Organosilica-Modified Multiblock Copolymers for Membrane Gas Separation

Organosubstituted silica derivatives were synthesized and investigated as modifiers of block copolymers based on macroinitiator and 2,4-toluene diisocyanate. A peculiarity of the modified block copolymers is the existence in their structure of coplanar rigid polyisocyanate blocks of acetal nature (O-polyisocyanates). Organosubstituted silica derivatives have a non-additive effect on high-temperature relaxation and α-transitions of modified polymers and exhibit the ability to influence the supramolecular structure of block copolymers. The use of the developed modifiers leads to a change in the gas transport properties of block copolymers. The increase of the permeability coefficients is due to the increase of the diffusion coefficients. At the same time, the gas solubility coefficients do not change. An increase in the ideal selectivity for a number of gas pairs is observed. An increase in the selectivity for the CO2/N2 gas pair (from 25 to 39) by 1.5 times demonstrates the promising use of this material for flue gases separation.

Charge Modification as a Mechanism for Tunable Properties in Polymer–Surfactant Complexes

Oppositely charged polymer–surfactant complexes are frequently explored as a function of phase space defined by the charge ratio Z, (where Z = [+polymer]/[−surfactant]), commonly accessed through the surfactant concentration. Tuning the phase behaviour and related properties of these complexes is an important tool for optimising commercial formulations; hence, understanding the relationship between Z and bulk properties is pertinent. Here, within a homologous series of cationic hydroxyethyl cellulose (cat-HEC) polymers with minor perturbations in the degree of side chain charge modification, phase space is instead explored through [+polymer] at fixed Cpolymer. The nanostructures were characterised by small-angle neutron scattering (SANS) in D2O solutions and in combination with the oppositely charged surfactant sodium dodecylsulfate (h- or d-SDS). Scattering consistent with thin rods with an average radius of ∼7.7 Å and length of ∼85 Å was observed for all cat-HEC polymers and no significant interactions were shown between the neutral HEC polymer and SDS (CSDS < CMC). For the charge-modified polymers, interactions with SDS were evident and the radius of the formed complexes grew up to ∼15 Å with increasing Z. This study demonstrates a novel approach in which the Z phase space of oppositely charged polymer–surfactant complexes can be controlled at fixed concentrations.

Novel Chemical Architectures Based on Beta-Cyclodextrin Derivatives Covalently Attached on Polymer Spheres

This study presents the synthesis and characterization of polymer derivatives of beta-cyclodextrin (BCD), obtained by chemical grafting onto spherical polymer particles (200 nm) presenting oxirane functional groups at their surface. The polymer spheres were synthesized by emulsion polymerization of styrene (ST) and hydroxyethyl methacrylate (HEMA), followed by the grafting on the surface of glycidyl methacrylate (GMA) by seeded emulsion polymerization. The BCD-polymer derivatives were obtained using two BCD derivatives with hydroxylic (BCD-OH) and amino groups (BCD-NH2). The degree of polymer covalent functionalization using the BCD-OH and BCD-NH2 derivatives were determined to be 4.27 and 19.19 weight %, respectively. The adsorption properties of the materials were evaluated using bisphenol A as a target molecule. The best fit for the adsorption kinetics was Lagergren’s model (both for Qe value and for R2) together with Weber’s intraparticle diffusion model in the case of ST-HEMA-GMA-BCD-NH2. The isothermal adsorption evaluation indicated that both systems follow a Langmuir type behavior and afforded a Qmax value of 148.37 mg g−1 and 37.09 mg g−1 for ST-HEMA-GMA-BCD-NH2 and ST-HEMA-GMA-BCD-OH, respectively. The BCD-modified polymers display a degradation temperature of over 400 °C which can be attributed to the existence of hydrogen bonds and BCD thermal degradation pathway in the presence of the polymers.

Tight Binding of Plasmid DNA With Self-Assembled Tetramethylguanidinium Conjugated Polyethylenimine Suppresses Transfection Efficiency

Here, we have demonstrated that on modification of linear polyethylenimine (lPEI, LP) with amphiphilic 3-bromopropyltetramethylguanidinium (PTMG) linker, the transfection efficiency exhibited by the modified polymers decreased while cell viability improved. A series of LP-PTMG polymers was synthesized by the reaction of varying amounts of 3-bromopropyl tetramethylguanidinium linker with lPEI (25 kDa). These modified polymers interacted efficiently with pDNA and formed nanosized complexes as shown by dynamic light scattering analysis. The size of the complexes in the series LP-PTMG/pDNA was observed in the range of ∼178–205 nm. The interaction of modified polymers with plasmid DNA was stronger than linear PEI as evidenced by heparin release assay which showed ∼83% pDNA release from LP-PTMG-3/pDNA complexes in comparison to ∼95% in lPEI/pDNA complexes on treatment with same amount of heparin suggesting the formation of self-assembled structures in modified polymers. The transfection studies in HeLa and Chinese hamster ovary cells showed a decrease in transfection efficiency of LP-PTMG polymers, the reason for this may be strong binding of modified polymers with pDNA due to accumulation of charge on the surface. This finding showed the significance of optimum binding of polymer and DNA to form polyplexes as well as release of DNA from the polyplexes.

Blend Modified Polymers (Polyethersulfone, Expandable Polystyrene, Polyvenylidinefluride) as a Membrane for Microbial Fuel Cell

In this work membrane (proton exchange membrane) by using the blend polymers (polyethersulfone (PES), Expandable polystyrene (EPS), polyvenylidinefluride polymer (PVDF)) were prepared. This membrane was modified by adding organic sulfonic acid to the blend solution precasting process, and sulfonated by dipping it in diluted sulfuric acid (H2SO460%) post casting process. The sulfonation was confirmed via FTIR spectra. The sulfonated membrane was characterized by proton conductivity, ion exchange capacity (IEC), (SO3H)content, and water uptake. Microbial Fuel Cell (MFC) is characterized by electrochemical polarization tests and power densities obtained from it used to evaluate the efficiency of the membrane in the cell.