scholarly journals Hi-speed USB signal long-distance communication and test scheme design based on Ethernet communication

2021 ◽  
Vol 632 ◽  
pp. 042060
Author(s):  
Shuo Zhang ◽  
Kui Deng ◽  
Ran Duan ◽  
Xiao Geng
Keyword(s):  
Test Scheme ◽  
Long Distance ◽  
Scheme Design ◽  
Distance Communication

SIGNAL PROCESSING IN LONG-DISTANCE COMMUNICATION SYSTEMS

2015 ◽  
Vol 74 (10) ◽  
pp. 895-904
Author(s):  
A. I. Litvin-Popovich ◽  
S.I. Pavlik
Keyword(s):  
Signal Processing ◽  
Communication Systems ◽  
Long Distance ◽  
Distance Communication

scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

scholarly journals Quantum repeaters based on concatenated bosonic and discrete-variable quantum codes

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Filip Rozpędek ◽  
Kyungjoo Noh ◽  
Qian Xu ◽  
Saikat Guha ◽  
Liang Jiang
Keyword(s):  
Continuous Variable ◽  
Quantum Codes ◽  
Discrete Variable ◽  
Long Distance ◽  
Concatenated Code ◽  
Different Types ◽  
Optical Modes ◽  
Distance Communication ◽  
Quantum Repeaters ◽  
Quantum Error

AbstractWe propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.

CONVERGENCE IMPROVEMENT OF ADAPTIVE LATTICE ALGORITHM WITH FUZZY BASED ADAPTIVE GAIN

1999 ◽  
Vol 09 (01n02) ◽  
pp. 125-132
Author(s):  
GEUN-TAEK RYU ◽  
DAE-SUNG KIM ◽  
DAE-YOUNG LEE ◽  
SUNG-HWAN HAN ◽  
HYEON-DEOK BAE
Keyword(s):  
Adaptive Filters ◽  
Communication Channel ◽  
Long Distance ◽  
Input And Output ◽  
Forward Prediction ◽  
Adaptation Procedure ◽  
Distance Communication ◽  
One Step ◽  
Input Variables ◽  
Lattice Algorithm

The choice of the adaptive gain is important to the performance of LMS-based adaptive filters. Depending on application areas, the realization structure of the filters is also important. This letter presents an adaptive lattice algorithm which adjusts the adaptive gain of LMS using fuzzy if-then rules determined by matching input and output variables during adaptation procedure. In each lattice filter stage, this filter adjusts the adaptive gain as the output of the fuzzy logic which has two input variables, normalized squared forward prediction error and one step previous adaptive gain. The proposed algorithm is applied to echo canceling problem of long distance communication channel. The simulation results are compared with NLMS on TDL and lattice structures.

Basic communication sciences

1969 ◽  
Vol 308 (1493) ◽  
pp. 183-198
Keyword(s):  
Long Distance ◽  
Earth Station ◽  
Early Communication ◽  
Technical Developments ◽  
Radiated Power ◽  
The Earth ◽  
Distance Communication ◽  
Quality Of Transmission ◽  
Communication Equipment

The feasibility and utility of long-distance communication via Earth-orbiting satellites has been demonstrated during recent years and it is appropriate therefore to focus attention on the more important scientific studies and technical developments that will be needed if full use is to be made of this valuable mode of communication in the future. The early communication satellites (the Telstar and Relay series) were pioneers in a relatively unknown propagation environment. The satellites themselves were conceptually simple and the communication equipment consisted essentially of a frequency-changing transponder with an r. f. power output of a few watts and a bandwidth some tens of megahertz. Carrier frequencies in the range 2 to 6 GHz were employed; typically either 2 or 6 GHz was used for transmission and 4 GHz for reception at the Earth station. To obtain an adequate signal/noise ratio at the output of the Earth station receiver, frequency modulation was employed, the frequency deviations being greater than those used on terrestrial microwave links. Launcher limitations and other factors meant that the satellites had to be placed in inclined elliptical orbits (see figure 1) with maximum heights of only a few thousand miles. Nevertheless, these satellites demonstrated that some hundreds of frequency-division multiplex telephony circuits, or a television channel, could be achieved with generally satisfactory quality of transmission. It is to be noted, however, that the satellite transponders accommodated only one, or at the most two, r. f. carriers at any time, and that the transmission performance was at times marginal due to limitations of the satellite effective radiated power. Furthermore, these relatively low orbit satellites provided communication in periods of generally less than an hour at a time and required continuous tracking by the Earth station aerials, due to movement of the satellites relative to the Earth.

scholarly journals Study of Optical Fiber Design Parameters in Fiber Optics Communications

2017 ◽  
Vol 2 (3) ◽  
pp. 302-308 ◽  
Author(s):  
Salim Qadir Mohammed ◽  
Asaad M. Asaad M. Al-Hindawi
Keyword(s):  
Optical Fiber ◽  
Fiber Optics ◽  
Numerical Aperture ◽  
Design Parameters ◽  
Light Sources ◽  
Long Distance ◽  
Graded Index ◽  
Large Bandwidth ◽  
Telecommunication Infrastructure ◽  
Distance Communication

Fiber optics is an important part in the telecommunication infrastructure. Large bandwidth and low attenuation are features for the fiber optics to provide gigabit transmission. Nowadays, fiber optics are used widely in long distance communication and networking to provide the required information traffic for multimedia applications. In this paper, the optical fiber structure and the operation mechanism for multimode and single modes are analyzed. The design parameters such as core radius, numerical aperture, attenuation, dispersion and information capacity for step index and graded index fibers are studied, calculated and compared for different light sources.

scholarly journals Installasi Base Transceiver Station (BTS) untuk Jaringan Node B pada Operator Hutchison 3 Indonesia (H3I)

2015 ◽  
Vol 11 (1) ◽  
pp. 78
Author(s):  
Uzma Septima ◽  
Lince Markis
Keyword(s):  
Receive Signal ◽  
Network Operator ◽  
Long Distance ◽  
New Process ◽  
Station Base ◽  
Communication Links ◽  
Distance Communication ◽  
Base Transceiver Station ◽  
In Transit ◽  
Made In

Base Transceiver Station is a device used to connect mobile-phone or smartphone in order to make long-distance communication, although in doing the movement or in transit from one place to another. Installation Base Transceiver Station for Network Node B At the operator Hutchison 3 Indonesia is done to make the operator Hutchison 3 Indonesia signal received by the phone for the better and not dashed when the user performs long-distance communication links with conditions in performing the movement or in the course of one place to another. Methods beginning the process of physical installation of Base Transceiver Station for Node B network in the operator Hutchison 3 Indonesia and order all the Base Transceiver Station can live well after the battery is connected to a rectifier and the required accuracy when performing the installation Base Transceiver Station. Furthermore, the integration process or Commissioning of the Base Transceiver Station for Node B network operator Hutchison 3 Indonesia on this in order to actively and After Commissioning obtained Receive Signal Level sectoral antennas of -59 dBm which can emit a signal as far as 7 km to 8 km , after the new process or Pointing connection between this new Base Transceiver Station Base Transceiver Station with preexisting and Pointing between Siak new Base Transceiver Station Base Transceiver Station Perawang with Perawang Students who have a distance of 5 km Receive Signal level of -32.4 dBm made in accordance with a budget link provided operator Hutchison 3 Indonesia is -30 dBm to -40 dBm.

scholarly journals Fabrication of Polyimide Optical Waveguide on Silicon Dioxide Layer Stacked Silicon Substrate

2017 ◽  
Vol 17 (2) ◽  
pp. 36
Author(s):  
Dadin Mahmudin ◽  
Shobih ◽  
Pamungkas Daud ◽  
Yusuf Nur Wijayanto
Keyword(s):  
Silicon Dioxide ◽  
Optical Fibers ◽  
Silicon Substrate ◽  
Optical Waveguides ◽  
Ultra Violet ◽  
Long Distance ◽  
Distance Communication ◽  
Paper Fabrication ◽  
Insertion Losses ◽  
Planar Optical Waveguides

Optical waveguides are important for guiding lightwave from a place to other places. Propagation and insertion losses of the optical waveguides should be considered to be in low values. Recently, optical waveguides with circular structures, which are optical fibers, are used widely for guiding lightwave in long-distance optical communication with very low propagation and insertion losses. Simultaneously, optical waveguides with planar structure are also developed for short distance communication in optical devices. We have reported design and analysis of the planar optical waveguides. In this paper, fabrication of planar optical waveguides using a polyimide material on thin silicon dioxide combined with the silicon substrate is reported. The polyimide material is used for the core of the optical waveguides. The silicon dioxide located on the silicon substrate and the air is used for cladding of the optical waveguides. Fabrication of the optical waveguides such as oxidation, photoresist coating, masking, ultra-violet exposure, and etching was done. The fabricated optical waveguides were characterized physically using a standard microscope and scanning electron microscope (SEM). The fabrication processes and characterization results are reported and discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document