scholarly journals Squeezing-enhanced communication without a phase reference

Quantum ◽  
2021 ◽  
Vol 5 ◽  
pp. 608
Author(s):  
Marco Fanizza ◽  
Matteo Rosati ◽  
Michalis Skotiniotis ◽  
John Calsamiglia ◽  
Vittorio Giovannetti
Keyword(s):  
Phase Noise ◽  
Photon Number ◽  
Upper And Lower Bounds ◽  
Limiting Factor ◽  
Long Distance ◽  
Squeezed Light ◽  
Low Energies ◽  
Distance Communication ◽  
Quantum Gaussian States ◽  
Photon States

We study the problem of transmitting classical information using quantum Gaussian states on a family of phase-noise channels with a finite decoherence time, such that the phase-reference is lost after m consecutive uses of the transmission line. This problem is relevant for long-distance communication in free space and optical fiber, where phase noise is typically considered as a limiting factor. The Holevo capacity of these channels is always attained with photon-number encodings, challenging with current technology. Hence for coherent-state encodings the optimal rate depends only on the total-energy distribution and we provide upper and lower bounds for all m, the latter attainable at low energies with on/off modulation and photodetection. We generalize this lower bound to squeezed-coherent encodings, exhibiting for the first time to our knowledge an unconditional advantage with respect to any coherent encoding for m=1 and a considerable advantage with respect to its direct coherent counterpart for m>1. This advantage is robust with respect to moderate attenuation, and persists in a regime where Fock encodings with up to two-photon states are also suboptimal. Finally, we show that the use of part of the energy to establish a reference frame is sub-optimal even at large energies. Our results represent a key departure from the case of phase-covariant Gaussian channels and constitute a proof-of-principle of the advantages of using non-classical, squeezed light in a motivated communication setting.

scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

scholarly journals Quantum repeaters based on concatenated bosonic and discrete-variable quantum codes

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Filip Rozpędek ◽  
Kyungjoo Noh ◽  
Qian Xu ◽  
Saikat Guha ◽  
Liang Jiang
Keyword(s):  
Continuous Variable ◽  
Quantum Codes ◽  
Discrete Variable ◽  
Long Distance ◽  
Concatenated Code ◽  
Different Types ◽  
Optical Modes ◽  
Distance Communication ◽  
Quantum Repeaters ◽  
Quantum Error

AbstractWe propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.

Analysis of Generation Mechanism of Photon-Number Squeezed Light Using Ultrashort Pulse and Asymmetric Fiber Loop Mirror

2000 ◽  
Vol 39 (Part 1, No. 11) ◽  
pp. 6243-6247 ◽  
Author(s):  
Junichi Higuchi ◽  
Norihiko Nishizawa ◽  
Masakazu Mori ◽  
Kazuo Yamane ◽  
Toshio Goto
Keyword(s):  
Ultrashort Pulse ◽  
Photon Number ◽  
Generation Mechanism ◽  
Squeezed Light ◽  
Fiber Loop Mirror ◽  
Loop Mirror ◽  
Fiber Loop

CONVERGENCE IMPROVEMENT OF ADAPTIVE LATTICE ALGORITHM WITH FUZZY BASED ADAPTIVE GAIN

1999 ◽  
Vol 09 (01n02) ◽  
pp. 125-132
Author(s):  
GEUN-TAEK RYU ◽  
DAE-SUNG KIM ◽  
DAE-YOUNG LEE ◽  
SUNG-HWAN HAN ◽  
HYEON-DEOK BAE
Keyword(s):  
Adaptive Filters ◽  
Communication Channel ◽  
Long Distance ◽  
Input And Output ◽  
Forward Prediction ◽  
Adaptation Procedure ◽  
Distance Communication ◽  
One Step ◽  
Input Variables ◽  
Lattice Algorithm

The choice of the adaptive gain is important to the performance of LMS-based adaptive filters. Depending on application areas, the realization structure of the filters is also important. This letter presents an adaptive lattice algorithm which adjusts the adaptive gain of LMS using fuzzy if-then rules determined by matching input and output variables during adaptation procedure. In each lattice filter stage, this filter adjusts the adaptive gain as the output of the fuzzy logic which has two input variables, normalized squared forward prediction error and one step previous adaptive gain. The proposed algorithm is applied to echo canceling problem of long distance communication channel. The simulation results are compared with NLMS on TDL and lattice structures.

Basic communication sciences

1969 ◽  
Vol 308 (1493) ◽  
pp. 183-198
Keyword(s):  
Long Distance ◽  
Earth Station ◽  
Early Communication ◽  
Technical Developments ◽  
Radiated Power ◽  
The Earth ◽  
Distance Communication ◽  
Quality Of Transmission ◽  
Communication Equipment

The feasibility and utility of long-distance communication via Earth-orbiting satellites has been demonstrated during recent years and it is appropriate therefore to focus attention on the more important scientific studies and technical developments that will be needed if full use is to be made of this valuable mode of communication in the future. The early communication satellites (the Telstar and Relay series) were pioneers in a relatively unknown propagation environment. The satellites themselves were conceptually simple and the communication equipment consisted essentially of a frequency-changing transponder with an r. f. power output of a few watts and a bandwidth some tens of megahertz. Carrier frequencies in the range 2 to 6 GHz were employed; typically either 2 or 6 GHz was used for transmission and 4 GHz for reception at the Earth station. To obtain an adequate signal/noise ratio at the output of the Earth station receiver, frequency modulation was employed, the frequency deviations being greater than those used on terrestrial microwave links. Launcher limitations and other factors meant that the satellites had to be placed in inclined elliptical orbits (see figure 1) with maximum heights of only a few thousand miles. Nevertheless, these satellites demonstrated that some hundreds of frequency-division multiplex telephony circuits, or a television channel, could be achieved with generally satisfactory quality of transmission. It is to be noted, however, that the satellite transponders accommodated only one, or at the most two, r. f. carriers at any time, and that the transmission performance was at times marginal due to limitations of the satellite effective radiated power. Furthermore, these relatively low orbit satellites provided communication in periods of generally less than an hour at a time and required continuous tracking by the Earth station aerials, due to movement of the satellites relative to the Earth.

scholarly journals Study of Optical Fiber Design Parameters in Fiber Optics Communications

2017 ◽  
Vol 2 (3) ◽  
pp. 302-308 ◽  
Author(s):  
Salim Qadir Mohammed ◽  
Asaad M. Asaad M. Al-Hindawi
Keyword(s):  
Optical Fiber ◽  
Fiber Optics ◽  
Numerical Aperture ◽  
Design Parameters ◽  
Light Sources ◽  
Long Distance ◽  
Graded Index ◽  
Large Bandwidth ◽  
Telecommunication Infrastructure ◽  
Distance Communication

Fiber optics is an important part in the telecommunication infrastructure. Large bandwidth and low attenuation are features for the fiber optics to provide gigabit transmission. Nowadays, fiber optics are used widely in long distance communication and networking to provide the required information traffic for multimedia applications. In this paper, the optical fiber structure and the operation mechanism for multimode and single modes are analyzed. The design parameters such as core radius, numerical aperture, attenuation, dispersion and information capacity for step index and graded index fibers are studied, calculated and compared for different light sources.

Sign in / Sign up

Export Citation Format

Share Document