scholarly journals Aspergillus piperis A/5 from plum-distilling waste compost produces a complex of antifungal metabolites active against the phytopathogen Pythium aphanidermatum

2016 ◽  
Vol 68 (2) ◽  
pp. 279-289 ◽  
Author(s):  
Jelena Jovicic-Petrovic ◽  
Sanja Jeremic ◽  
Ivan Vuckovic ◽  
Sandra Vojnovic ◽  
Aleksandra Bulajic ◽  
...  
Keyword(s):  
Citric Acid ◽  
Solvent Extraction ◽  
Antifungal Activity ◽  
Aqueous Phase ◽  
Plant Pathogens ◽  
Complex Mixture ◽  
Pythium Aphanidermatum ◽  
Disease Suppression ◽  
Antifungal Metabolites ◽  
Culture Extract

Adding compost to soil can result in plant disease suppression through the mechanisms of antagonistic action of compost microflora against plant pathogens. The aim of the study was to select effective antagonists of Pythium aphanidermatum from compost, to assess the effect of its extracellular metabolites on the plant pathogen, and to characterize antifungal metabolites. The fungal isolate selected by a confrontation test was identified as Aspergillus piperis A/5 on the basis of morphological features and the internal transcribed spacer (ITS) region, ?-tubulin and calmodulin partial sequences. Liquid chromatography-mass spectroscopy (LC-MS) analysis showed that gluconic and citric acid were the most abundant in the organic culture extract. However, the main antifungal activity was contained in the aqueous phase remaining after the organic solvent extraction. The presence of considerable amounts of proteins in both the crude culture extract as well as the aqueous phase remaining after solvent extraction was confirmed by SDS-PAGE. Isolated Aspergillus piperis A/5 exhibits strong antifungal activity against the phytopathogen Pythium aphanidermatum. It secretes a complex mixture of metabolites consisting of small molecules, including gluconic acid, citric acid and itaconic acid derivatives, but the most potent antifungal activity was associated with proteins resistant to heat and organic solvents. Our findings about the activity and characterization of antagonistic strain metabolites contribute to the understanding of the mechanism of interaction of antifungal metabolites as well as fungal-fungal interaction. The obtained results provide a basis for further application development in agriculture and food processing.

scholarly journals The study of the antifungal activity of the Bacillus subtilis BZR 336g strain under the conditions of periodic cultivation with the addition of citric acid, corn extract and some microelements

2020 ◽  
Vol 21 ◽  
pp. 00015
Author(s):  
Anzhela Asaturova ◽  
Evgeny Gyrnets ◽  
Valeria Allakhverdian ◽  
Mikhail Astakhov ◽  
Ksenia Saenko
Keyword(s):  
Bacillus Subtilis ◽  
Citric Acid ◽  
Antifungal Activity ◽  
Liquid Culture ◽  
Complex Interaction ◽  
Crystalline Hydrate ◽  
Antifungal Metabolites ◽  
Qualitative And Quantitative ◽  
Test Culture ◽  
Combined Use

We studied the antifungal activity of the Bacillus subtilis BZR 336g strain against the test culture of the fungus Fusarium oxysporum var. orthoceras App. et Wr. BZR 6, depending on the addition of citric acid crystalline hydrate, a microelements solution and corn extract to the liquid nutrient medium. It was found that citric acid at a concentration of 15 g/l improves the bioavailability of microelements and increases antifungal activity. Corn extract and microelements without the formation of a chelate form with citric acid do not affect the fungicidal properties of B. subtilis BZR 336g. However, the corn extract at a concentration of 3 g / l increases the titer of bacteria in the liquid culture from 2 ± 0.1 × 108 to 1 ± 0.08 × 108 CFU/ml. The combined use of the studied components allowed us to achieve a significant increase in the antifungal activity of B. subtilis BZR 336g by 3.1 times. At the same time, the effect of synergism in their complex interaction was noted, which is probably due to a qualitative and quantitative change in the composition of B. subtilis BZR 336g antifungal metabolites.

Citric acid modified Ni3P as a catalyst for aqueous phase reforming and hydrogenolysis of glycerol to 1,2-PDO

2021 ◽  
Author(s):  
Tianyu Hu ◽  
Zhiquan Yu ◽  
Shan Liu ◽  
Bingyu Liu ◽  
Zhichao Sun ◽  
...  
Keyword(s):  
Particle Size ◽  
Citric Acid ◽  
Aqueous Phase ◽  
Small Particle ◽  
Small Particle Size ◽  
Temperature Programmed Reduction ◽  
Aqueous Phase Reforming ◽  
Temperature Programmed ◽  
Co Precipitation

Citric acid (CA) modified Ni3P catalysts with small particle size were prepared by H2 temperature-programmed reduction (H2-TPR) of the precursors, which were prepared by co-precipitation with Ni(NO3)2·6H2O and (NH4)2HPO4, using...

LTCC 3D FLOW FOCALIZATION DEVICE FOR LIQUID-LIQUID PARTIAL SOLVENT EXTRACTION

2016 ◽  
Vol 2016 (CICMT) ◽  
pp. 000111-000117
Author(s):  
Houari Cobas Gomez ◽  
Jéssica Gonçalves da Silva ◽  
Jocasta Mileski Machado ◽  
Bianca Oliveira Agio ◽  
Francisco Jorge Soares de Oliveira ◽  
...  
Keyword(s):  
Solvent Extraction ◽  
Aqueous Phase ◽  
Microfluidic Device ◽  
Flow Rate ◽  
Extraction Efficiency ◽  
Channel Length ◽  
Main Channel ◽  
Process Variables ◽  
3D Flow ◽  
Acetone Concentration

Abstract The present work shows a ceramics microfluidic device for partial solvent extraction scheme. The technology used for device fabrication was Low Temperature Cofired Ceramics (LTCC) which allows us for complex and chemical resistant 3D microfluidic devices. The proposed system aims to partially extract the solvent present in a mixture containing aqueous and organic phases. This scheme uses a 3D flow focalization in order to improve the solvent diffusion into the external aqueous phase. The device is composed by three different parts, the input channels distribution, the main channel and the output channels distribution. The designed input channels distribution ensures a centered 3D focalized solvent stream along the main channel. The focalized solvent mixes with the surrounding water thanks to diffusion. Projected output channels take the central fluid out separately from the surrounding. Thus the device has two different outputs, one for the focalized fluid and another one for the waste fluid, which is the aqueous phase plus solvent. For a device concept proof, acetone and water were used as organic and aqueous phases, respectively. COMSOL Multiphysics was used for device microfluidics and chemical transport simulation. The extraction efficiency was the variable used as indicator for device performance validation. The flow rate ratio between phases, total flow rate, main channel length and focalized stream channel output hydraulic diameter (ODH) were used as process variables for simulation purposes. A factorial experimental planning was used in order to analyze the extraction efficiency taking into account process variables effects. From simulation results it was determined main channel length and ODH as the variables with stronger effect on extraction efficiency. Obtained simulated efficiencies were as high as 80.6%. Considering previous results observations a microfluidic device was fabricated with a main channel length of 21,4 mm and ODH of 214,63 μm. Gas chromatography was used to measured acetone concentration in outputs samples and from here the extraction efficiency. Experimental results were in agreement with simulation, returning extraction efficiencies in the order of 80.8% ± 2.2%.

Sign in / Sign up

Export Citation Format

Share Document