The Concept of Building Petrothermal Thermal Power Plants

2021 ◽  
Vol 1 (42) ◽  
pp. 44-49
Author(s):  
Valentin Gusarov ◽  
◽  
Dmitriy Pisarev ◽  
Elena Gusarova ◽  
◽  
...  
Keyword(s):  
Thermal Energy ◽  
Power Plants ◽  
Thermal Power ◽  
Hydrocarbon Fuels ◽  
Earth’S Crust ◽  
Fuel Oil ◽  
Research Purpose ◽  
Electricity Supply ◽  
Thermal Power Plants ◽  
Earth's Crust

The article describes he prospect of using petrothermal energy for the needs of public utilities and electricity generation. (Research purpose) The research purpose is in justifying a new method for developing deep high-temperature layers of the earth’s crust in order to obtain a hot coolant for petrothermal thermal power plants that provide heat and electricity supply systems for rural settlements and agro-industrial facilities. (Materials and methods) In rural areas where there are small cities, the population uses traditional hydrocarbon fuels for heat and electricity supply to the residential sector and public infrastructure: natural gas, fuel oil, diesel fuel, coal, which have a high cost and logistical losses. (Results and discussion) K.E. Tsiolkovsky described a method for obtaining thermal energy from the earth’s interior by drilling wells, heating the coolant and feeding it to the surface for further use. The hot layers of the earth’s crust are present throughout the land and sea areas of the world, but the temperature gradient in various places ranges from 2.5 to 4 degrees Celsius per 100 meters of depth. Petrothermal thermal power plants are cogeneration power plants, the efficiency of which can reach 80-85 percent and their location is possible in all climatic zones. (Conclusions) Petrothermal energy is an affordable source of thermal energy that can replace hydrocarbon fuels, nuclear energy, and low-efficiency solar and wind energy in Russia. In any small town or village that is cut off from centralized energy networks, it is possible to build a local thermal power plant that does not require the purchase of hydrocarbon fuel.

On the prospect of introduction of plasma ignition in power boilers

2019 ◽  
Vol 12 (1) ◽  
pp. 22-28
Author(s):  
V. Ye. Mikhailov ◽  
S. P. Kolpakov ◽  
L. A. Khomenok ◽  
N. S. Shestakov
Keyword(s):  
Russian Federation ◽  
Solid Fuel ◽  
Power Plants ◽  
Thermal Power ◽  
Fuel Oil ◽  
Solid Fuels ◽  
Thermal Power Plants ◽  
Plasma Ignition ◽  
The Russian Federation ◽  
Capital Construction

One of the most important issues for modern domestic power industry is the creation and further widespread introduction of solid propellant energy units for super-critical steam parameters with high efficiency (43–46%) and improved environmental parameters. This will significantly reduce the use of natural gas.At the same time, one of the major drawbacks of the operation of pulverized coal power units is the need to use a significant amount of fuel oil during start-up and shutdown of boilers to stabilize the burning of the coal torch in the variable boiler operating modes.In this regard, solid fuel TPPs need to be provided with fuel oil facilities, with all the associated problems to ensure the performance (heating of fuel oil in winter), reliability and safety. All of the above problems increase both the TPP capital construction costs, and the electricity generating cost.A practical solution to the above problems at present is the use of a plasma technology for coal torch ignition based on thermochemical preparation of fuel for combustion. The materials of the developments of JSC “NPO CKTI” on application of plasmatrons in boilers of thermal power plants at metallurgical complexes of the Russian Federation are also considered.Plasma ignition systems for solid fuels in boilers were developed by Russian specialists and were introduced at a number of coal-fi red power plants in the Russian Federation, Mongolia, North Korea, and Kazakhstan. Plasma ignition of solid fuels is widely used in China for almost 30% of power boilers.The introduction of plasma-energy technologies will improve the energy efficiency of domestic solid-fuel thermal power plants and can be widely implemented in the modernization of boilers.During the construction of new TPPs, the construction of fuel oil facilities can be abandoned altogether, which will reduce the capital costs of the construction of thermal power plants, reduce the construction footprint, and increase the TPP safety.

scholarly journals Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants

2019 ◽  
Vol 1 (4) ◽  
Author(s):  
Alejandro Calderón ◽  
Camila Barreneche ◽  
Anabel Palacios ◽  
Mercè Segarra ◽  
Cristina Prieto ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Solid Particle ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Power Plants ◽  
Thermal Power ◽  
Heat Transfer Fluid ◽  
Thermal Power Plants ◽  
Solar Thermal Power

scholarly journals On the issue of fire hazard the fuel oil facilities of thermal power plants

2016 ◽  
Vol 92 ◽  
pp. 01038
Author(s):  
Arkadiy V. Zakharevich ◽  
Dmitriy N. Tsymbalov
Keyword(s):  
Power Plants ◽  
Fire Hazard ◽  
Thermal Power ◽  
Fuel Oil ◽  
Thermal Power Plants

Mechanism of Upgrading Low-Grade Solar Thermal Energy and Experimental Validation

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Hui Hong ◽  
Hongguang Jin ◽  
Jun Sui ◽  
Jun Ji
Keyword(s):  
Energy Level ◽  
Thermal Energy ◽  
Power Plants ◽  
Thermal Power ◽  
Chemical Energy ◽  
Solar Thermal ◽  
Low Grade ◽  
Thermal Power Plants ◽  
Solar Thermal Energy ◽  
Middle Temperature

Solar thermochemical processes inherently included the conversion of solar thermal energy into chemical energy. In this paper, a new mechanism of upgrading the energy level of solar thermal energy at around 200°C was revealed based on the second law thermodynamics and was then experimentally proven. An expression was derived to describe the upgrading of the energy level from low-grade solar thermal energy to high-grade chemical energy. The resulting equation explicitly reveals the interrelations of energy levels between middle-temperature solar thermal energy and methanol fuel, and identifies the interactions of mean solar flux and the reactivity of methanol decomposition. The proposed mechanism was experimentally verified by using the fabricated 5kW prototype of the receiver∕reactor. The agreement between the theoretical and the experimental results proves the validity of the mechanism for upgrading the energy level of low-grade solar thermal energy by integrating clean synthetic fuel. Moreover, the application of this new middle-temperature solar∕methanol hybrid thermochemical process into a combined cycle is expected to have a net solar-to-electric efficiency of about 27.8%, which is competitive with other solar-hybrid thermal power plants using high-temperature solar thermal energy. The results obtained here indicate the possibility of utilizing solar thermal energy at around 200°C for electricity generation with high efficiency by upgrading the energy level of solar thermal energy, and provide an enhancement to solar thermal power plants with the development of this low-grade solar thermochemical technology in the near future.

Repowering: An Option for Refurbishment of Old Thermal Power Plants in Latin-American Countries

2010 ◽  
Author(s):  
Washington Orlando Irrazabal Bohorquez ◽  
Joa˜o Roberto Barbosa ◽  
Luiz Augusto Horta Nogueira ◽  
Electo E. Silva Lora
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Power Plants ◽  
Thermal Power ◽  
Rankine Cycle ◽  
Combined Cycle ◽  
Fuel Oil ◽  
Thermal Power Plants

The operational rules for the electricity markets in Latin America are changing at the same time that the electricity power plants are being subjected to stronger environmental restrictions, fierce competition and free market rules. This is forcing the conventional power plants owners to evaluate the operation of their power plants. Those thermal power plants were built between the 1960’s and the 1990’s. They are old and inefficient, therefore generating expensive electricity and polluting the environment. This study presents the repowering of thermal power plants based on the analysis of three basic concepts: the thermal configuration of the different technological solutions, the costs of the generated electricity and the environmental impact produced by the decrease of the pollutants generated during the electricity production. The case study for the present paper is an Ecuadorian 73 MWe power output steam power plant erected at the end of the 1970’s and has been operating continuously for over 30 years. Six repowering options are studied, focusing the increase of the installed capacity and thermal efficiency on the baseline case. Numerical simulations the seven thermal power plants are evaluated as follows: A. Modified Rankine cycle (73 MWe) with superheating and regeneration, one conventional boiler burning fuel oil and one old steam turbine. B. Fully-fired combined cycle (240 MWe) with two gas turbines burning natural gas, one recuperative boiler and one old steam turbine. C. Fully-fired combined cycle (235 MWe) with one gas turbine burning natural gas, one recuperative boiler and one old steam turbine. D. Fully-fired combined cycle (242 MWe) with one gas turbine burning natural gas, one recuperative boiler and one old steam turbine. The gas turbine has water injection in the combustion chamber. E. Fully-fired combined cycle (242 MWe) with one gas turbine burning natural gas, one recuperative boiler with supplementary burners and one old steam turbine. The gas turbine has steam injection in the combustion chamber. F. Hybrid combined cycle (235 MWe) with one gas turbine burning natural gas, one recuperative boiler with supplementary burners, one old steam boiler burning natural gas and one old steam turbine. G. Hybrid combined cycle (235 MWe) with one gas turbine burning diesel fuel, one recuperative boiler with supplementary burners, one old steam boiler burning fuel oil and one old steam turbine. All the repowering models show higher efficiency when compared with the Rankine cycle [2, 5]. The thermal cycle efficiency is improved from 28% to 50%. The generated electricity costs are reduced to about 50% when the old power plant is converted to a combined cycle one. When a Rankine cycle power plant burning fuel oil is modified to combined cycle burning natural gas, the CO2 specific emissions by kWh are reduced by about 40%. It is concluded that upgrading older thermal power plants is often a cost-effective method for increasing the power output, improving efficiency and reducing emissions [2, 7].

Reducing the Number of Turbine Starts in Concentrating Solar Power Plants Through the Integration of Thermal Energy Storage

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Rafael Guédez ◽  
James Spelling ◽  
Björn Laumert
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Power Plants ◽  
Thermal Power ◽  
Solar Thermal ◽  
Annual Number ◽  
Thermal Power Plants ◽  
Solar Thermal Power ◽  
Solar Power Plants

The operation of steam turbine units in solar thermal power plants is very different than in conventional base-load plants. Due to the variability of the solar resource, much higher frequencies of plant start-ups are encountered. This study provides an insight to the influence of thermal energy storage (TES) integration on the typical cycling operation of solar thermal power plants. It is demonstrated that the integration of storage leads to significant reductions in the annual number of turbine starts and is thus beneficial to the turbine lifetime. At the same time, the effects of storage integration on the electricity costs are analyzed to ensure that the designs remain economically competitive. Large storage capacities, can allow the plant to be shifted from a daily starting regime to one where less than 20 plant starts occur annually. Additionally, the concept of equivalent operating hours (EOHs) is used to further analyze the direct impact of storage integration on the maintenance planning of the turbine units.

Sign in / Sign up

Export Citation Format

Share Document