scholarly journals Artemether-Soluplus Hot-Melt Extrudate Solid Dispersion Systems for Solubility and Dissolution Rate Enhancement with Amorphous State Characteristics

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Ritesh A. Fule ◽  
Tarique S. Meer ◽  
Ajay R. Sav ◽  
Purnima D. Amin
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Amorphous State ◽  
Polymer Melt ◽  
Aqueous Solubility ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Hot Melt

This work studied artemether (ARTM) solid dispersion (SD) formulation using mixture of polymer excipient Soluplus, PEG 400, Lutrol F127, and Lutrol F68 melts at temperatures lower than the melting point of ARTM using a laboratory-size, single-screw rotating batch extruder. The effects of three surfactants PEG 400, Lutrol F127, and Lutrol F68 and parameters like mixing temperature, screw rotating speed, and residence time were systematically studied. SEM, XRD, and FT-IR were employed to investigate the evolution of ARTM’s dissolution into the molten excipient. Differential scanning calorimetry (DSC) was used to quantitatively study the melting enthalpy evolution of the drug. The results showed that the dissolution rate increased with increasing the ratio of polymer and surfactant to that of drug. It was concluded that the dissolution of the drug in the polymer melt is a convective diffusion process and that laminar distributive mixing can significantly enhance the dissolution rate. The aqueous solubility and dissolution rate of prepared solid dispersion were significantly enhanced. In vitro antimalarial studies revealed marked improvement in IC50 values. Thus hot-melt extrusion (HME) is a promising technology for improving solubility and dissolution profile of ARTM.

scholarly journals FABRICATION AND EVALUATION OF SOLID DISPERSION CONTAINING GLIBENCLAMIDE

2018 ◽  
Vol 11 (8) ◽  
pp. 158
Author(s):  
Nikita Sehgal ◽  
Vishal Gupta N ◽  
Gowda Dv ◽  
Sivadasu P
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Stability Studies ◽  
Scanning Calorimetry ◽  
Dsc Studies

 Objective: The aim of the present study was to increase the dissolution rate of glibenclamide (GLIB) by molecular dispersion of drug in the polymeric matrix of Pluronic F-127.Methods: GLIB-loaded solid dispersions were formulated by fusion method. The formulated solid dispersions were characterized for scanning electron microscopy (SEM), X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and evaluated for percentage yield, drug content, solubility, and in vitro dissolution profile, and stability studies were conducted as per International Conference on Harmonisation guidelines Q1A in stability chamber, both at intermediate and accelerated conditions.Results: Both XRD and DSC studies suggested that crystalline GLIB was converted to amorphous form after loading into carrier. SEM studies revealed that the prepared solid dispersions were in the form of irregular particles with the absence of crystalline material. Due to this conversion of crystalline to amorphous state, formulated solid dispersions had shown improved dissolution rate profile of GLIB and stability studies suggested that formulated solid dispersions showed no significant changes in appearance and also in drug content.Conclusion: Thus, from the obtained results, it can be concluded that dissolution profile of GLIB can be improved by formulating as solid dispersion.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

scholarly journals Amphiphilic Copolymer of Polyhedral Oligomeric Silsesquioxane (POSS) Methacrylate for Solid Dispersion of Paclitaxel

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1058 ◽  
Author(s):  
Suchismita Chatterjee ◽  
Tooru Ooya
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Aqueous Media ◽  
Amorphous State ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Aqueous Solubility ◽  
Polymer Mixtures ◽  
Scanning Calorimetry ◽  
New Formulation ◽  
Oligomeric Silsesquioxane

Suitable polymers for the homogeneous formulation of drug/polymer mixtures should be selected to correct the structural and physicochemical nature with a rapid dissolution rate. This study aimed to evaluate a copolymer prepared by the radical polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and a polyhedral oligomeric silsesquioxane (POSS) methacrylate bearing an ethyl (C2H5) group (MPC-ran-C2H5-POSS) as a carrier for the solid formulation of paclitaxel (PTX). A single-phase homogeneous formulation of PTX with the mixture of the MPC-ran-C2H5-POSS and polyvinylpyrrolidone (PVP) was prepared by a solvent method. The formulation of MPC-ran-C2H5-POSS/PVP/PTX enhanced the dissolution rate and the dissolved amount (approximately 90% within 40 min) without precipitation. The X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) analysis confirmed the presence of PTX as an amorphous state. The amphiphilic nature of the MPC-ran-C2H5-POSS contributed to enhancing the aqueous solubility of PTX. The new formulation is applicable for solid dispersion technique via the supersaturation of PTX in an aqueous media.

scholarly journals Solid Dispersion Preparation by Different Methods to Improve Solubility & Dissolution Simvastatin

2021 ◽  
pp. 241-253
Author(s):  
Kamalpreet Kaur ◽  
Taranjit Kaur ◽  
Ajeet Pal Singh ◽  
Amar Pal Singh
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Methyl Cellulose ◽  
Competitive Inhibitor ◽  
In Vitro Dissolution ◽  
Absolute Bioavailability ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Gum Acacia

The improvement of a pure drug's solubility and dissolution rate in the treatment of hyperlipidemia. Simvastatin is a 5-percent absolute bioavailability selective competitive inhibitor of HMG Co-A reductase. For the selection of the carrier, a preliminary solubility investigation of solid dispersion was performed, and solid dispersion was made using Hydroxy Propyl Methyl Cellulose (HPMC) and gum acacia. Solid dispersion of medication with polymer was created and studied for solubility and in-vitro dissolution profile. Solid dispersion of drug with polymer has shown an increase in solubility and improved dissolution rate. On the obtained formulations, further FTIR, X-Ray, Scanning electron microscopy, and Differential scanning calorimetry experiments were conducted. The existence of amorphous form in a solid dispersion made with polymer in a 1:5 ratio is verified by characterization research. The research also showed that using a solid dispersion approach with Polymer, the dissolving rate of a pure medication may be significantly increased.

Enhancement of Solubility and Dissolution Rate of Poorly Water Soluble Drug using Cosolvency and Solid Dispersion Techniques

1970 ◽  
Vol 1 (4) ◽  
pp. 349-356
Author(s):  
Meka Lingam ◽  
Vobalaboina Venkateswarlu
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physicochemical Characterization ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Water Soluble Drug ◽  
Poorly Water Soluble ◽  
Poorly Water Soluble Drug

The low aqueous solubility of celecoxib (CB) and thus its low bioavailability is a problem.    Thus, it is suggested to improve the solubility using cosolvency and solid dispersions techniques. Pure CB has solubility of 6.26±0.23µg/ml in water but increased solubility of CB was observed with increasing concentration of cosolvents like PEG 400, ethanol and propylene glycol. Highest solubility (791.06±15.57mg/ml) was observed with cosolvency technique containing the mixture of composition 10:80:10%v/v of water: PEG 400: ethanol. SDs with different polymers like PVP, PEG were prepared and subjected to physicochemical characterization using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), solubility and dissolution studies. These studies reveals that CB exists mainly in amorphous form in prepared solid dispersions of PVP, PEG4000 and PEG6000 further it can also be confirmed by solubility and dissolution rate studies. Solid dispersions of PV5 and PV9 have shown highest saturation solubility and dissolution rate

scholarly journals PREPARATION AND CHARACTERIZATION OF NANOCRYSTALS FOR SOLUBILITY AND DISSOLUTION RATE ENHANCEMENT OF PALIPERIDONE USING DIFFERENT HYDROPHILIC CARRIERS: IN VITRO-IN VIVO STUDY

2018 ◽  
Vol 11 (4) ◽  
pp. 393
Author(s):  
Moon Rajkumar ◽  
Gattani Surendra
Keyword(s):  
Dissolution Rate ◽  
Antipsychotic Agent ◽  
Aqueous Solubility ◽  
In Vivo Study ◽  
Scanning Calorimetry ◽  
Antisolvent Precipitation ◽  
Enhanced Solubility ◽  
Pure Drug

 Objective: The objective of this study was to increase the solubility and dissolution rate of paliperidone (PAL) by preparing its nanocrystals using different hydrophilic carriers by antisolvent precipitation technique.Methods: The nanoparticles (NP) were characterized for aqueous solubility, drug content, Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, particle size, and in vitro-in vivo analysis.Results: The results showed improved solubility and dissolution rate of NPs when compared to pure drug and physical mixture (PM). Solubility data showed a linear graph giving an indication that there is a gradual increase in the solubility profile of the drug with an increase in concentration of the carriers. At highest concentration, the solubility of NPs with Plasdone S630, Povidone K-25, and PVP K-30 found to be increased by 12 folds, 9 folds and 6 folds, respectively, as compared to pure drug. The release profile of NPs with Plasdone S630 in terms of dissolution efficiency at 60 min (DE60), initial dissolution rate (IDR), amount release in 15 min (Q15 min), and time for 75% release (t75%) shows better results when compared to pure drug, PM, and also NPs with povidone 25 and povidone 30. In vivo study reveals that optimized NPs elicited significant induction of cataleptic behavior which is the indication of antipsychotic agent(s) effect.Conclusion: The process antisolvent precipitation under constant stirring may be a promising method to produce stable PAL NPs with markedly enhanced solubility and dissolution rate due to nanonization with the increased surface area, improved wettability, and reduced diffusion pathway.

scholarly journals Design and Characterization of Phosphatidylcholine-Based Solid Dispersions of Aprepitant for Enhanced Solubility and Dissolution

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 407
Author(s):  
Sooho Yeo ◽  
Jieun An ◽  
Changhee Park ◽  
Dohyun Kim ◽  
Jaehwi Lee
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Promising Alternative ◽  
Dispersion System ◽  
Enhanced Solubility ◽  
Water Soluble Drugs

This study aimed to improve the solubility and dissolution of aprepitant, a drug with poor aqueous solubility, using a phosphatidylcholine (PC)-based solid dispersion system. When fabricating the PC-based solid dispersion, we employed mesoporous microparticles, as an adsorbent, and disintegrants to improve the sticky nature of PC and dissolution of aprepitant, respectively. The solid dispersions were prepared by a solvent evaporation technique and characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry, and X-ray powder diffraction. The FTIR results showed that aprepitant interacted with the PC carrier by both hydrogen bonds and van der Waals forces that can also be observed in the interaction between aprepitant and polymer carriers. The solid dispersions fabricated with only PC were not sufficient to convert the crystallinity of aprepitant to an amorphous state, whereas the formulations that included adsorbent and disintegrant successfully changed that of aprepitant to an amorphous state. Both the solubility and dissolution of aprepitant were considerably enhanced in the PC-based solid dispersions containing adsorbent and disintegrant compared with those of pure aprepitant and polymer-based solid dispersions. Therefore, these results suggest that our PC-based solid dispersion system is a promising alternative to conventional formulations for poorly water-soluble drugs, such as aprepitant.

scholarly journals Enhancement of dissolution rate of Olmesartan medoxomil using urea as carrier by different solid dispersion techniques

2018 ◽  
Vol 1 (1) ◽  
pp. 36-42
Author(s):  
B Sangameswaran ◽  
M Gomathi
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Olmesartan Medoxomil ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Poor Solubility ◽  
Co Precipitation

The poor solubility of drug substances in water and their low dissolution rate in aqueous G.I.T fluid often leads to insufficient bioavailability. As per Biopharmaceutical Classification System (BCS), Olmesartan belongs to the class-II category having poor solubility and high permeability. Since only dissolved drug can pass the gastrointestinal membrane, the proper solubility of the drug is ultimately desired. Its oral bioavailability is 26%. Hence, an attempt was made to enhance its solubility by formulating solid dispersions using different techniques viz., Melting, Kneading, Co-precipitation, Solvent evaporation and Physical mixing etc., Drug and carrier (Urea) in different ratios like 1: 1, 1: 2, 1: 3 and 1:4 were used for formulating solid dispersions. The compatibility of the drug with the carrier was checked by FTIR studies, these results revealed that there was no interaction between them. The angle of repose, bulk density, tapped density; Carr’s index and Hausner ratio were calculated for the micrometric characterization of all the solid dispersions. The drug content was found to be high and uniform in all formulations. The prepared Solid dispersion SEM4 (1:4) showed minimal wetting time of 13 seconds compared with the other formulations. In vitro dissolution, release studies in Phosphate buffer pH of 6.8 revealed that the prepared solid dispersions showed faster drug release compared with the pure drug.  The in vitro dissolution profile showed ascendency on increasing the carrier concentration

scholarly journals DEVELOPMENT AND EVALUATION OF MONOLITHIC OSMOTIC TABLET OF KETOPROFEN: USING SOLID DISPERSION TECHNIQUE

2016 ◽  
Vol 8 (12) ◽  
pp. 41
Author(s):  
S. Kaushik ◽  
Kamla Pathak
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
Immediate Release ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Peg 6000 ◽  
Environmental Media ◽  
Dispersion Technique

<p><strong>Objective: </strong>The aim of the present study was to develop and evaluate the monolithic osmotic tablet (MOT) composed of the solid dispersion of ketoprofen (KETO), a poorly water-soluble drug. Solid dispersion technique is generally used for immediate release, as this maximizes the amount of drug absorbed. Sustained release may be obtained by combining solid dispersion technique with MOT so as to increase the therapy efficacy and patient compliance.</p><p><strong>Methods: </strong>Solid dispersion of KETO was prepared by using solvent melt method with polyethylene glycol (PEG) 6000, a hydrophilic carrier. The ratio of KETO to PEG 6000 were 1:1, 1:3 and 1:5 (%w/w). These solid dispersions were characterized by differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) to ascertain whether there were any physicochemical interactions between drug and carrier.</p><p>The tablet core was prepared by using Polyox N80 (a suspending agent), sodium chloride (an osmotic agent), a solid dispersion consisting of PEG 6000 and KETO followed by a coating of cellulose acetate to make the monolithic osmotic tablet.</p><p><strong>Results: </strong>The results of DSC and PXRD indicated that the drug was in the amorphous state in solid dispersion when PEG 6000 was used as a carrier. The dissolution rate of the solid dispersion was much faster than those for the corresponding physical mixture and pure drug. The optimized MOT formulations were able to deliver KETO at the constant zero order release, above 95% <em>in vitro</em>, independent to environmental media and stirring rate. The release rate of KETO in the MOT is controlled by osmotic pressure, suspending agent and drug solubility in solid dispersion.</p><p><strong>Conclusion: </strong>The monolithic osmotic tablet containing solid dispersion has great potential in the controlled delivery of ketoprofen, a water-insoluble drug.</p><p><strong>Keywords: </strong>Ketoprofen, Monolithic osmotic tablet, Solid dispersion, Water insoluble</p>

scholarly journals IMPROVEMENT OF DISSOLUTION RATE OF VALSARTAN BY SOLID DISPERSION SYSTEM USING D(−) MANNITOL

2017 ◽  
Vol 10 (3) ◽  
pp. 288 ◽  
Author(s):  
Erizal Zaini ◽  
Salman Umar ◽  
Nurhidayah Nurhidayah
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
In Vitro Dissolution ◽  
Type I ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Dispersion System ◽  
Grinding Technique

ABSTRACTObjective: To improve dissolution rate of valsartan from solid dispersion system of valsartan and D(−) mannitol using co-grinding approach.Methods: Valsartan solid dispersion with different ratio of D(−) mannitol (1:1; 1:3 and 1: 5) were prepared by co-grinding method. Solid statecharacterization of the solid dispersion system was evaluated in term of crystallographic properties (powder X-ray diffraction), thermal behavior(differential scanning calorimetry [DSC]) and morphology (scanning electron microscope). The profile of dissolution rate was examined using USPdissolution apparatus type I at a temperature of 37±0.5°C.Results: Based on thermal analysis DSC and powder X-ray diffraction analysis, valsartan was transformed from semicrystalline phase to amorphousstate as indicated by the disappearance of its melting endothermic peaks and the characteristic diffraction peaks. The in vitro dissolution rate studyrevealed that all solid dispersion system showed significant increase in dissolution rate compared with the intact valsartan.Conclusion: Solid dispersion of valsartan with D(−) mannitol prepared by co-grinding technique has successfully improved the dissolution ratecompared with intact valsartan.Keywords: Valsartan, D(−) mannitol, Solid dispersion, Co-grinding, Dissolution rate.

Sign in / Sign up

Export Citation Format

Share Document