scholarly journals GIS spatial analysis of the distribution of snow depth: A study of western Rhodopes, Bulgaria

2016 ◽  
Vol 96 (1) ◽  
pp. 46-55
Author(s):  
Valentina Nikolova ◽  
Aleksandar Penkov
Keyword(s):  
Spatial Analysis ◽  
Snow Cover ◽  
Snow Depth ◽  
Kriging Interpolation ◽  
Map Algebra ◽  
Explanatory Variables ◽  
Distance Weighted ◽  
Point Data ◽  
Gis Environment ◽  
Elevation Model

The aim of the present research is to show the advantages of information technology in investigating the snow cover. The snow data is usually taken from the measurement in meteorological stations which are often sparsely and insufficient. The problem in the analysis of the snow cover is how to present point data spatially and what is the most appropriate model. The area of the present research is the western part of Rhodopes mountain (Southern Bulgaria). The relief is variable from low to high mountainous and the climate is influenced by the high altitude and Mediterranean air advections. The spatial analysis of the distribution of snow depth is done in ArcGIS by application of Spatial Statistics Tools and Geostatistical Analyst. We considered altitude, aspect and slope as explanatory variables that could be used for determination of the territorial distribution of the snow depth. These factors are determined on the base of digital elevation model and the relationship between variables is evaluated by application of regression analysis, ordinary less squares (OLS) analysis and geographically weighted regression (GWR). The high values of R2 (above 0.7) show the representativeness of the model. A map of spatial distribution of snow depth is created by Map algebra in GIS environment, applying the regression equation of the relation snow depth - altitude. Inverse distance weighted and ordinary kriging interpolation are also carried out. The research shows that spatial presentation of point snow data and its interpretation should be done taking into account the relief and the exposition of the territory.

scholarly journals Estimating spatial distribution of daily snow depth with kriging methods: combination of MODIS snow cover area data and ground-based observations

2015 ◽  
Vol 9 (5) ◽  
pp. 4997-5020 ◽  
Author(s):  
C. L. Huang ◽  
H. W. Wang ◽  
J. L. Hou
Keyword(s):  
Spatial Distribution ◽  
Snow Cover ◽  
Snow Depth ◽  
Western China ◽  
Kriging Interpolation ◽  
Snow Cover Area ◽  
Smoothing Effects ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. Accurately measuring the spatial distribution of the snow depth is difficult because stations are sparse, particularly in western China. In this study, we develop a novel scheme that produces a reasonable spatial distribution of the daily snow depth using kriging interpolation methods. These methods combine the effects of elevation with information from Moderate Resolution Imaging Spectroradiometer (MODIS) snow cover area (SCA) products. The scheme uses snow-free pixels in MODIS SCA images with clouds removed to identify virtual stations, or areas with zero snow depth, to compensate for the scarcity and uneven distribution of stations. Four types of kriging methods are tested: ordinary kriging (OK), universal kriging (UK), ordinary co-kriging (OCK), and universal co-kriging (UCK). These methods are applied to daily snow depth observations at 50 meteorological stations in northern Xinjiang Province, China. The results show that the spatial distribution of snow depth can be accurately reconstructed using these kriging methods. The added virtual stations improve the distribution of the snow depth and reduce the smoothing effects of the kriging process. The best performance is achieved by the OK method in cases with shallow snow cover and by the UCK method when snow cover is widespread.

scholarly journals Mapping snow cover and snow depth across the Lake Limnopolar watershed on Byers Peninsula, Livingston Island, Maritime Antarctica

2013 ◽  
Vol 25 (2) ◽  
pp. 157-166 ◽  
Author(s):  
S.R. Fassnacht ◽  
J.I. López-Moreno ◽  
M. Toro ◽  
D.M. Hultstrand
Keyword(s):  
Snow Cover ◽  
Snow Depth ◽  
Regression Trees ◽  
Snow Accumulation ◽  
Maritime Antarctica ◽  
Density Profiles ◽  
Livingston Island ◽  
Digital Elevation ◽  
Depth Classification ◽  
Elevation Model

AbstractFew parts of Antarctica are not permanently covered in ice. The retreat of the ice sheet from Byers Peninsula on western Livingston Island, Maritime Antarctica, has provided a new area of seasonal snow cover. Snow surveys were conducted in late November 2008 at the time of peak accumulation across the 1 km2 Lake Limnopolar watershed. Topographic variables were derived from a digital elevation model to determine the variables controlling the presence or absence of snow and the distribution of snow depth. Classification with binary regression trees showed that wind related variables dominated the presence and depth of snow. The product of the sine of aspect and the sine of slope was the first variable in both regression trees. Density profiles were also measured and illustrated a relatively homogeneous snowpack over space at peak snow accumulation.

scholarly journals Spatio-Temporal Variation Characteristics of Snow Depth and Snow Cover Days over the Tibetan Plateau

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 307
Author(s):  
Chi Zhang ◽  
Naixia Mou ◽  
Jiqiang Niu ◽  
Lingxian Zhang ◽  
Feng Liu
Keyword(s):  
Tibetan Plateau ◽  
Snow Cover ◽  
Snow Depth ◽  
Feedback Effect ◽  
Effect Of Temperature ◽  
The Tibetan Plateau ◽  
Reanalysis Dataset ◽  
Spatio Temporal ◽  
The Impact ◽  
Main Factor

Changes in snow cover over the Tibetan Plateau (TP) have a significant impact on agriculture, hydrology, and ecological environment of surrounding areas. This study investigates the spatio-temporal pattern of snow depth (SD) and snow cover days (SCD), as well as the impact of temperature and precipitation on snow cover over TP from 1979 to 2018 by using the ERA5 reanalysis dataset, and uses the Mann–Kendall test for significance. The results indicate that (1) the average annual SD and SCD in the southern and western edge areas of TP are relatively high, reaching 10 cm and 120 d or more, respectively. (2) In the past 40 years, SD (s = 0.04 cm decade−1, p = 0.81) and SCD (s = −2.3 d decade−1, p = 0.10) over TP did not change significantly. (3) The positive feedback effect of precipitation is the main factor affecting SD, while the negative feedback effect of temperature is the main factor affecting SCD. This study improves the understanding of snow cover change and is conducive to the further study of climate change on TP.

Spatial Analysis: Modelling in a GIS Environment

1998 ◽  
Vol 164 (1) ◽  
pp. 104
Author(s):  
David Unwin ◽  
Paul Longley ◽  
Michael Batty
Keyword(s):  
Spatial Analysis ◽  
Gis Environment

scholarly journals Assimilation of snow cover and snow depth into a snow model to estimate snow water equivalent and snowmelt runoff in a Himalayan catchment

2017 ◽  
Vol 11 (4) ◽  
pp. 1647-1664 ◽  
Author(s):  
Emmy E. Stigter ◽  
Niko Wanders ◽  
Tuomo M. Saloranta ◽  
Joseph M. Shea ◽  
Marc F. P. Bierkens ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Data Assimilation ◽  
Snow Cover ◽  
Climate Sensitivity ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Snowmelt Runoff ◽  
Snow Water ◽  
Snow Model

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However, snow cover data provide no direct information on the actual amount of water stored in a snowpack, i.e., the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ observations and a modified version of the seNorge snow model to estimate (climate sensitivity of) SWE and snowmelt runoff in the Langtang catchment in Nepal. Snow cover data from Landsat 8 and the MOD10A2 snow cover product were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an ensemble Kalman filter (EnKF). Independent validations of simulated snow depth and snow cover with observations show improvement after data assimilation compared to simulations without data assimilation. The approach of modeling snow depth in a Kalman filter framework allows for data-constrained estimation of snow depth rather than snow cover alone, and this has great potential for future studies in complex terrain, especially in the Himalayas. Climate sensitivity tests with the optimized snow model revealed that snowmelt runoff increases in winter and the early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature. At high elevation a decrease in SWE due to higher air temperature is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature.

scholarly journals Distributed snow and rock temperature modelling in steep rock walls using Alpine3D

2017 ◽  
Vol 11 (1) ◽  
pp. 585-607 ◽  
Author(s):  
Anna Haberkorn ◽  
Nander Wever ◽  
Martin Hoelzle ◽  
Marcia Phillips ◽  
Robert Kenner ◽  
...  
Keyword(s):  
Energy Balance ◽  
Snow Cover ◽  
Snow Depth ◽  
Spatial Scales ◽  
Swiss Alps ◽  
Balance Model ◽  
Near Surface ◽  
Surface Rock ◽  
Depth Data ◽  
Rock Temperature

Abstract. In this study we modelled the influence of the spatially and temporally heterogeneous snow cover on the surface energy balance and thus on rock temperatures in two rugged, steep rock walls on the Gemsstock ridge in the central Swiss Alps. The heterogeneous snow depth distribution in the rock walls was introduced to the distributed, process-based energy balance model Alpine3D with a precipitation scaling method based on snow depth data measured by terrestrial laser scanning. The influence of the snow cover on rock temperatures was investigated by comparing a snow-covered model scenario (precipitation input provided by precipitation scaling) with a snow-free (zero precipitation input) one. Model uncertainties are discussed and evaluated at both the point and spatial scales against 22 near-surface rock temperature measurements and high-resolution snow depth data from winter terrestrial laser scans.In the rough rock walls, the heterogeneously distributed snow cover was moderately well reproduced by Alpine3D with mean absolute errors ranging between 0.31 and 0.81 m. However, snow cover duration was reproduced well and, consequently, near-surface rock temperatures were modelled convincingly. Uncertainties in rock temperature modelling were found to be around 1.6 °C. Errors in snow cover modelling and hence in rock temperature simulations are explained by inadequate snow settlement due to linear precipitation scaling, missing lateral heat fluxes in the rock, and by errors caused by interpolation of shortwave radiation, wind and air temperature into the rock walls.Mean annual near-surface rock temperature increases were both measured and modelled in the steep rock walls as a consequence of a thick, long-lasting snow cover. Rock temperatures were 1.3–2.5 °C higher in the shaded and sunny rock walls, while comparing snow-covered to snow-free simulations. This helps to assess the potential error made in ground temperature modelling when neglecting snow in steep bedrock.

scholarly journals Validation of MODIS snow cover images over Austria

2006 ◽  
Vol 3 (4) ◽  
pp. 1569-1601 ◽  
Author(s):  
J. Parajka ◽  
G. Blöschl
Keyword(s):  
Snow Cover ◽  
Classification Accuracy ◽  
Snow Depth ◽  
Seasonal Pattern ◽  
Acquisition Time ◽  
Spatial And Temporal Variability ◽  
Temporal Shift ◽  
Early Afternoon ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. This study evaluates the Moderate Resolution Imaging Spectroradiometer (MODIS) snow cover product over the territory of Austria. The aims are (a) to analyse the spatial and temporal variability of the MODIS snow product classes, (b) to examine the accuracy of the MODIS snow product against in situ snow depth data, and (c) to identify the main factors that may influence the MODIS classification accuracy. We use daily MODIS grid maps (version 4) and daily snow depth measurements at 754 climate stations in the period from February 2000 to December 2005. The results indicate that, on average, clouds obscured 63% of Austria, which may significantly restrict the applicability of the MODIS snow cover images to hydrological modelling. On cloud-free days, however, the classification accuracy is very good with an average of 95%. There is no consistent relationship between the classification errors and dominant land cover type and local topographical variability but there are clear seasonal patterns to the errors. In December and January the errors are around 15% while in summer they are less than 1%. This seasonal pattern is related to the overall percentage of snow cover in Austria, although in spring, when there is a well developed snow pack, errors tend to be smaller than they are in early winter for the same overall percent snow cover. Overestimation and underestimation errors balance during most of the year which indicates little bias. In November and December, however, there appears to exist a tendency for overestimation. Part of the errors may be related to the temporal shift between the in situ snow depth measurements (07:00 a.m.) and the MODIS acquisition time (early afternoon).

scholarly journals High spatial resolution digital elevation model (DEM) production using different interpolations techniques

2019 ◽  
Vol 11 (21) ◽  
pp. 116-126
Author(s):  
Israa Jameel Muhsin
Keyword(s):  
Spatial Resolution ◽  
University Campus ◽  
Interpolation Methods ◽  
Natural Neighbor ◽  
Digital Elevation ◽  
Global Positioning ◽  
Distance Weighted ◽  
Elevation Model ◽  
Accuracy Assessments ◽  
Inverse Distance

DEMs, thus, simply regular grids of elevation measurements over the land surface.The aim of the present work is to produce high resolution DEM for certain investigated region (i.e. Baghdad University Campus\ college of science). The easting and northing of 90 locations, including the ground-base and buildings of the studied area, have been obtained by field survey using global positioning system (GPS). The image of the investigated area has been extracted from Quick-Bird satellite sensor (with spatial resolution of 0.6 m). It has been geo-referenced and rectified  using 1st order polynomial transformation. many interpolation methods have been used to estimate the elevation such as ordinary Kriging, inverse distance weighted (IDW) and  natural neighbor methods. The mosaic  algorithm has then been applied between the base and building layers of studied area in order to perform the final DEM. The accuracy assessments of the interpolation methods have been calculated using the root-mean-square-error (RMSE) criterion. Finally, the estimated DEMs have been used to constructing 3-D views of the original image.

Sign in / Sign up

Export Citation Format

Share Document