scholarly journals Genetic variability and association of characters in Ethiopian hot pepper (Capsicum annum L.) landraces

2016 ◽  
Vol 61 (1) ◽  
pp. 19-36 ◽  
Author(s):  
Shimeles Aklilu ◽  
Bekele Abebie ◽  
Dagne Wogari ◽  
Adeferis T/Wolde

Forty nine hot pepper accessions collected from different agroecologies were compared in a 7x7 simple lattice design to estimate genetic variability and understand the association of characters. Plant characters and yield components were evaluated and analyzed accordingly. The values of genotypic correlation coefficients were higher in magnitude than phenotypic values in most instances in which fruit yield per plant showed high positive significant genotypic correlation value with pericarp thickness (r = 0.91) and number of fruits per plant (r = 0.61). On the other hand, significant negative associations were registered with days to flowering (r = -0.73) and 50% fruiting period (r = -0.75). The phenotypic correlation coefficient of most characters with yield was not significant except for flowering period, fruit length and number of fruits per plant. The path coefficient analysis indicated that pericarp thickness (mm) (5.5), fruit diameter (mm) (1.4), number of fruits per plant (0.8), number of branches (0.33) and flowering period (0.2) had the highest direct positive effect. However, fruit weight (-2.8), number of internodes (-1.66), leaf area index (-1.6) and plant height (-0.4) had a high negative direct effect on yield. The genetic component analysis indicated that phenotypic coefficient of variation (PCV) was higher in magnitude than genotypic coefficient of variation (GCV) for most characters except pericarp thickness and leaf area index. Higher magnitude of GCV was observed in leaf area index (67%) followed by pericarp thickness (34%), number of branches, internode length (23%) and plant height. Close estimates of GCV and PCV were recorded from fruit and internode length, pericarp thickness and fruiting period. Very high PCV and very low GCV estimates were obtained from fruit weight and number of fruits, fruit yield, plant height and canopy width. Broad sense heritability was high for fruiting date, fruit length, plant height, internode length and fruit diameter. However, genetic advance as percent of the mean (GAM) was high to moderate for length and number of internodes, number of branches, fruit diameter and weight, pericarp thickness and leaf area index. Therefore, from this study, fruit diameter, pericarp thickness, leaf area index and internode length exhibited high to moderate genotypic and phenotypic coefficients of variation along with medium to high heritability and genetic advance and can be used as a selection criterion for pepper improvement program.

Author(s):  
N. Karthika ◽  
V. Sundaram

The studies on heterosis in bhendi was conducted with 20 F1­’s developed from 9 parents viz., SKY/DR/RS/107 (L1), 3 (L2), IC 69257 (L3), 307-10-1-II (L4), 608-8-1 (T1), 770 (T2), IC 140880 (T3), 137-10-1,2 (T4) and Tiruchi Local (T5) in a Line x Tester mating design. The hybrids along with parents were evaluated in RBD with three replications. The hybrid L2 x T3 was considered the best as it has recorded higher magnitude of heterobeltiosis for plant height at flowering (17.49 per cent), plant height at final harvest (42.95 per cent), leaf area index (64.21 per cent), stem diameter (82.79 per cent), fruit length (22.98 per cent), fruit girth (6.17 per cent), number of fruits plant-1 (42.70 per cent) and yield plant-1 (57.77 per cent). The maximum heterotic vigour was found in L2 x T2 for fruit weight (47.24 per cent) and number of fruits plant-1 (96.67 per cent).


2018 ◽  
Vol 32 (2) ◽  
pp. 68
Author(s):  
Leviana Eka Vivia ◽  
Trijono Djoko Sulistyo ◽  
Mujiyo Mujiyo

<p align="left"><em>The research aims to assess the yield of baby kale that can be consumed almost all of the parts and generate organic manure free. Field research was conducted in Sindon Village, Ngemplak, Boyolali in September to October 2016. The research method uses Randomized Complete Block Design factorial with two factors, these are the dosage of manure and the age of harvest. Manure consisted of 4 doses O1 (0 ton/ha), O2 (6 tons/ha) and O3 (8 tons/ha) and O4 (10 tons/ha), and age of harvest consisted of P1 (16 DAS), P2 (20 DAS), and P3 (24 DAS). Variables observed were plant height, number of leaves, internode length, fresh weight, dry weight, leaf area index, and harvest index. The result showed that age of harvest has significant influence plant height, internode length, the number of leaves, leaf area index, fresh weight, dry weight, and harvest index. Manure doses only influence dry weight. Manure dosage of 8 ton/ha and harvest age of 16 DAS is the best combination of baby kale. Manure dosage of 10 ton/ha and harvest age of 16 DAS produce baby kale that can be consumed almost in all parts of the plant with the highest harvest index that is equal to 0.83.</em></p>


2013 ◽  
Vol 5 (2) ◽  
pp. 371-381 ◽  
Author(s):  
K. K. Paul ◽  
M. A. B. Miah

An investigation has been made to characterize the local accessions of Elephant foot yam collected from thirteen aroid growing districts and in-depth study on genetic variability, correlation and path coefficient for plant height, petiole length, petiole breadth, leaf area index, corm length, corm breadth, corm weight, cormel number, cormel length, cormel breadth, cormel weight and yield per plant has also been carried out. Genotypic variances and coefficient of variation for most of the characters were remarkably higher than their corresponding environmental variances, which also indicate the existence of variation in genotypic origin. High heritability with high genetic advance in percentage of mean was also observed for all characters. In the correlation study plant height, leaf area index, corm length, corm breadth, corm weight, cormel number, cormel length, cormel breath showed positive correlation with yield per plant in genotypic and phenotypic level. Leaf area index, cormel number in phenotypically and cormel number in genotypic level showed relatively high positive direct effect on yield per plant.Keywords: Amorphophallus; Genetic variability; Correlation; Path coefficient.© 2013 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.doi: http://dx.doi.org/10.3329/jsr.v5i2.13853        J. Sci. Res. 5 (2), 371-381 (2013)


1996 ◽  
Vol 21 (1) ◽  
pp. 241-241
Author(s):  
Gene Burris ◽  
Don Cook ◽  
B. R. Leonard ◽  
J. B. Graves ◽  
J. Pankey

Abstract The test was conducted at the Northeast Research Station in St. Joseph, LA. Plots were replicated 4 times in a RCB design and were four rows (40-inch spacing) X 65 ft. ‘Stoneville LA 887’ cotton seed was planted 2 and 3 May on a commerce silt soil which was fertilized sidedress with 90 lb N/acre. Cotton seed were planted with a John Deere model 7100 series planter which was equipped with 10 inch seed cones mounted to replace the seed hoppers. The seed rate was 4 seed/row ft. Granular in-furrow treatments were applied with 8 inch belt cone applicators mounted to replace the standard granular applicators. Control of thrips and aphids was evaluated on 5 randomly selected plants/plot. Evaluations were made on 18, 19, 24, 26, and 29 May and 8 Jun. Plant height counts were taken on 10 randomly selected plants/plot on 8 Jun. Stand density and leaf area was determined by counting the number of plants in a randomly selected meter on 29 May. Leaf area was recorded using a Li Cor leaf area machine. The data was recorded as cm2 and converted to a leaf area index (LAI). Major pests and/or secondary pest control was initiated in Jun and continued on an “as needed” basis through Aug.


2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Samuel Maina ◽  
Rossa Nyoike Ng’endo

Maize (Zea mays L.) is a significant food security crop in Kenya and it serves as the main source of nutrition and calories among the small-holder farmers. The overall maize yields per hectare have been fluctuating in the past few years posing a great risk to food security. Among the stress factors associated with maize yield loss include plant-feeding nematodes. In this regard, this study was conducted to evaluate the impacts of plant-parasitic nematodes specifically Scutellonema spp. under field conditions on maize performance in Mwea, Kenya. The field trials were laid out in a randomized complete block design with each treatment comprising of four replicates. The treatments included maize plots without nematicide (MPWN) and control plots treated with nematicide. The experiments were conducted in two trials. Soil samples were taken at a 0–20 cm depth at monthly intervals during 2018–2019. During the two trials, MPWN recorded significantly lower plant height and number of leaves per plant. Correlation analysis revealed a significant negative relationship between Scutellonema abundance with leaf area index, plant height, and number of functional leaves in MPWN during the 2019 trial. This implies that high population of Scutellonema perhaps has the potential to affect leaf area index, plant height, number of leaves per plant, which are aspects that in turn influence maize productivity. Therefore, holistic sustainable management practices to control Scutellonema spp. in maize fields such as use of organic amendments, resistant maize cultivars, and antagonistic organisms are crucial in order to alleviate negative impacts linked to Scutellonema infestation.


Water ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 6 ◽  
Author(s):  
Milad Mahmoodzadeh ◽  
Phalguni Mukhopadhyaya ◽  
Caterina Valeo

A comprehensive parametric analysis was conducted to evaluate the influence of the green roof design parameters on the thermal or energy performance of a secondary school building in four distinctively different climate zones in North America (i.e., Toronto, ON, Canada; Vancouver, BC, Canada; Las Vegas, NV, USA and Miami, FL, USA). Soil moisture content, soil thermal properties, leaf area index, plant height, leaf albedo, thermal insulation thickness and soil thickness were used as design variables. Optimal parameters of green roofs were found to be functionally related to meteorological conditions in each city. In terms of energy savings, the results showed that the light-weight substrate had better thermal performance for the uninsulated green roof. Additionally, the recommended soil thickness and leaf area index for all four cities were 15 cm and 5 respectively. The optimal plant height for the cooling dominated climates is 30 cm and for the heating dominated cities is 10 cm. The plant albedo had the least impact on the energy consumption while it was effective in mitigating the heat island effect. Finally, unlike the cooling load, which was largely influenced by the substrate and vegetation, the heating load was considerably affected by the thermal insulation instead of green roof design parameters.


2017 ◽  
Vol 5 (4) ◽  
pp. 423-429 ◽  
Author(s):  
Mohan Mahato ◽  
Bishnu Bilas Adhikari

A field experiment was conducted under humid subtropical agro-climatic condition of Nepal during rainy season of 2014. The experiment was laid out in to two factor Randomized Complete Block Design with  three replications consisting three drought tolerant rice varieties (Sukhadhan-4, Sukhadhan-5 and Radha-4) and four planting geometry (15 cm × 10 cm, 15 cm × 15 cm, 20 cm × 15 cm and 20 cm × 20 cm). The results revealed that the highest plant height and maximum leaf area index was recorded in planting geometry 15 cm × 10 cm in all growth stages. Whereas, planting geometry 20 cm × 15 cm produced the maximum number of tiller m-2 in all growth stage.  While planting geometry 20 cm × 15 cm and 20 cm × 20 cm produced statistically similar crop growth rate and dry matter accumulation in all stage of growth. Regarding the varieties, Sukhadhan- 4 showed highest plant height up to 75 DAT and plant height was statistically similar to Radha - 4 in 60 and 75 DAT. But maximum number of tiller m-2, leaf area index, crop growth rate and dry matter accumulation were recorded in Sukhadhan – 5 varieties. Int. J. Appl. Sci. Biotechnol. Vol 5(4): 423-429


Author(s):  
Rupinder Kaur Jassal ◽  
Harmeet Singh

An experiment was conducted at Punjab Agricultural University, Ludhiana during 2015 and 2016 to study the effect of priming, different seed rate on growth and seed yield of soybean planted under bed and flat method. The study was planned in factorial split plot design, keeping two planting techniques (flat sowing and bed sowing) and two seed priming treatments ( non primed seeds and 100 ppm GA3 primed seeds) in main plot and three seed levels ( 50, 62.5 and 75 kg ha-1) in sub plot. The objective of the study was to evaluate the effect of seed priming on growth and productivity under different planting techniques with the use of varying seed rates. The results revealed that growth attributes viz. emergence count, plant height, dry matter accumulation, leaf area index and photosynthetic active radiation interception (%) was significantly higher under bed planting technique as compared to flat sowing method. The pooled seed yield was increased by 15.6 % in bed planted soybean crop as compared to flat planted crop. Soybean seeds primed with 100 ppm GA3 recorded significant results in all the growth parameters. Primed seed recorded increase in yield 15.3 % than non primed seeds. Seed rate of 62.5 kg ha-1 recorded significantly higher emergence count, plant height, dry matter accumulation, leaf area index and photosynthetic active radiation interception (%) which was statistically similar in results with 75 kg ha-1 seed rate in both the two years. Pooled seed yield of 62.5 kg ha-1seed rate was 4.61 % higher than 75 kg ha-1 and 12.6 % than 50 kg ha-1 seed rate.


2020 ◽  
Vol 3 (2) ◽  
pp. 50-55
Author(s):  
Ramhari Gaire ◽  
Chudamani Pant ◽  
Nischal Sapkota ◽  
Rajan Dhamaniya ◽  
Tej Narayan Bhusal

AbstractA field experiment was carried out to study the effect of spacing and nitrogen level on growth and yield of maize in Parbat from February to July, 2019. The experiment was laid out in two Factorial Randomized complete Block Design (RCBD) comprising of spacing: 60×15 cm and 60×25 cm and nitrogen: 30, 60, 90 and 120 kg/ha level as treatment with three replications. “Arun-2” variety of maize was planted on clay loam and acidic soil (pH 5.3) having medium in total nitrogen (0.15%), medium in soil available phosphorus (48.1 kg/ha), medium in soil available potassium (218.8 kg/ha) and medium in organic matter content (2.92%). Result shows that yield was significantly increased with increment in N-level up to 90 kg N/ha. The grain yield (5.18 mt/ha) was significantly higher at 90 kg N/ha than at 30 and 60 kg N/ha but at par with 120 kg N/ha. Significant effect on grain yield due to spacing was observed. The grain yield (4.11 mt/ha) obtained at spacing 60×15 cm. Moreover, the highest grain yield showed that highest grain yield (4.33 mt/ha) was obtained under 90 kg N/ha plus 60×15 cm spacing. The result revealed that different spacing and nitrogen level significantly affect the plant height and leaf area index. The plant height and leaf area index were significantly high at close spacing (60×15 cm) and at 120 kg N/ha. Likewise, yield attributing characteristics like cob length, cob diameter, number of kernel/rows, number of kernel row, thousand gran weight were the highest at 90 kg/ha but as par with 120 kg/ha at close spacing (60×15 cm). This study suggested that maize production can be maximized by cultivating “Arun-2” maize fertilizing with 90 kg N/ha and maintaining 60×15 cm spacing.


2015 ◽  
Vol 50 (1) ◽  
pp. 47-52
Author(s):  
KK Paul ◽  
MA Bari

Plant height, leaf length, leaf breadth, leaf number, leaf area index, corm length, corm breadth, corm weight, sucker number exhibited positive correlation with yield per plant in both genotypic and phenotypic level in cocoyam (Xanthosoma sagittifolium). Path coefficient analysis revealed that leaf length, leaf number, corm length exhibited direct influences to yield per plant. In genotypic level yield per plant showed the highest positive direct effect with corm length followed by cormel breadth, sucker number.Bangladesh J. Sci. Ind. Res. 50(1), 47-52, 2015


Sign in / Sign up

Export Citation Format

Share Document