scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

Field Study of Low-Energy Long-Distance Wireless Communication for IoT Application in Remote Areas

Mekatronika ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 52-62
Author(s):  
Kwai Yang Sak ◽  
Ahmad Najmuddin Ibrahim
Keyword(s):  
Radio Frequency ◽  
Long Range ◽  
Essential Element ◽  
Low Energy ◽  
Line Of Sight ◽  
Area Network ◽  
Structural Elements ◽  
Wide Area Network ◽  
Residential Areas ◽  
Long Distance

Long Range (LoRa) is a wireless radio frequency technology under the Low Power Wide Area Network (LPWAN). LoRa is able to communicate long range and low energy consumption. The communication range has become an essential element in the wireless radio frequency technology in the Internet of Things (IoT). The presence of LoRa is able IoT application performs in long communication distances with high noise sensitivity ability. People can operate, monitor, and do a variety of tasks from a remote distance. Therefore, this research aims to evaluate the performance of the LoRa connection between radio transceivers in remote locations. The different environment and structural elements affect the LoRa performance. This thesis will be supported by the experiment that LoRa communication in different environments and tests. This experiment tests in line of sight (LOS) and non-line of sight (NLOS). Two sets of LoRa parameters, including Spreading Factor (SF), Bandwidth, and coding rate, are tested in different environments. The experiment tests the LoRa performance in various aspects: received signal strength indicator (RSSI) and packet received ratio (PPR) at different coverage ranges. In addition, the LoRa performance is evaluated in university, residential areas and vegetation areas under similar temperature, weather, and time. The LoRa coverage distance in the vegetation area and university area is reached 900 meters in the LOS test. Still, the vegetation area's signal is more stable and able to receive weaker RSSI signals. The LoRa coverage distance in the NLOS test is shorter compared to the LOS test. NLOS test has only one-third of the LOS LoRa communication distance. It is due to the signal penetration on structural elements such as buildings and woods cause the signal power loss and only transmitting a shorter distance. The LoRa parameter with SF9, 31.25kHz bandwidth and 4/8 coding rate has a better coverage range and stable connection.

scholarly journals Rede de Sensores Sem Fio para Monitoramento de Variáveis de Ambiente

2020 ◽  
Author(s):  
Lucas José da Cunha ◽  
Paulo Roberto Oliveira Valim
Keyword(s):  
Energy Consumption ◽  
Power Consumption ◽  
Low Power ◽  
Long Range ◽  
Low Energy ◽  
Low Power Consumption ◽  
Low Energy Consumption

This research has the objective of implementing a sensors networkfor monitoring variable of environments using an IoT(Internet ofThings) technology focused on low energy consumption and longrange. The idea is to implement this network using LoRa technologyand LoRaWaN protocol. For a better utilization, it will be used andtested different LoRa parameters to communicate the nodes aimingshow the impacts of these parameters changes in long range, withconsistent data and low power consumption.

scholarly journals A Survey on LoRaWAN Technology: Recent Trends, Opportunities, Simulation Tools and Future Directions

Electronics ◽  
2022 ◽  
Vol 11 (1) ◽  
pp. 164
Author(s):  
Mukarram A. M. Almuhaya ◽  
Waheb A. Jabbar ◽  
Noorazliza Sulaiman ◽  
Suliman Abdulmalek
Keyword(s):  
Quality Of Service ◽  
Energy Consumption ◽  
Long Range ◽  
Wide Area ◽  
Small Data ◽  
Area Network ◽  
Wide Area Network ◽  
Simulation Tools ◽  
Comparative Review

Low-power wide-area network (LPWAN) technologies play a pivotal role in IoT applications, owing to their capability to meet the key IoT requirements (e.g., long range, low cost, small data volumes, massive device number, and low energy consumption). Between all obtainable LPWAN technologies, long-range wide-area network (LoRaWAN) technology has attracted much interest from both industry and academia due to networking autonomous architecture and an open standard specification. This paper presents a comparative review of five selected driving LPWAN technologies, including NB-IoT, SigFox, Telensa, Ingenu (RPMA), and LoRa/LoRaWAN. The comparison shows that LoRa/LoRaWAN and SigFox surpass other technologies in terms of device lifetime, network capacity, adaptive data rate, and cost. In contrast, NB-IoT technology excels in latency and quality of service. Furthermore, we present a technical overview of LoRa/LoRaWAN technology by considering its main features, opportunities, and open issues. We also compare the most important simulation tools for investigating and analyzing LoRa/LoRaWAN network performance that has been developed recently. Then, we introduce a comparative evaluation of LoRa simulators to highlight their features. Furthermore, we classify the recent efforts to improve LoRa/LoRaWAN performance in terms of energy consumption, pure data extraction rate, network scalability, network coverage, quality of service, and security. Finally, although we focus more on LoRa/LoRaWAN issues and solutions, we introduce guidance and directions for future research on LPWAN technologies.

LoRaWAN for an IoT-based environmental monitoring application in Tirana city

2021 ◽  
Author(s):  
Evjola Spaho ◽  
Aleksandër Biberaj ◽  
Ares Tahiraga
Keyword(s):  
Low Power ◽  
Environmental Monitoring ◽  
Long Range ◽  
Low Cost ◽  
Wide Area ◽  
Wide Area Networks ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Monitoring Application

AbstractRecently, low power wide area networks are attracting a lot of attention by the research community. They are wireless technologies characterized by large coverage area, low bandwidth and long battery life. One of these low power wide area networks technologies, the long range wide area network, can be used for different monitoring applications for health, agriculture, traffic, smart city.In this paper, different simulations and experiments are conducted to implement a low-cost long-range wide area network environmental monitoring application for Tirana city in Albania. Simulation and experimental data are compared and similar results were obtained. In the low-cost implemented system, the gateway can communicate with the sensors placed in strategic positions with long distance covered also using Radio Mobile software.

scholarly journals An End-To-End LwM2M-Based Communication Architecture for Multimodal NB-IoT/BLE Devices

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2239 ◽  
Author(s):  
Subho Shankar Basu ◽  
Jetmir Haxhibeqiri ◽  
Mathias Baert ◽  
Bart Moons ◽  
Abdulkadir Karaagac ◽  
...  
Keyword(s):  
Transport Layer ◽  
Area Network ◽  
Protocol Stack ◽  
Wireless Internet ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Data Rates ◽  
End To End ◽  
The Impact

The wireless Internet of Things (IoT) landscape is quite diverse. For instance, Low-Power Wide-Area Network (LPWAN) technologies offer low data rate communication over long distance, whereas Wireless Personal Area Network (WPAN) technologies can reach higher data rates, but with a reduced range. For simple IoT applications, communication requirements can be fulfilled by a single technology. However, the requirements of more demanding IoT use cases can vary over time and with the type of data being exchanged. This is pushing the design towards multimodal approaches, where different wireless IoT technologies are combined and the most appropriate one is used as per the need. This paper considers the combination of Narrow Band IoT (NB-IoT) and Bluetooth Low Energy (BLE) as communication options for an IoT device that is running a Lightweight Machine to Machine/Constrained Application Protocol (LwM2M/CoAP) protocol stack. It analyses the challenges incurred by different protocol stack options, such as different transfer modes (IP versus non-IP), the use of Static Context Header Compression (SCHC) techniques, and Datagram Transport Layer Security (DTLS) security modes, and discusses the impact of handover between both communication technologies. A suitable end-to-end architecture for the targeted multimodal communication is presented. Using a prototype implementation of this architecture, an in-depth assessment of handover and its resulting latency is performed.

scholarly journals Energy Constrained Optimization for Spreading Factor Allocation in LoRaWAN

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4417 ◽  
Author(s):  
Shusuke Narieda ◽  
Takeo Fujii ◽  
Kenta Umebayashi
Keyword(s):  
Energy Consumption ◽  
Performance Improvement ◽  
Long Range ◽  
Spread Spectrum ◽  
Average Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Spreading Factor ◽  
Average Energy Consumption ◽  
Distributed Genetic Algorithm

This paper discusses a spreading factor allocation for Long Range Wide Area Network (LoRaWAN). Because Long Range (LoRa) is based on chirp spread spectrum that each spreading factor is approximately orthogonal to each other, the performance of LoRaWAN can be enhanced by allocating the spreading factor appropriately to end devices (EDs). Several spreading factor allocation techniques have been reported. Techniques shown in existing studies can improve some characteristics (e.g. throughput or packet reception probability (PRP)); however, there are a few studies that have focused on the energy consumption of the EDs. The LoRa communication offers a low power communication and this enables the improvement of the performance in exchange for the energy consumption. This paper presents a performance improvement technique via spreading factor allocations for LoRaWAN. We define the optimization problem for the spreading factor allocation to maximize the PRP under a constraint for the average energy consumption of all the EDs. It enables for the performance improvement under the constraint of the average energy consumption of all the EDs by solving the problem. This study further develops a method to solve the defined problem based on a distributed genetic algorithm, which is metaheuristics method. Although the techniques shown in the existing studies give the average energy consumption as a result of the performance improvement by the spreading factor allocation, the presented technique can enhance the LoRaWAN performance by allocating the spreading factor to EDs under the constraint for the average energy consumption of all the EDs. Numerical examples validate the effectiveness of the presented technique. The PRP performance of the presented technique is superior to that of the techniques shown in the existing studies despite that the average energy consumption of all the EDs of the presented technique is less than that of the techniques shown in the existing studies.

scholarly journals Collision-Free Transmissions in an IoT Monitoring Application Based on LoRaWAN

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 4053
Author(s):  
Rahim Haiahem ◽  
Pascale Minet ◽  
Selma Boumerdassi ◽  
Leila Azouz Saidane
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Network Architecture ◽  
Multiple Access ◽  
High Efficiency ◽  
Pollution Monitoring ◽  
Delivery Ratio ◽  
Area Network ◽  
Wide Area Network ◽  
Air Pollution Monitoring

With the Internet of Things (IoT), the number of monitoring applications deployed is considerably increasing, whatever the field considered: smart city, smart agriculture, environment monitoring, air pollution monitoring, to name a few. The LoRaWAN (Long Range Wide Area Network)architecture with its long range communication, its robustness to interference and its reduced energy consumption is an excellent candidate to support such applications. However, if the number of end devices is high, the reliability of LoRaWAN, measured by the Packet Delivery Ratio (PDR), becomes unacceptable due to an excessive number of collisions. In this paper, we propose two different families of solutions ensuring collision-free transmissions. The first family is TDMA (Time-Division Multiple Access)-based. All clusters transmit in sequence and up to six end devices with different spreading factors belonging to the same cluster are allowed to transmit in parallel. The second family is FDMA (Frequency Divsion Multiple Access)-based. All clusters transmit in parallel, each cluster on its own frequency. Within each cluster, all end devices transmit in sequence. Their performance are compared in terms of PDR, energy consumption by end device and maximum number of end devices supported. Simulation results corroborate the theoretical results and show the high efficiency of the solutions proposed.

A Study on the Use of Bipolar-Particles-Electrodes in Decolorization of Dyeing Effluents and Its Principle

1987 ◽  
Vol 19 (3-4) ◽  
pp. 391-400 ◽  
Author(s):  
Zhou Ding ◽  
Cai Wei Min ◽  
Wang Qun Hui
Keyword(s):  
Energy Consumption ◽  
High Efficiency ◽  
Low Energy ◽  
Acid Dyes ◽  
Underlying Principle ◽  
Low Energy Consumption ◽  
Transparent Liquid

This paper studies the use of bipolar-particles-electrodes in the decolorization of dyeing effluents. Treatment of highly colored solutions of various soluble dyes (such as direct, reactive, cationic or acid dyes) and also samples of dyeing effluents gave rise to an almost colorless transparent liquid, with removal of CODcr and BOD5 being as high as over 80%. The method is characterized by its high efficiency, low energy consumption and long performance life. A discussion of the underlying principle is given.

Sign in / Sign up

Export Citation Format

Share Document