60 min which is 2 times greater than pure drug making it an optimized formulation. Conclusion: The solubility of simvastatin was successfully enhanced through the solid dispersion technique. Solid dispersions prepared with solvent evaporation method were more soluble than solid dispersions prepared with kneading method with carrier PVP K30.

scholarly journals Effect of Amphiphilic Graft Co-Polymer Carrier on Solubility and Dissolution Enhancement of Ambrisentan

2021 ◽  
pp. 329-338
Author(s):  
Rahul Radke ◽  
Neetesh K. Jain
Keyword(s):  
Ftir Spectroscopy ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Dissolution Enhancement ◽  
Polymer Carrier ◽  
Dissolution Study

Aim: Ambrisentan is a endothelin type A selective receptor antagonist used in the management of pulmonary arterial hypertension. Ambrisentan is BCS Class II drug haves very poor solubility in water and shows incomplete absorption after oral administration. The present work was aimed to study the effect of amphiphilic graft co-polymer carrier on enhancement of solubility and dissolution rate of poorly water soluble drug ambrisentan. To improve the aqueous solubility of ambrisentan solid dispersion was formulated by using novel carrier amphiphilic graft co-polymer (Soluplus® ). Materials and Methods: Solid dispersion was prepared by kneading technique by utilizing various ratios of carrier. Obtained solid dispersions ware evaluated for solubility, percentage yield, drug content and in vitro dissolution study. Powder characterization was performed by infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Results: FTIR spectroscopy shows no interaction between drug and polymer. DSC study showed that endothermic peak of drug was completely disappeared in Solid dispersion suggesting complete miscibility of drug in Soluplus®. XRD study suggest the conversion of crystalline ambrisentan in to amorphous form. All solid dispersions prepared with Soluplus® as a carrier showed increase in solubility. Solubility of ambrisentan was found to be increased 7.17 fold in optimized SD formulation ASD5. In vitro dissolution study showed the faster drug release from SD formulation compare to its pure form. All solid dispersion formulation’s release more than 50% of drug in first 10 min. Conclusion: This study conclude that the preparation of amphiphilic graft co-polymer based solid dispersion prepared by kneading technique is found to be useful in enhancement the solubility and dissolution rate of ambrisentan.

scholarly journals DEVELOPMENT AND EVALUATION OF MONOLITHIC OSMOTIC TABLET OF KETOPROFEN: USING SOLID DISPERSION TECHNIQUE

2016 ◽  
Vol 8 (12) ◽  
pp. 41
Author(s):  
S. Kaushik ◽  
Kamla Pathak
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
Immediate Release ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 6000 ◽  
Environmental Media ◽  
Dispersion Technique

<p><strong>Objective: </strong>The aim of the present study was to develop and evaluate the monolithic osmotic tablet (MOT) composed of the solid dispersion of ketoprofen (KETO), a poorly water-soluble drug. Solid dispersion technique is generally used for immediate release, as this maximizes the amount of drug absorbed. Sustained release may be obtained by combining solid dispersion technique with MOT so as to increase the therapy efficacy and patient compliance.</p><p><strong>Methods: </strong>Solid dispersion of KETO was prepared by using solvent melt method with polyethylene glycol (PEG) 6000, a hydrophilic carrier. The ratio of KETO to PEG 6000 were 1:1, 1:3 and 1:5 (%w/w). These solid dispersions were characterized by differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) to ascertain whether there were any physicochemical interactions between drug and carrier.</p><p>The tablet core was prepared by using Polyox N80 (a suspending agent), sodium chloride (an osmotic agent), a solid dispersion consisting of PEG 6000 and KETO followed by a coating of cellulose acetate to make the monolithic osmotic tablet.</p><p><strong>Results: </strong>The results of DSC and PXRD indicated that the drug was in the amorphous state in solid dispersion when PEG 6000 was used as a carrier. The dissolution rate of the solid dispersion was much faster than those for the corresponding physical mixture and pure drug. The optimized MOT formulations were able to deliver KETO at the constant zero order release, above 95% <em>in vitro</em>, independent to environmental media and stirring rate. The release rate of KETO in the MOT is controlled by osmotic pressure, suspending agent and drug solubility in solid dispersion.</p><p><strong>Conclusion: </strong>The monolithic osmotic tablet containing solid dispersion has great potential in the controlled delivery of ketoprofen, a water-insoluble drug.</p><p><strong>Keywords: </strong>Ketoprofen, Monolithic osmotic tablet, Solid dispersion, Water insoluble</p>

scholarly journals IMPROVEMENT OF DISSOLUTION RATE OF VALSARTAN BY SOLID DISPERSION SYSTEM USING D(−) MANNITOL

2017 ◽  
Vol 10 (3) ◽  
pp. 288 ◽  
Author(s):  
Erizal Zaini ◽  
Salman Umar ◽  
Nurhidayah Nurhidayah
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
In Vitro Dissolution ◽  
Type I ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Dispersion System ◽  
Grinding Technique

ABSTRACTObjective: To improve dissolution rate of valsartan from solid dispersion system of valsartan and D(−) mannitol using co-grinding approach.Methods: Valsartan solid dispersion with different ratio of D(−) mannitol (1:1; 1:3 and 1: 5) were prepared by co-grinding method. Solid statecharacterization of the solid dispersion system was evaluated in term of crystallographic properties (powder X-ray diffraction), thermal behavior(differential scanning calorimetry [DSC]) and morphology (scanning electron microscope). The profile of dissolution rate was examined using USPdissolution apparatus type I at a temperature of 37±0.5°C.Results: Based on thermal analysis DSC and powder X-ray diffraction analysis, valsartan was transformed from semicrystalline phase to amorphousstate as indicated by the disappearance of its melting endothermic peaks and the characteristic diffraction peaks. The in vitro dissolution rate studyrevealed that all solid dispersion system showed significant increase in dissolution rate compared with the intact valsartan.Conclusion: Solid dispersion of valsartan with D(−) mannitol prepared by co-grinding technique has successfully improved the dissolution ratecompared with intact valsartan.Keywords: Valsartan, D(−) mannitol, Solid dispersion, Co-grinding, Dissolution rate.

Sign in / Sign up

Export Citation Format

Share Document