scholarly journals Formulation and Evaluation of Piroxicam Fast Dissolving Tablets Using Direct Compression and Sublimation Method

2020 ◽  
Vol 10 (3-s) ◽  
pp. 17-25
Author(s):  
Inder Kumar ◽  
Dipima Chaudhary ◽  
Bhumika Thakur ◽  
Vinay Pandit
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Stability Study ◽  
Drug Dissolution ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Sublimation Method ◽  
The Stability

Objective: In the present research work, fast dissolving tablets of Piroxicam were formulated by two different techniques i.e. direct compression method and sublimation method using different superdisintegrants. Methods: Twelve formulations were prepared (PXM1 to PXM12) in which first six formulation were prepared by direct compression technique and other six formulation were prepared by sublimation method by using camphor as a sublimating agent. Result and Discussion: All the formulations were subjected for precompression, post compression parameters, and shows all the data within the specific limits. Formulation PXM4 containing 5 % crospovidone showed 99.480 ± 0.291 % drug release in 20 min which was more than the drug release of rest of the formulations. The optimized formulation PXM4 was compared with the marketed formulation and it revealed that drug release of PXM4 was found to be 99.397 ± 0.751 % in 20 min, which was greater than the marketed formulation. Finally, results were statistically analysed by the application of one way ANOVA and t-test. The stability study of the optimized formulation PXM4 showed no significant changes in, drug content, disintegration time and in-vitro drug release. Conclusion: Piroxicam can be successfully prepared using direct compression technique and it will enhance the drug dissolution, which will further increase absorption and bioavailability of the drug. Keywords: Direct compression, fast dissolving tablets, sublimation, Piroxicam.

scholarly journals Designing fabrication and evaluation of Oral fast Disintegrating tablet of Ranitidine HCL

2019 ◽  
Vol 9 (1) ◽  
pp. 95-102
Author(s):  
Afroza Akbar Patel ◽  
Siraj N Shaikh ◽  
Huzaifa Patel ◽  
Afzal Band ◽  
Ahmed Shaoor
Keyword(s):  
Drug Release ◽  
Optimization Technique ◽  
Research Work ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Compression Technique ◽  
Disintegration Time ◽  
Fenugreek Gum ◽  
Fast Disintegrating Tablets

The aim of this research work was to design develop & evaluate oral fast disintegrating tablets of Ranitidine HCL. The Orodispersible tablets of Ranitidine HCl were prepared by using direct Compression technique with a Synthetic Superdisintegrant such as Crosspovidone and a natural Superdisintegrant Fenugreek gum in different concentration. 32 factorial designs was applied to study the effect of independent variables,  concentration of Crosspovidone & Fenugreek gum on dependent variables like Cumulative % Drug release and Disintegration time by using design expert software. Prepared oral fast disintegrating tablets evaluated for Pre and Post-compression parameters. The prepared tablets exhibited satisfactory physico-chemical characterise especially fast disintegration & dissolution property. Full factorial design and optimization technique successfully used in the development oral fast disintegrating tablets. Comparing the all the formulations, formulation F9 was considered as optimized formulation which shows excellent fast disintegration, in vitro dissolution, and faster drug release within 6 min in comparison to other batches also stable in stability study. Keywords:  Fast disintegrating, Ranitidine, Crosspovidone, Gum, Optimizations, Water absorption ratio

scholarly journals Formulation and Evaluation of Novel Formulation for Diabetes Induced Hypertension using Modified Innate Superdisintegrant

2020 ◽  
Vol 10 (5) ◽  
pp. 240-250
Author(s):  
Vinay Pandit ◽  
Dipanker Kashive ◽  
Tarun Kumar Sharma
Keyword(s):  
The Body ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Opuntia Ficus Indica ◽  
Cardiovascular Morbidity And Mortality ◽  
Induced Hypertension

Objectives: Diabetes is a chronic disease and is a group of metabolic disorders characterized by high levels of sugar in blood (hyperglycemia). Hypertension is a major modifiable risk factor for cardiovascular morbidity and mortality in patients with diabetes. The objective of this research is to formulate Fast dissolving tablets of Pioglitazone and Cilnidipine for the effective treatment of diabetes induced hypertension. Methods: Six formulations were prepared by direct compression technique by using Opuntia ficus-indica as an innate superdisintegrant. Result and Discussion: All the formulations were subjected for precomprression, post compression parameters and shows all the data within the specific limits. F5 formulation with the mixture of polymers viz. Opuntia ficus indica, SSG, croscarmellose sodium, magnesium stearate, DiCOM showed comparatively fast disintegration and best release of drug than that of all other formulation. The tablets of F5 formulation disintegrated within 18.53 seconds can provide fast relief in the body. The in-vitro dissolution results revealed that the drug release of F5 formulation tablets was more than 90% for Pioglitazone and near to 70% for Cilnidipine within 30 minutes. Stability studies were performed on F5 formulation tablets showed no significant changes in color, disintegration time and in-vitro dissolution which showed that appearance of tablets was having no effect. Conclusion: Fast dissolving tablets of Pioglitazone and Cilnidipine can be successfully prepared using direct compression technique and it will enhance the drug dissolution, which will further increase absorption and bioavailability of both drugs. Keywords: Pioglitazone, Cilnidipine, diabetes induced hypertension, fast dissolving tablets, direct compression.

FORMULATION AND EVALUATION OF THYROID HORMONE (T4) IMMEDIATE RELEASE TABLETS

2022 ◽  
Vol 2 (1) ◽  
pp. 389-393
Author(s):  
Madhivardhana P ◽  
Rajalakshmi A N ◽  
Padmapriya S
Keyword(s):  
Thyroid Hormone ◽  
Drug Release ◽  
Research Work ◽  
Immediate Release ◽  
Flow Property ◽  
Direct Compression ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Good Flow

The aim of this research work is to formulate and evaluate Levothroxine sodium immediate release tablets prepared by direct compression method . Five formulations were evaluated for different pre and post compression parameter and in vitro drug release studies.The results of pre compression parameters of formluation 1 to 5 were compared with prescribed limits. It showed that formulation 1 to 5 powder blend exhibit good flow property and compressibility property. The disintegration time of all formulation was found to be in the range 2mins 09 secsto 4mins 03 secs.Thus, based on evaluation of different parameters it was concluded that formulation of immediate release tablet Levothyroxine sodium was successfully done and F-5 showed almost 93% drug release at 45 mins in Alkaline borate buffer( pH 10). Keywords: Thyroid hormone (T4), Immediate release tablets, Direct compression, Dissolution.

scholarly journals FORMULATION AND EVALUATION OF ORAL FAST DISINTEGRATING TABLET OF IBUPROFEN USING TWO SUPER DISINTEGRANTS

2017 ◽  
Vol 9 (4) ◽  
pp. 92
Author(s):  
Hrishav Das Purkayastha ◽  
Bipul Nath
Keyword(s):  
Drug Release ◽  
Magnesium Stearate ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Rapid Release ◽  
Weight Variation ◽  
Fast Disintegrating Tablet

Objective: The aim of the present investigation was to design and evaluate orally disintegrating tablet (ODT) of Ibuprofen, a NSAID drug used for the treatment of arthritis with a view to improve its oral bioavailability. The focus of the current study was to develop ODT of Ibuprofen using super disintegrants for ease of administration and its physicochemical characterization.Methods: Tablets were made from blends by direct compression method. All the ingredients were passed through mesh no. 80. All the ingredients were co-ground in a pestle motor. The resulting blend was lubricated with magnesium stearate and compressed into tablets using the Cadmach single punch (round shaped, 8 mm thick) machine.Results: Physicals parameters of the prepared tablets like Hardness, Weight variation, Friability, thickness, drug content etc. found within the limits. The disintegration time of prepared ODTs was in the range of 45 to 55 seconds. In vitro dispersion time was found to be 22 to 52 seconds which may be attributed to faster uptake of water due to the porous structure formed by super disintegrants. Short disintegration and faster release of ibuprofen were observed with Cross carmellose sodium as compared to sodium starch glycollate.Conclusion: It is concluded that F3 offered the relatively rapid release of Ibuprofen when compared with other formulations. The increase in the concentrations of super disintegrants may lead to increase in the drug release. The formulation prepared with cross carmellose sodium was offered the relatively rapid release of Ibuprofen when compared with other concentrations of both the super disintegrant. 

scholarly journals Formulation and evaluation of taste masked oral disintegrating tablets of lornoxicam

2021 ◽  
Vol 11 (5) ◽  
pp. 115-120
Author(s):  
Kritika Rai ◽  
Vivek Jain ◽  
Sunil Kumar Jain ◽  
Pushpendra Kumar Khangar
Keyword(s):  
Cation Exchange Resin ◽  
The Elderly ◽  
In Vitro Dissolution ◽  
Taste Masking ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Weight Variation ◽  
Croscarmellose Sodium

Orally disintegrating tablets (ODT) disintegrate quickly with saliva when administered into the oral cavity and taken without water or chewed. ODT are easy to take for children and the elderly, who may experience difficultly in taking ordinary oral preparations such as tablets, capsules, and powders.  The ODT threes substantial benefits for the patient (or elder) who cannot swallow (Dysphagia), or who is not permitted water intake due to disease. The reason of the current research was to prepare taste masking oral disintegrating tablets of poorly soluble lornoxicam (LXM) by direct compression technique using Kyron T-114 (cation exchange resin) as a taste masking agent. With in various ratios the Drug-resin of 1:4 was established to present best taste masking. The superdisintegrants used in formulation are croscarmellose sodium and cross povidone. Among these croscarmellose sodium demonstrated superior drug release. The tablets were evaluated for friability, weight variation, wetting time, hardness, disintegration time and uniformity of content. Optimized formulations were evaluated for in vitro dissolution test. Amongst all the formulations F-6 was found to be most successful tablets prepared by this technique had disintegration time of 30sec and % CDR 94.78 within 30min. Hence, this advance can be utilized for taste masking of bitter pharmaceutical ingredients leading to superior patient compliance. Keywords: Oral disintegration tablets, Lornoxicam, Kyron T-114, Superdisintegrants, Direct Compression.

scholarly journals FABRICATION AND CHARACTERIZATION OF FAST DISSOLVING FILMS OF ECLIPTA PROSTRATE LEAVES EXTRACT TO TREAT MOUTH ULCERS

2021 ◽  
pp. 263-271
Author(s):  
MANIKIRAN S. S. ◽  
NAGAM SANTHI PRIYA ◽  
B. AUBINE MOLLY ◽  
LAKSHMI PRASANTHI NORI
Keyword(s):  
Drug Release ◽  
Moisture Loss ◽  
Disintegration Time ◽  
Weight Variation ◽  
Eclipta Prostrata ◽  
Release Studies ◽  
Study Results ◽  
The Stability ◽  
Oral Films

Objective: This research focused on the design of fast dissolving herbal film of Eclipta Prostrate leaves extract for mouth ulcers. Methods: The extract of Eclipta Prostrata leaves was formulated as films by solvent casting method using various polymers viz., HPMC E5, HPMC E15, sodium alginate and PVA. The films were designed by using propylene glycol as a plasticizer, SSG as super disintegrate and honey as a sweetener. Furthermore, the films were evaluated for thickness, folding endurance, weight variation, % elongation, surface pH, % moisture uptake, % moisture loss, disintegration and in vitro drug release study. Results: The revealed that all the films were good in appearance and had a smooth texture. Out of all ten formulations, F3 and F5 disintegrated rapidly with a disintegration time of 27 and 32 seconds. The drug release studies revealed that all the formulations had a good release profile, but the F3 formulation showed rapid release i.e. 83.57% in 4 min. The stability studies revealed that the formulations F3 and F5 were found good with non-tackiness, easily separable and disintegrated at 29 and 33 sec respectively with no appearance and drug release. Conclusion: The research revealed that Eclipta prostrate leaves extract can be formulated into oral films for the treatment of mouth ulcers with improved bioavailability and expected patient compliance.

Fabrication and Evaluation of Mouth Dissolving Strips of Metoclopramide Hydrochloride by Using Novel Film Former

2021 ◽  
pp. 5515-5520
Author(s):  
Hemant A. Deokule ◽  
Smita S. Pimple ◽  
Praveen D. Chaudhari ◽  
Ajit S. Kulkarni
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Systemic Circulation ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Visual Appearance ◽  
Dsc Studies ◽  
Weight Variation ◽  
Metoclopramide Hydrochloride

Fast dissolving strips are used as novel approaches, as it dissolves rapidly in mouth and directly reaches the systemic circulation. In present research work, an attempt has been made to prepare mouth dissolving strips of Metoclopramide hydrochloride by using a novel film former Pullulan by solvent casting method. A33 full factorial design was utilized for the optimization of the effect of independent variables such as the amount of Pullulan, amount of PEF 400, amount of SSG on mechanical properties, and % drug release of strips. The drug compatibility studies using FTIR and DSC studies formulated strips were characterized for their physicochemical parameter like weight variation, visual appearance, folding endurance, thickness, disintegration time, drug content, and in vitro dissolution studies. FTIR and DSC studies revealed that the polymer is compatible with the drug. It was found that the optimum levels of the responses for a fast release strip could be obtained at low levels of Pullulan, PEG400, and SSG. The prepared strip was clear transparent and had a smooth surface. The surface pH was found 4.8 to 5.2 be in the range of to which is close to salivary pH, which indicates that strips may have less potential to irritate the oral mucosa, thereby they are comfortable. The drug release was found to be between 90.94 to 100.5% in 2 min. The in-vitro disintegration time of strips prepared with Pullulan was in the range of 19 to 57 sec. As the concentration of SSG increases the decrease in the disintegration time of strips a decrease. The dissolution rate increased with an increase in the concentration of SSG. Hence, it can be inferred that the fast dissolving oral strips of Metoclopramide hydrochloride may produce rapid action thereby improving bioavailability and enhance the absorption by avoiding the first-pass effect.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF SALBUTAMOL SULPHATE AND THEOPHYLLINE EXTENDED-RELEASE TABLETS USING MODIFIED POLYMERS

2018 ◽  
Vol 10 (8) ◽  
pp. 67
Author(s):  
Naveen Goyal ◽  
Anil Kumar
Keyword(s):  
Ethyl Cellulose ◽  
Extended Release ◽  
Research Work ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Direct Compression ◽  
Compression Method ◽  
Salbutamol Sulphate ◽  
Modified Polymers

Objective: The main objective of this research work was to design, prepare and evaluate extended release (ER) tablets of anti-asthmatic drugs (salbutamol sulphate and theophylline) by direct compression method using diverse ratios of hydroxypropyl methylcellulose (HPMC K100M) and ethyl cellulose (EC) along with some other excipients.Methods: Extended-release matrix tablets of salbutamol sulphate and theophylline were successfully fabricated by direct compression method and coded the formulations as F1 to F7 depending on the ratios of modified polymers. The core tablets composed of hydrophilic polymers of various ratios that allow the discharge of drugs at a controlled rate after coming in contact with the aqueous medium. The designed tablets were subjected to various assessment parameters i.e. friability test, hardness test, drug content consistency and In vitro dissolution tests.Results: Prepared formulations were subjected to various assessment parameters and the findings obtained were within the prescribed limit. To perform the in vitro drug dissolution tests of fabricated tablets, the calibration plots of pure drugs using various solvents i.e. 0.1N HCl, phosphate buffer (pH 6.8) and distilled water were plotted. Dosage forms F1-F7 containing ethyl cellulose and HPMC K100M in various concentration demonstrates the prolonged medications discharge for up to 8 h, among these formulations, F6 shows 95.32±0.24 % for salbutamol sulphate and 94.19±0.39 % for theophylline release at the end of 8 h. This finding reveals that a particular window of concentrations of ethylcellulose and HPMC K100M was capable of providing prolonged drugs discharge.Conclusion: The results obtained in this research work clearly showed a promising potential of extended-release tablets containing a specific ratio of HPMC K100M and ethylcellulose as a release rate controlling polymers for effective treatment of asthma and chronic obstructive pulmonary diseases (COPD).

scholarly journals FORMULATION AND IN VITRO EVALUATION OF FAST DISSOLVING TABLET OF VERAPAMIL HYDROCHLORIDE

2018 ◽  
Vol 10 (10) ◽  
pp. 93 ◽  
Author(s):  
Dattatraya M. Shinkar ◽  
Pooja S. Aher ◽  
Parag D. Kothawade ◽  
Avish D. Maru
Keyword(s):  
Drug Release ◽  
Phosphate Buffer ◽  
Research Work ◽  
Time Interval ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Verapamil Hydrochloride ◽  
Sodium Starch Glycolate ◽  
Croscarmellose Sodium

Objective: The main objective of this research work was to formulate and evaluate fast dissolving tablet of verapamil hydrochloride for the treatment of hypertension.Methods: In this study, fast dissolving tablet were prepared by wet granulation method by using croscarmellose sodium and sodium starch glycolate as superdisintegrants in the concentration of 2%, 4%, and 6%. Polyvinyl pyrollidone K30 is used as a binder. The designed tablets were subjected to various assessment parameters like friability test, hardness test, disintegration test, wetting time, in vitro drug release and drug content.Results: All the prepared formulations were subjected to various assessment parameters, and the findings obtain within the prescribed limit. The calibration curve of pure drug using various solvents like distilled water, phosphate buffer pH 6.8 was plotted. F1-F9 containing croscarmellose sodium and sodium starch glycolate in various concentration demonstrate the minimum disintegration time. Among all these formulations F8 shows disintegration time upto 19±0.06 seconds due to the high concentration of superdisintegrants. In vitro drug release was tested in phosphate buffer pH 6.8 at a time interval of 0, 1, 3,6,9,12,15 min. The F8 shows drug release 98.5±0.567%. Accelerated stability study of optimized formulation (F8) up to 2 mo showed there was no change in disintegration time and percentage drug release.Conclusion: The results obtained in the research work clearly showed a promising potential of fast dissolving tablets containing a specific ratio of crosscarmellose sodium and sodium starch glycolate as superdisintegrants for the effective treatment of hypertension. 

scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF MECLOFENAMATE FAST DISSOLVING TABLETS

2021 ◽  
Vol 10 (1) ◽  
pp. 59-67
Author(s):  
Mahipal Shakkarwal ◽  
Dr. Mukesh Sharma ◽  
Dr. Ram Garg ◽  
Shankar Lal Soni ◽  
Gopal Kumar Paswan ◽  
...  
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Suitable Treatment ◽  
The Stability

The demands for fast dissolving tablets have received ever increasing day by day during the last 10-15 years for the onset of action. In the present study, the effect of superdisintegrant was compared with synthetic super disintegrants and other conventional super disintegrants in the of fast dissolving tablet formulation of Meclofenamate. Meclofenamate is an antihypertensive drug and in case of hypertension immediate treatment is required so the proposed investigation is totally based to provide the suitable treatment for hypertension. In the present work 9 formulations of Fast dissolving tablets of Cilnidipine were prepared by using Synthesized Co-proceed was evaluated and compiles with the official standards, parameters and specifications. Various formulations were prepared using four different superdisintegrant namely- kyron T-304, sodium starch glycolate, cross carmelose sodium with three concentrations (2%, 4%, 6%) by direct compression method. The blend was evaluated for pre-compression parameters like Angle of repose , bulk density , tapped density , and then tablet  evaluated post-compression parameters like thickness , drug content , hardness , weight variation  , wetting time , friability , disintegration time , dissolution time, drug release study. Formulation A8 showed the lowest disintegration time and in-vitro dissolution studies recorded that formulation A8 showed 98.64% drug release at the end of 3 minutes. The best formulations were also found to be stable and optimized formulations were subjected to the stability studies as per ICH guideline and standards.

Sign in / Sign up

Export Citation Format

Share Document