scholarly journals On the effectiveness of some methods of severe plastic deformation for bulk nanomaterials processing

2011 ◽  
Vol 1 (1) ◽  
pp. 36-42 ◽  
Author(s):  
M. V. Markushev
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Bulk Nanomaterials

Grain Boundary Design of Bulk Nanomaterials for Advanced Properties

2015 ◽  
Vol 5 ◽  
pp. 43-54 ◽  
Author(s):  
Ruslan Z. Valiev
Keyword(s):  
Plastic Deformation ◽  
Grain Boundary ◽  
Severe Plastic Deformation ◽  
Grain Boundaries ◽  
Metals And Alloys ◽  
New Approach ◽  
Petch Relation ◽  
Ultrafine Grained ◽  
Grain Boundary Segregations ◽  
Bulk Nanomaterials

Nanostructuring of metals and alloys by severe plastic deformation techniques is an effective way of enhancing their mechanical and functional properties. The features of the nanostructured materials produced by severe plastic deformation (SPD) are stipulated by forming of ultrafine-sized grains as well as by the state of grain boundaries. The concept of grain boundary (GB) design of ultrafine-grained metals and alloys is developed for enhancement of their properties by tailoring grain boundaries of different types (low-angle and high-angle ones, special and random, equilibrium and nonequilibrium) and formation of grain boundary segregations and precipitations by SPD processing. The paper presents experimental data demonstrating the super-strength and “positive” slope of the Hall-Petch relation when passing from micro-to nanostructured state in a number of metallic materials subjected to severe plastic deformation. The nature of the superior strength is associated with new strengthening mechanisms and the difficulty of generation of dislocations from grain boundaries with segregations. This new approach is used for achieving the enhanced strength in several commercial Al and Ti alloys as well as steels subjected to SPD processing.

Severe plastic deformation of Al-1%Cu Alloy processed by a Simple Cyclic Extrusion Compression technique

2018 ◽  
Vol 1 (1) ◽  
pp. 77-90
Author(s):  
Walaa Abdelaziem ◽  
Atef Hamada ◽  
Mohsen A. Hassan
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Deformation Behavior ◽  
Cast Alloy ◽  
Surface Hardness ◽  
Grain Structure ◽  
Compression Technique ◽  
Cu Alloy ◽  
Cyclic Extrusion Compression

Severe plastic deformation is an effective method for improving the mechanical properties of metallic alloys through promoting the grain structure. In the present work, simple cyclic extrusion compression technique (SCEC) has been developed for producing a fine structure of cast Al-1 wt. % Cu alloy and consequently enhancing the mechanical properties of the studied alloy. It was found that the grain structure was significantly reduced from 1500 µm to 100 µm after two passes of cyclic extrusion. The ultimate tensile strength and elongation to failure of the as-cast alloy were 110 MPa and 12 %, respectively. However, the corresponding mechanical properties of the two pass CEC deformed alloy are 275 MPa and 35%, respectively. These findings ensure that a significant improvement in the grain structure has been achieved. Also, cyclic extrusion deformation increased the surface hardness of the alloy by 49 % after two passes. FE-simulation model was adopted to simulate the deformation behavior of the material during the cyclic extrusion process using DEFORMTM-3D Ver11.0. The FE-results revealed that SCEC technique was able to impose severe plastic strains with the number of passes. The model was able to predict the damage, punch load, back pressure, and deformation behavior.

TECHNOLOGIES FOR MANUFACTURING NANOSTRUCTURED SURFACES

2020 ◽  
Author(s):  
Андрей Дмитриевич Бухтеев ◽  
Виктория Буянтуевна Бальжиева ◽  
Анна Романовна Тарасова ◽  
Фидан Гасанова ◽  
Светлана Викторовна Агасиева
Keyword(s):  
Plastic Deformation ◽  
Surface Modification ◽  
Severe Plastic Deformation ◽  
Pressing Pressure ◽  
Pressure Treatment ◽  
Structured Surfaces ◽  
Nanostructured Surfaces ◽  
Angular Pressing ◽  
Multilayer Composites ◽  
Compaction Of Powders

В данной статье рассматривается применение и технологии получения наноструктурированных поверхностей. Рассмотрены такие методы как компактирование порошков (изостатическое прессование, метод Гляйтера), интенсивная пластическая деформация (угловое кручение, равноканальное угловое прессование, обработка давлением многослойных композитов) и модификация поверхности (лазерная обработка, ионная бомбардировка). This article discusses the application and technology for obtaining nano-structured surfaces. Methods such as compaction of powders (isostatic pressing, Gleiter method), severe plastic deformation (angular torsion, equal-channel angular pressing, pressure treatment of multilayer composites) and surface modification (laser treatment, ion bombardment) are considered.

Deformation Behaviour and Ultrafine Grained Structure Development in Steels with Different Carbon Content Subjected to Severe Plastic Deformation

2007 ◽  
Vol 345-346 ◽  
pp. 45-48 ◽  
Author(s):  
Jozef Zrník ◽  
Sergey V. Dobatkin ◽  
Ondrej Stejskal
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Work Hardening ◽  
Favourable Effect ◽  
Tensile Behaviour ◽  
Dislocation Network ◽  
Strength Increase ◽  
Subgrain Structure ◽  
Low Carbon ◽  
Channel Angle

The article focuses on the results from recent experimental of severe plastic deformation of low carbon (LC) steel and medium carbon (MC) steel performed at increased temperatures. The grain refinement of ferrite respectively ferrite-pearlite structure is described. While LC steel was deformed by ECAP die (ε = 3) with a channel angle φ = 90° the ECAP severe deformation of MC steel was conducted with die channel angle of 120° (ε = 2.6 - 4). The high straining in LC steel resulted in extensively elongated ferrite grains with dense dislocation network and randomly recovered and polygonized structure was observed. The small period of work hardening appeared at tensile deformation. On the other side, the warm ECAP deformation of MC steel in dependence of increased effective strain resulted in more progressive recovery process. In interior of the elongated ferrite grains the subgrain structure prevails with dislocation network. As straining increases the dynamic polygonization and recrystallization became active to form mixture of polygonized subgrain and submicrocrystalline structure. The straining and moderate ECAP temperature caused the cementite lamellae fragmentation and spheroidzation as number of passes increased. The tensile behaviour of the both steels was characterized by strength increase however the absence of strain hardening was found at low carbon steel. The favourable effect of ferrite-pearlite structure modification due straining was reason for extended work hardening period observed at MC steel.

Sign in / Sign up

Export Citation Format

Share Document